冰碛扇型砂金矿床特征及其成矿初探

成生于冰碛扇内，经一定的生物、物理、化学成矿作用，以砂金形态分布而富集成矿的金矿称为冰碛扇型砂金矿床。它具有沿造山带一定标高范围成群、成带分布，沉积物为近源且半胶结，砂金呈面状分布，并以粒金、块金为主，具胶状、浑圆状、包块状构造形态，分布极不均匀等特征。冰碛扇型砂金矿床的成矿作用与河成砂金矿床有本质的区别。它的成矿作用模式是：造山带下地壳富含的活化金通过新构造运动活化的断裂运移地表，经地下流体和地表流体的迁移聚集到冰碛扇这一封闭稳定的生物、物理、化学障环境中，主要经高效聚金微生物有机胶体成矿作用沉淀、再生加大形成砂金，逐步富集成矿床。而红色磨拉石建造中风化离解的Ｆｅ，Ｍｎ物质对沉淀环境ｐＨ值起着一定的调节作用。冰碛扇型砂金矿床在我国西部造山带内广泛分布，具有一定的工业价值，是砂金矿床中一重要类型，应予以重视     

上扬子地台震旦系铅锌矿床类型及找矿方向

上扬子地台含铅锌矿地层主要为震旦系。震旦系在上扬子地台主要发育上统灯影组,次有下统陡山沱组。将上扬子地台震旦系铅锌矿床成因划分为一级为叠生矿床,二级为层控矿床,三级为热水沉积改造矿床和热水沉积再造矿床四级类型,该类型按铅锌比例进一步划分为富铅型、富锌型、铅锌共生型。研究区内最重要的铅锌矿床成因类型为南郑马元、会东大梁子铅锌矿为代表的富锌型。陕西南郑、紫阳—镇坪地区,湖北武当、神农架、黄陵地区,以及地台西缘的安宁河、甘洛—小江、峨边—寻甸等地区的震旦系是寻找铅锌矿的最有利地段。     

矿物的导电类型与矿物形成温度的关系

通过杂质对导电类型的影响的研究,得出了同种矿物的不同导电类型与矿物形成温度的规律:电子型(n型)导电矿物的形成温度大于电子与空穴混合型导电矿物的形成温度,又大于空穴型(p型)导电矿物的形成温度,绝缘体矿物的形成温度低于上述三种导电类型矿物。应用矿物热电图谱仪,天然金刚石半导体测试仪对闪锌矿、黄铁矿、金刚石等矿物的导电类型进行了测试,并探讨了导电类型成因,证实了上述规律的正确性。     

Studies on color type variants from mutagenized protoplasts ofPorphyra haitanensis Chang et Zheng &P. Yezoensis ueda (rhodophycease)

Isolated protoplasts from thalli ofPorphyra haitanensis andPorphyra yezoensis were treated with colchicine or irradiated by ultraviolet (UV). Several types of color variants were observed among the protoplast offspring. After treatment with colchicine: (1) 0.04–0.09% of red type variants inP. haitanensis were obtained; (2) The rate of red type variants and the variegated chimeral thalli composed of red type and wild type of sectors were 0.31–1.11% inP. yezoensis. After irradiation with UV: (1) 3.5–10.5% of red type variants inP. yezoensis were obtained: (2) 0.5–2.0% of red type variants and the variegated chimeral thalli composed of red type and wild type of sectors were obtained inP. haitanensis. Colchicine and UV’s mutangenic effects onP. yezoensis protoplasts were stronger than those onP. haitanensis protoplasts. The most efficient concentration of colchicine was 0.05%. The optimal length of UV-radiation was 1/2 min (radiation distance 5 cm). The red type variants induced by colchicine treatment grew faster than the wild type thalli. The clones of vegetative propagation from protoplasts of red type variants were still red type thalli. The red type variants will be good materials for genetic studies and improvement ofPorphyra strains.     

CHARACTERIZATION OF LACTATE DEHYDROGENASE ISOZYME PATTERN AND MORPHOLOGY OF THREE MARINE FISH CELL LINES

Three continuous marine fish cell lines of FG (i. e., Hounder Gill) from flounder (Paralichthys olivaceus) gill, SPH (i. e. , Sea Perch Heart) from sea perch (Lateolabrax japonicus) heart and RSBF (i.e., Red Sea Bream Fin) from red sea bream (Pagrosomus major) fin, were characterized by lactate dehydrogenase (LDH) isozyme and morphological analysis. The LDH isozyme patterns of these three cell lines and their corresponding tissues of origin were investigated and compared. The results showed: (1) No difference was found in the LDH isozyme patterns of FG and flounder gill tissue. However, the LDH isozyme patterns of SPH and RSBF were significantly different from their corresponding tissues of origin; (2) LDH isozyme patterns of FG, SPH and RSBF were markedly different from each other and could serve as genetic markers for species identification and detection of cross contamination. Morphological change analysis of these three cell lines in comparison to their original tissues indicated that FG cells still appeared epithelioid without morphological transformation. However, morphological changes were found in SPH and RSBF compared to their original tissues. Therefore, the cellular morphology was still plastic in the relatively stable culture conditions, and it was possible that change of LDH patterns wasrelated to morphological changes of fish cells in vitro.     

桂西古侵蚀沉积间断面型金矿床(续载)

古侵蚀沉积间断面型金矿是桂西的主要金矿床类型。文章着重分析该类型金矿成矿地质条件 ,论述矿床成因及成矿机理 ,认为此类型金矿易采易冶 ,经济效益显著 ,建议加大开发力度。     

Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.     

河南洛宁段河金矿流体包裹体研究和矿床成因

河南省洛宁县段河石英脉型金矿主要包括石寨沟和岭东两个矿区,分别由3～4条含金石英脉构成。矿化过程从早到晚包括石英-黄铁矿、石英-多金属硫化物和石英-碳酸盐等3个阶段．其中中阶段金矿化最强,次为早阶段。各阶段石英中流体包裹体以气液两相包裹体为主．次为纯液体包裹体。激光拉曼测试表明,气液两相包裹体的液相为H2O,气相主要为Ho和CO2混合、纯H2O,次为纯CO2;纯液体包裹体为纯H2O。石寨沟矿区包裹体均一温度从早到晚依次为240．9～315．9℃．188．7～304．5℃,137．3～259．3℃：流体盐度变化依次为（6．74～12．85）wt%NaCl．eq,（2．41～8．68）wt％NaCl．eq,（2．24-7．86）wt%NaCl．eq。岭东矿区均一温度从早到晚依次为303．7-343．1℃,251．8-325．4℃,305．7～355．0℃：流体盐度变化依次为（5．11～11．70）wt％NaCl．eq,（2．74-10．11）wt％NaCl．eq,（0．53-6．74）wt％NaCl．eq。两矿区主成矿期流体均为中温、低盐度,早阶段流体为改造热液和变质热液的混合体,含一定量CO2,且流体CO2含量和盐度从早到晚逐渐降低。石寨沟矿区包裹体均一温度逐渐降低,而岭东矿区包裹体均一温度先降后升,加之岭东矿区各阶段成矿温度均高于石寨沟矿区．表明成矿流体系统主要受岩浆热驱动,岭东矿区更靠近岩体,且在晚阶段又有脉动性的岩浆加热．段河金矿区南部存在隐伏岩体。     

P-III分布参数的概率权重矩法S函数计算

概率权重矩法是一种估计统计分布参数的方法.本文根据不完全Γ函数在无限区间积分,推导了P-Ⅲ分布参数的S函数的计算公式.通过现有计算公式比较,其计算结果具有较高的计算精度,避免了的大量的数值积分计算.文中公式只要借助于计算编程进行求解,给定超几何函数项一定的截断误差,其运算具有较高的运行速度.文中计算公式是一种P-Ⅲ分布参数S函数的计算途径.