Ductile deformation of garnet in mylonitic gneisses from the Münchberg Massif (Germany)

Mylonitic gneisses from the Münchberg Massif contain single grains (type I) and polycrystalline aggregates (type II) of garnet displaying a distinct elongation parallel to a macroscopic lineation which is interpreted as the result of ductile deformation. Lattice-preferred orientations of quartz (textures) symmetrical to the macroscopic foliation and lineation and the lack of rotational microfabrics indicate that the bulk deformation was pure shear at least during the latest strain increments. Garnet textures measured by EBSD together with microprobe analyses demonstrate that these two structural types of garnet can be related to two different processes of ductile deformation: (1) For the single grains stretching can be attributed to diffusion creep along grain boundary zones (Coble creep). The related mass transfer is indicated by the fact that primary growth zones are cut off at the long faces of the grains while the related strain shadow domains do not show comparable chemical zoning. Pressure solution and precipitation suitable to produce similar structures can be largely ruled out because retrogressive reactions pointing to the presence of free hydrous fluids are missing. (2) For the polycrystalline garnet aggregates consisting of cores grading into fine-grained mantles, dislocation creep and associated rotation recrystallization can be assumed. Continuous lattice rotation from the core to the outer polycrystalline rim allow a determination of the related dominant slip systems which are {100}<010> and equivalent systems according to the cubic lattice symmetry. The same holds for garnets which appear to be completely recrystallized. For this type of fine-grained aggregates an alternative nucleation model is discussed. Due to penetrative dislocation glide in connection with short range diffusion and the resulting lattice rotation, primary growth zones are strongly disturbed.Since for the considered rock unit of the Münchberg Massif peak metamorphic temperatures between 630 and 670 °C can be assumed, this study clearly demonstrates that the inferred processes of ductile garnet deformation can occur not only in HT regimes as often suggested in the literature even if embedded within a matrix of “low-strength” minerals like quartz, feldspars and micas.     

A scanning electron microscope study of the effects of dynamic recrystallization on lattice preferred orientation in olivine

Effects of dynamic recrystallization on lattice preferred orientation (LPO) in olivine were investigated through the combination of two SEM-based techniques, electron backscattered diffraction (EBSD) technique for crystallographic orientation measurement and backscattered electron imaging (BEI) for dislocation observation. Samples are experimentally deformed olivine aggregates in simple shear geometry. In the sample deformed at T=1473 K and high stresses (480 MPa), only incipient dynamic recrystallization is observed along grain-boundaries. Orientations of these small recrystallized grains are more random than that of relict grains, suggesting an important role of grain-boundary sliding at this stage of recrystallization. In the sample deformed at T=1573 K and low stress (160 MPa), dynamic recrystallization is nearly complete and the LPO is characterized by two [100] peaks. One peak is located at the orientation subparallel to the shear direction and is dominated by grains with high Schmid factor. The other occurs at high angles to the shear direction and is due to the contribution from grains with low Schmid factor. Grains with high Schmid factor tend to have higher dislocation densities than those with low Schmid factor. Based on these observations, we identify two mechanisms by which dynamic recrystallization affects LPO: (1) enhancement of grain-boundary sliding due to grain-size reduction, leading to the modification of LPO caused by the relaxation of constraint for deformation; (2) grain-boundary migration by which grains with lower dislocation densities grow at the expense of grains with higher dislocation densities. Based on the deformation mechanism maps and stress versus recrystallized grain-size relation, we suggest that the first mechanism always plays an important role whereas the second mechanism has an important effect only under limited conditions.     

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.     

湖北黄土岭麻粒岩锆石拉曼光谱和等离子体质谱研究

对湖北黄土岭麻粒岩中锆石同时进行了激光拉曼探针、阴极发光 (CL)观察和U ,Th及Pb Pb年龄ICPMS测定 ,发现麻粒岩中部分锆石发生的不是固态重结晶作用 ,而是部分熔蚀 /沉淀再结晶过程。结合CL图像结构特征和2 0 7Pb/ 2 0 6Pb年龄初步推断 ,麻粒岩相事件发生在 2 0亿年之后。结构、化学和同位素组成的测定表明 ,大别地区广泛存在的燕山期热事件使锆石发生不同程度的变质重结晶作用 ,使锆石晶格愈合。     

The migration of fluid-filled grain boundaries in recrystallizing synthetic bischofite: first results of in-situ high-pressure, high-temperature deformation experiments in transmitted light

The effect of fluids on recrystallization behaviour is well known; however, the detailed microscale distribution of fluid in grain boundaries and the influence of fluid on grain boundary migration are still unresolved. In this study, in‐situ deformation experiments in transmitted light microscopy were undertaken, as this allows continuous and direct observation of the whole range of processes involved in fluid‐assisted grain boundary migration. A new see‐through deformation apparatus was developed to enable the control of fluid pressure. Bischofite containing small amounts of aqueous fluid was deformed at temperatures between 50 and 90 °C, over a range of fluid pressure from 0.5 to 1 MPa, and strain rates of 5 × 10^?6 to 1 × 10^?4 s^?1. The rates of grain boundary migration were measured at different temperatures and strain rates. Detailed observations during and after the deformation illustrate the evolution of migrating fluid‐filled grain boundaries and show that the incorporation of fluids from inclusions as well as their pinch‐off is dependent on the grain boundary velocity, the thickness of the grain boundary and the size and shape of the inclusions. Direct evidence is presented for the contraction of the grain boundary fluids into isolated inclusions after equilibrium conditions are attained.     

Plastic Deformation and Recrystallization of Garnet: A Mechanism to Facilitate Diffusion Creep

Elongate and deformed garnets from Glenelg, NW Scotland, occurwithin a thin shear zone transecting an eclogite body that hasundergone partial retrogression to amphibolite facies at circa700°C. Optical microscopy, back-scattered electron imaging,electron probe microanalysis and electron back-scatter diffractionreveal garnet sub-structures that are developed as a functionof strain. Subgrains with low-angle misorientation boundariesoccur at low strain and garnet orientations are dispersed, aroundrational crystallographic axes, across these boundaries. Towardshigh-strain areas, boundary misorientations increase and thereis a loss of crystallographic control on misorientations, whichtend towards random. In high-strain areas, a polygonal garnetmicrostructure is developed. The garnet orientations are randomlydispersed around the original single-crystal orientation. Somegarnet grains are elongate and Ca-rich garnet occurs on thefaces of elongate grains oriented normal to the foliation. Commonly,the garnet grains are admixed with matrix minerals, and, wherein contact with other phases, garnet is well faceted. We suggestthat individual garnet porphyroclasts record an evolution fromlow-strain conditions, where dislocation creep and recoveryaccommodated deformation, through increasing strain, where dynamicrecrystallization occurred by subgrain rotation, to higheststrains, where recrystallized grains were able to deform bydiffusion creep assisted grain boundary sliding with associatedrotations. KEY WORDS: diffusion creep; EBSD; garnet; plastic deformation; recrystallization     

几种花青染料的合成及分离

研究了Ｎ甲基对二甲胺基苯乙烯吡啶碘盐系列化合物的合成、分离方法,通过可见吸收、ＭＳ谱、ＨＮＭＲ 谱及氮素测定分析产物,证实了其结构和理论预期的一致性     

人造金刚石合成片中再结晶物质的空间分布

通过电子显微镜观察，发现金刚石合成片断面的再结晶物质具有分带现象，金刚石晶体出现于再结晶片－板状石墨亚带和枝状石墨亚带中，这一发现有助于深入探讨金刚石的生长条件和形成机理。     

大别地区不同类型岩石的超高压结晶实验及其岩石学意义

在３．５ＧＰａ、１２００℃条件下对取自大别地区的不同类型岩石进行了重结晶实验，并采用偏光显微镜、Ｘ射线粉晶衍射和电子探针对实验产物的结晶特点、矿物组成及矿物成分进行了研究。结果表明：①石榴橄缆岩的岩石成因与共生的榴辉岩相同；②榴辉岩的重结晶经历了从单斜辉石岩、石榴辉石岩到榴辉岩的过程；③超高压片麻岩主要由石榴子石、绿辉石、多硅白云母和柯石英组成，不含斜长石、黑云母和绿帘石等常规矿物；④柯石英和文石     

Recrystallization of Magnesian Calcite Overgrowths on Calcite SeedsSuspended in Seawater

The formation and subsequent reactions of magnesiancalcite overgrowths on calcite were investigated bymeans of closed system seeded precipitationexperiments. These experiments demonstrated that(1) thin overgrowths of magnesian calcite are precipitatedon calcite seeds suspended in seawater;(2) the solubilities of the coatings increase outward from theseed crystals as a linear function of the log ofrelative coating thickness;(3) during the period ofthese experiments (up to 5.5 months), the magnesiancalcite coatings continued to increase in thickness,but became less soluble in composition. Thestabilization reaction, referred to asrecrystallization, can be described by the followingequation:Cax Mg(1-x) CO3 + [z + y(x + z)]Ca2++ 2yHCO3- ]= (1 + y)Ca(x + z)Mg(1 - x -z)CO3 + [z + y(x + z - 1)]Mg2++ y CO2 + yH20;]4) recrystallization rate is dependent on solutionsaturation state, with a reaction order of 3.2 forartificial seawater and 4.0 for natural seawater; and(5) by the cessation of the closed system experiments,overgrowth compositions approached that of the stablecalcite (a few mol % MgCO3).Armoring of suspended carbonate particles in thesurface oceans with magnesian calcite overgrowthswould provide an effective barrier to release of theoceanic supersaturation with respect to calcite. Thicknesses of such coatings would be limited by therecrystallization rate of the magnesian calcite. Estimates based on the recrystallization ratesdetermined in this work indicate coatings on the orderof 0.02 µm in thickness could form on particles asthey sink through the mixed layer. According to thesecalculations, the total amount of carbon precipitatedannually in magnesian calcite overgrowths iscomparable to the riverine flux of dissolved carbon tothe oceans. Field observations of severalinvestigators indicate the likely presence ofmagnesian calcite coatings on planktonic particles,and provide evidence for possible recrystallization ofbiogenic magnesian particles in the marineenvironment.