Fully coupled elastoplastic hydro-mechanical analysis of unsaturated porous media using a meshfree method

This paper presents the first application of an advanced meshfree method, ie, the edge-based smoothed point interpolation method (ESPIM), in simulation of the coupled hydro-mechanical behaviour of unsaturated porous media. In the proposed technique, the problem domain is spatially discretised using a triangular background mesh, and the polynomial point interpolation method combined with a simple node selection scheme is adopted for creating nodal shape functions. Smoothing domains are formed on top of the background mesh, and a constant smoothed strain, created by applying the smoothing operation over the smoothing domains, is assigned to each smoothing domain. The deformation and flow models are developed based on the equilibrium equation of the mixture, and linear momentum and mass balance equations of the fluid phases, respectively. The effective stress approach is followed to account for the coupling between the flow and deformation models. Further coupling among the phases is captured through a hysteretic soil water retention model that evolves with changes in void ratio. An advanced elastoplastic constitutive model within the context of the bounding surface plasticity theory is employed for predicting the nonlinear behaviour of soil skeleton. Time discretisation is performed by adopting a three-point discretisation method with growing time steps to avoid temporal instabilities. A modified Newton-Raphson framework is designed for dealing with nonlinearities of the discretised system of equations. The performance of the numerical model is examined through a number of numerical examples. The state-of-the-art computational scheme developed is useful for simulation of geotechnical engineering problems involving unsaturated soils.     

用双三次样条函数和GPS资料反演现今中国大陆构造形变场

将中国大陆现今构造变动视为一种连续的地壳变形,利用双三次样条函数模拟了近期GPS测定的大陆内部及周边地区412个测站速率,反演大陆地区自洽的构造变动速度场和应变率场.模拟结果显示:印度板块与欧亚板块的碰撞、挤压是构成中国大陆内部岩石层水平形变的主要驱动力.印度板块在东喜马拉雅构造结深深插入青藏高原,造成地壳大规模的缩短和抬升.青藏高原东南部的喜马拉雅带、拉萨和羌塘地块以及青藏高原东南边的川滇地区,内部构造活动强烈,其内部的构造变形包含地壳碎片的冲断、褶皱和侧向逃逸.大陆地壳(或岩石圈)的增厚,尤其是喜马拉雅山脉南北向的快速缩短和青藏高原东西向的缓慢拉张,大约吸收了印欧板块会聚量的85%,西藏中东地区东西向的拉张速率达到了(16±2.0)mm/a,且顺时针方向扭转明显.印度板块相对欧亚板块运动的欧拉极为(29.7°N, 19.3°E, 0.392°/Ma);华南地块相对于欧亚大陆向东(102°±7.4°)南的运动速率是(11±1.54)mm/a,华南块体相对欧亚板块运动的欧拉极为(62.25°N, 126.56°E, 0.141°/Ma);塔里木地块相对较稳定,其西部运动速度高于东部运动速度,作顺时针方向旋转.总体上讲,中国大陆运动方向为北偏东呈辐射状,从西部近南北方向的运动转向东部地区东南方向的运动,绕东喜马拉雅构造结有一顺时针方向的旋转.横穿喜马拉雅构造带及青藏内部的南北向压缩速率为(19±2.0)mm/a,横穿西天山构造带的南北向压缩平均速率为(13±1.5)mm/a,横穿东天山构造带的南北向压缩平均速率为(6.0±1.4)mm/a.阿尔金断裂带的左旋走滑速率为(6±1.2)mm/a.     

SAMPLING REMOTELY SENSED IMAGERY FOR STORAGE,RETRIEVAL, AND RECONSTRUCTION*

A major difficulty in remote sensing is handling the many data from sensors aboard aircraft and satellites. In this paper we identify an optimal procedure for sampling remotely sensed data before their storage or on their retrieval. The procedure depends on spatial correlation in the scene and uses kriging to estimate values that have been lost. An example in which data from an airborne multispectral scanner could be diminished to only about one tenth without serious loss of precision illustrates the method.     

重力插值方法研究

为了根据离散观测数据构制连续空间重力变化图像，分析和讨论了３种数值插值方法，计算结果表明多面函数方法插值精度最高。由于逐步回归分析筛选核函数中心点的计算繁琐，文中提出根据分形理论和Ｓｈａｎｎｏｎ取样定理来确定核函数中心点。对滇西试验场进行模拟试算，插值精度可达到４～５（１０－８ｍｓ－２）。     

三维斜压模式对冬季南海环流的数值计算

用一个三维、自由表面、原始方程模式对南海环流进行了计算.计算结果表明:黑潮在巴士海峡以西呈一反气旋弯曲流动路径,有一相对高温高盐的水舌从巴士海峡伸入南海,表明有部分黑潮水侵入南海.冬季南海的一些观测事实在模式结果里得到了很好的反映,像冬季逆风向东北方向流动的“南海暖流”和一些中尺度涡旋.同时还分析了巴士海峡沿120.75°E断面的流速和盐度的垂直结构,并同观测结果进行了比较.根据模式结果,我们还进一步讨论了“南海暖流”的形成和驱动机制.     

北部湾三维潮流场数值研究(英文)

本文对北部湾三维潮波进行了数值研究,并将所得结果与现有观测资料作了比较。通过比较发现两者相当一致。文中还绘制了M_2和K_1分潮的同潮图,并对其作了讨论。可以断定,北部湾的日潮优势是由日潮共振所引起的。M_2和K_1分潮流的水平分布表明,强流区位于它们各自的蜕化无潮点附近。还讨论了分潮流的铅直结构,可以看出这种结构十分接近实际分潮流场的特征。     

Triple diagram method for the prediction of wave height and period

Many formulations have been developed so far to predict the wave height and period from fetch length and wind blowing duration for a constant wind speed. This study aimed to predict wave parameters from fetch length and meteorological factors by using triple diagram methodology based on Kriging principles. Proposed model results were compared with Joint North Sea Wave Project (JONSWAP) model which is used so commonly in the ocean and coastal engineering studies. For the implementation of the methodology hourly wave and wind data were obtained from a buoy located in Lake Ontario. Numerical and graphical comparisons demonstrated that the proposed method outperforms the classical formulation.     

Separation of Waves by Interpolation Method

1 .ＩｎｔｒｏｄｕｃｔｉｏｎＴｏｍｅａｓｕｒｅｔｈｅｒｅｆｌｅｃｔｉｏｎｏｆｉｎｃｉｄｅｎｔｗａｖｅｓｐｒｏｄｕｃｅｄｂｙａｐｈｙｓｉｃａｌｍｏｄｅｌｉｎａｗａｖｅｆｌｕｍｅｉｓａｃｏｍｍｏｎｐｒｏｂｌｅｍｗｉｔｈｐｈｙｓｉｃａｌｔｅｓｔｓｏｆｗａｖｅａｃｔｉｏｎｏｎｃｏａｓｔａｌｓｔｒｕｃｔｕｒｅｓ .Ｗａｖｅｓｇｅｎｅｒａｔｅｄｂｙｔｈｅｗａｖｅ ｍａｋｅｒｐｒｏｐａｇａｔｅｆｏｒｗａｒｄｉｎｔｈｅｗａｖｅｆｌｕｍｅａｎｄａｒｅｒｅｆｌｅｃｔｅｄｂｙｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌ,ａｎｄｔｈｅ…     

珠江河口西南风强迫下潮流场的数值模拟

采用Backhaus三维斜压模型模拟了均匀西南风场对珠江口近岸海域的影响，并与无风情况作了对比；通过对珠江河口盐度场及风生环流的分析比较，结果表明，模型较为真实地再现了夏季珠江河口的水动力学特性。