The Bear Brook Watershed in Maine: Multi-decadal whole-watershed experimental acidification

The Bear Brook Watershed in Maine (BBWM) is a long-term research site established to study the response of forest ecosystem function to environmental disturbances of chronic acidic deposition and ecosystem nitrogen enrichment. Starting in 1989, the West Bear (treated) watershed received bimonthly applications of ammonium sulfate [(NH₄)₂SO₄] fertilizer from above the canopy, whereas East Bear (reference) received ambient deposition. The treatments were stopped in 2016, marking the beginning of the recovery phase. Research at the site has focused on soils, streams, and vegetation. Here, we describe data collected over three decades at the BBWM—input and stream output nutrient fluxes, quantitative soil pits and soil chemistry, and soil temperature and moisture.     

Modelling the effect of changing precipitation inputs on deep soil water utilization

Forests in the Southeastern United States are predicted to experience future changes in seasonal patterns of precipitation inputs as well as more variable precipitation events. These climate change‐induced alterations could increase drought and lower soil water availability. Drought could alter rooting patterns and increase the importance of deep roots that access subsurface water resources. To address plant response to drought in both deep rooting and soil water utilization as well as soil drainage, we utilize a throughfall reduction experiment in a loblolly pine plantation of the Southeastern United States to calibrate and validate a hydrological model. The model was accurately calibrated against field measured soil moisture data under ambient rainfall and validated using 30% throughfall reduction data. Using this model, we then tested these scenarios: (a) evenly reduced precipitation; (b) less precipitation in summer, more in winter; (c) same total amount of precipitation with less frequent but heavier storms; and (d) shallower rooting depth under the above 3 scenarios. When less precipitation was received, drainage decreased proportionally much faster than evapotranspiration implying plants will acquire water first to the detriment of drainage. When precipitation was reduced by more than 30%, plants relied on stored soil water to satisfy evapotranspiration suggesting 30% may be a threshold that if sustained over the long term would deplete plant available soil water. Under the third scenario, evapotranspiration and drainage decreased, whereas surface run‐off increased. Changes in root biomass measured before and 4 years after the throughfall reduction experiment were not detected among treatments. Model simulations, however, indicated gains in evapotranspiration with deeper roots under evenly reduced precipitation and seasonal precipitation redistribution scenarios but not when precipitation frequency was adjusted. Deep soil and deep rooting can provide an important buffer capacity when precipitation alone cannot satisfy the evapotranspirational demand of forests. How this buffering capacity will persist in the face of changing precipitation inputs, however, will depend less on seasonal redistribution than on the magnitude of reductions and changes in rainfall frequency.     

Variations in glacier volume and snow cover and their impact on lake storage in the Paiku Co Basin,in the Central Himalayas

Glaciers and snow cover are important constituents of the surface of the Tibetan Plateau. The responses of these phenomena to global environmental changes are sensitive, rapid and intensive due to the high altitudes and arid cold climate of the Tibetan Plateau. Based on multisource remote sensing data, including Landsat images, MOD10A2 snow product, ICESat, Cryosat-2 altimetry data and long-term ground climate observations, we analysed the dynamic changes of glaciers, snow melting and lake in the Paiku Co basin using extraction methods for glaciers and lake, the degree-day model and the ice and lake volume method. The interaction among the climate, ice-snow and the hydrological elements in Paiku Co is revealed. From 2000 to 2018, the basin tended to be drier, and rainfall decreased at a rate of −3.07 mm/a. The seasonal temperature difference in the basin increased, the maximum temperature increased at a rate of 0.02°C/a and the minimum temperature decreased at a rate of −0.06°C/a, which accelerated the melting from glaciers and snow at rates of 0.55 × 10⁷ m³/a and 0.29 × 10⁷ m³/a, respectively. The rate of contribution to the lake from rainfall, snow and glacier melted water was 55.6, 27.7 and 16.7%, respectively. In the past 18 years, the warmer and drier climate has caused the lake to shrink. The water level of the lake continued to decline at a rate of −0.02 m/a, and the lake water volume decreased by 4.85 × 10⁸ m³ at a rate of −0.27 × 10⁸ m³/a from 2000 to 2018. This evaluation is important for understanding how the snow and ice melting in the central Himalayas affect the regional water cycle.     

Evaluating soil water routing approaches in watershed-scale,ecohydrologic modelling

Soil water dynamics are central in linking and regulating natural cycles in ecohydrology, however, mathematical representation of soil water processes in models is challenging given the complexity of these interactions. To assess the impacts of soil water simulation approaches on various model outputs, the Soil and Water Assessment Tool was modified to accommodate an alternative soil water percolation method and tested at two geographically and climatically distinct, instrumented watersheds in the United States. Soil water was evaluated at the site scale via measured observations, and hydrologic and biophysical outputs were analysed at the watershed scale. Results demonstrated an improved Kling–Gupta Efficiency of up to 0.3 and a reduction in percent bias from 5 to 25% at the site scale, when soil water percolation was changed from a threshold, bucket-based approach to an alternative approach based on variable hydraulic conductivity. The primary difference between the approaches was attributed to the ability to simulate soil water content above field capacity for successive days; however, regardless of the approach, a lack of site-specific characterization of soil properties by the soils database at the site scale was found to severely limit the analysis. Differences in approach led to a regime shift in percolation from a few, high magnitude events to frequent, low magnitude events. At the watershed scale, the variable hydraulic conductivity-based approach reduced average annual percolation by 20–50 mm, directly impacting the water balance and subsequently biophysical predictions. For instance, annual denitrification increased by 14–24 kg/ha for the new approach. Overall, the study demonstrates the need for continued efforts to enhance soil water model representation for improving biophysical process simulations.     

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

黑龙江哈尔滨白渔泡国家湿地公园沼泽、林地和农田土壤物理、化学和生物性质差异

为了揭示黑龙江哈尔滨白渔泡国家湿地公园沼泽、林地和农田土壤物理、化学和生物性质的差异,于2018年7月25日~8月2日,在湿地公园内,在天然芦苇(Phragmites australis)沼泽、林地、旱田和水田中设置采样地,采集不同深度(0~10 cm、10~20 cm和20~30 cm)的土壤样品,测定土壤样品的物理、化学和生物指标。研究结果表明,白渔泡国家湿地公园不同采样地土壤指标存在差异;与天然芦苇沼泽土壤相比,其它采样地土壤的含水量明显偏低,土壤全氮、全磷、碱解氮和有机质含量都明显偏小,水田土壤速效磷含量偏大;天然芦苇沼泽土壤脲酶、硝酸还原酶、纤维素酶、蛋白酶和β-葡萄糖苷酶活性都高于林地和农田土壤,水田0~10 cm和10~20 cm深度土壤的硝酸还原酶活性显著高于旱田和林地;与天然芦苇沼泽土壤相比,旱田土壤小于0.25 mm的小团聚体含量偏大,而其它采样地土壤的各粒级团聚体的比例变化较小,水田土壤团聚体平均重量直径比天然芦苇沼泽和旱田土壤低。     

河外H2O超脉泽源及与其相关的分子谱线的观测和研究

自从在活动星系核NGC4945的视线方向上发现第一个河外H2O超脉泽源以来，迄今为止已发现了19个河外H2O超脉泽源，对与活动星系核成协和河外H2O超脉泽源及分子谱线的观测和研究是探测和研究活动星系核核区中央源，拱核气体和尘埃环性质的非常有效的工具，主要评述对河外H2O超脉泽源及与其相关分子谱线的搜索，观测和理论研究现状。     

ECOLOGICAL SERIES OF SOIL ANIMALS IN DARLIDAI MOUNTAIN

The ecological series of soil animals under the broad-leaved and pine mixed forest in Darlidai Mountainwas studied. Seven sample plots were selected according to different altitude gradients, which belong to different vegeta-tion types. By investigating and analyzing soil animals in every sample plot it is found that there are 45 groups and 1956individuals, which axe involved in 3 phylums, 7 classes, 16 orders, respectively. The altitude is a key factor which af-fects ecological series of soil animals. Both the groups and individuals of soil animals increase with altitude increasingunder certain conditions, which contrastes with ordinary cases, resulting from special micro-climate in studied area. Thegroups and individuls of soil animals are the most under the broad-leaved and pine forest on the top of the mountain, andthe least under Picea-Abies forest in the foot of the mountain.     

粤东海涂土壤及其利用

粤东海岸东起闽粤交界的大埕湾,西迄深圳市的大鹏湾,岸线曲折,港湾较多,河溪人海泥沙在潮间带及紧邻5m 等深线以内形成大片海涂,土壤类型多样,以泥质和沙泥质土壤为主;除河口湾的土壤含盐量低外,其余较高;土壤有机质含量中等,钾素较丰富,磷素较低。因地处亚热带南缘,光、热和水资源条件较好,且多数海湾有深入内地的小海湾和潮沟,甚适合发展海水养殖与晒盐,韩江口的义丰河和海门龟头海大闸外等滩地尚有围垦价值。多处海湾潮滩沙土适合作海滨浴场,也有小片滩地红树林适合旅游观赏。