Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

Analytical investigations on loop-manoeuvre of underwater towed cable-array system

The paper reports on analytical case studies on the loop manoeuvre of an underwater towed cable-array system to give an insight into the tactical aspects of their naval applications. The analytical formulation and the solution procedure adopted for this three dimensional dynamic problem is also described. The case studies have been carried out for different loop radii, tow lengths, tow speeds and truncated loops. The resulting X,Y,Z co-ordinates of the towed cable-array and tow-point tensions have been computed. Based on these results, the tow-length to loop radii ratio, leading to cable-array system looping, has been found. The values of speed reduction and turning radius, causing dangerous relaxation in tow-point tension have been worked out. After exit from the loop, the timing required for realignment of the cable-array system with the ship's heading can be obtained from plots of the results. These timings help to plan ship manoeuvres to optimise reestablishment of stable listening conditions during underwater surveillance.     

青岛胶州湾3.2级地震构造背景与控震断裂

本文应用构造分析的方法 ,对青岛胶州湾 3.2级地震发生的地震地质背景和构造背景进行分析。结果表明 :胶州湾 3.2级地震主要受 NEE向郝官庄断裂和 NNW向大沽河断裂控制 ,并根据现代活动断裂的标志 ,对上述 2组断裂活动性特征作了阐述     

煤炭资源勘查误差理论研究

对煤炭资源勘查资源量与客观物质量之间差值的误差理论探讨,提出误差由真值误差、系统误差和离差3个基本部分组成,其中真值误差是不可消除的观测误差、系统误差是控制网度所决定的准确度标准、而离差是由地质构造及矿床形态的多解性产生的资源量波动。在此基础上,构筑了一个关于误差的数学模型,最后应用误差理论对现行勘查工作中常见的错误进行分析,并就如何避免错误及减少误差提出了见解。     

邢东矿井构造特征及应力应变场分析

邢东矿井位于太行山隆起带与华北沉陷带的过渡带,通过区域构造应力-应变场分析,本区先后经历了由挤压-拉张的变形过程,变形强度由弱到强。海西期构造应力影响较弱,印支期-中燕山期构造应力作用较为强烈,形成了大量的挤压结构面和压缩构造．燕山晚期-喜山期是构造形成的最终阶段,以拉张伸展变形为主,现今的多数正断层的断裂结构面仍保存有先期的挤压结构面特征。区内构造以断裂构造为主要形式,断层组合形式多样,这些构造形成期次不同,北西向断裂对北东向断裂具有限制作用。     

New paleomagnetic results from the Aegean extensional province

Various Oligocene formations from NE Greece (ignimbrites from the Medousa area, rhyolites from Zagradenia, granodiorites from Elatia) show discordant paleomagnetic signatures, in each case indicating small cw (clockwise) rotation and also inclination flattening. Marls from Pithion were partly remagnetized in a present-day field. Samples that contain ancient magnetization components also indicate small cw rotation and inclination flattening. However, the magnetization of andesites from Peplos reflects a considerably larger rotation, likely owing to local tectonics. In the context of previous work in the area, these results are used to propose a subdivision of NE Greece into four structural zones of distinctive rotational behaviour (from east to west): sites in zone 1, east of the Kavala-Xanthi-Komotini fault (KXK), show various cw and ccw (counterclockwise) rotation angles owing to complex kinematics resulting from the interaction of the KXK and the north-Anatolian fault zone. However, zone 2, between the KXK and the Strymon valley, is structurally homogeneous ( 10° cw rotation). The paleomagnetic signature of the Vertiskos massif (zone 3) implies a larger (> 30°) cw rotation, whereas sites in the Vardar basin (zone 4) contain a paleomagnetic signature similar to that of zone 2. This suggests a motion of the Vertiscos massif, a meta-ophiolitic nappe, relative to underlying strata. Indeed, zones 2 and 4 may be parts of the same structural unit which underlies this nappe.     

Comparison of structural and least-squares lines for estimating geologic relations

Two different goals in fitting straight lines to data are to estimate a true linear relation (physical law) and to predict values of the dependent variable with the smallest possible error. Regarding the first goal, a Monte Carlo study indicated that the structural-analysis (SA) method of fitting straight lines to data is superior to the ordinary least-squares (OLS) method for estimating true straight-line relations. Number of data points, slope and intercept of the true relation, and variances of the errors associated with the independent (X) and dependent (Y) variables influence the degree of agreement. For example, differences between the two line-fitting methods decrease as error in X becomes small relative to error in Y. Regarding the second goal—predicting the dependent variable—OLS is better than SA. Again, the difference diminishes as X takes on less error relative to Y. With respect to estimation of slope and intercept and prediction of Y, agreement between Monte Carlo results and large-sample theory was very good for sample sizes of 100, and fair to good for sample sizes of 20. The procedures and error measures are illustrated with two geologic examples.     

Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.     

Spontaneous Structural Reform in Australian Local Government: the case of the Gilgandra Co-operative Model in New South Wales

Dire financial constraints and the threats of forced structural reform have had the unforeseen effect of forcing municipal councils across Australia to reconsider their operational activities and organisational arrangements. With considerable ingenuity, numerous municipalities have proposed and sometimes adopted new structural formations that embody various forms of co-operative service provision. This remarkable development has unfortunately been largely ignored in the scholarly literature on Australian local government. In a modest effort aimed at remedying this neglect, the present paper seeks to outline the small, rural New South Wales Gilgandra Shire Council's (2004) ‘Co-operative/Local Government Service Company’ model, place it in the broader context of alternative models of local governance suitable for Australian conditions, and evaluate its characteristics.