The Fault Block''s Framework in Boli Basin and its Control Over the Deposition

Boli basin, between Yishu fracture belt and Dunmi fracture belt, is the biggest Mesozoic coal basin in the east of Heilongjiang Province. Now it is a fault - fold remnant basin. The basin' s shape is generally consistent with the whole distribution of the cover folds, an arc protruding southwards. The basement of the basin can be divided into three fault blocks or structural units. The formation and evoluation of the basin in Mesozoic was determined by the basement fault blocks' displacement features rusulted from by the movement of the edge faults and the main basement faults.     

Field observations of waves generated by passing ships: A note

This short contribution reports the results of a field study on the nearshore characteristics of waves generated by both conventional and high speed passenger ferries. The field observations took place in the late summer of 2005, at a beach close to the port of Mytilene (Island of Lesbos, Greece), and involved the visual observation of ship waves, using digital video recordings and image processing techniques. The results showed that passage of the fast ferry was associated with a longer, more complex and energetic nearshore event; this event not only did include higher nearshore waves (up to 0.74 m) and was organised in different wave packets, but it was also an order of magnitude longer (∼ 680 s) than the conventional ferry event. Regarding the effects on beach sediment dynamics, the fast ferry waves were estimated to be very efficient in mobilising the nearshore sediments in contrast to those of the conventional ferry. The fast ferry service appears to generate daily prolonged nearshore events, which contain waves with higher energy than those expected from the normal summer wind wave regime of the area; these events also include some high and very steep waves, which can be particularly erosive. Therefore, fast ferry wakes may have considerable impacts on the seasonal beach sediment dynamics/morphodynamics and the nearshore benthic ecology, as well as they may pose significant risks to bathers, affecting the recreational use of the beaches exposed to fast ferry traffic. Finally, the study has shown that satisfactory field observations of the nearshore characteristics of ship-generated (and wind) waves can be obtained using inshore deployments of calibrated poles, digital video cameras and appropriate image processing algorithms.     

珠江口悬浮颗粒物质的电泳性质

研究了溶液ｐＨ值、离子强度、氨基酸和微量金属元素对珠江口悬浮物电泳淌度的影响。结果表明：随着溶液ｐＨ值的升高，电泳淌度（负值）的绝对值开始逐渐增大，至ｐＨ值为８左右开始下降；随着离子强度的增大，电泳淌度的绝对值也相应增大，至１０－２时趋向平稳；氨基酸对电泳淌度无影响；而微量金属元素（Ｆｅ）对电泳淌度的影响取决于该元素的含量。     

“数字海底”系统建模中的关键技术研究

基于“数字海底”系统的理论基础研究和在海底科学应用中的具体实践,提出了“数字海底”的涵义、系统组成和体系结构,对空间数据管理技术、基于XML的WebGIS空间数据表达技术、复杂海底三维建模技术、多源信息的一体化集成显示技术、虚拟现实技术等“数字海底”系统建模中的关键技术进行了探讨,为从事海底资源研究和开发的人员提供各个层次的参考或帮助.     

Documenting hurricane impacts on coral reefs using two-dimensional video-mosaic technology

Four hurricanes impacted the reefs of Florida in 2005. In this study, we evaluate the combined impacts of hurricanes Dennis, Katrina, Rita, and Wilma on a population of Acropora palmata using a newly developed video‐mosaic methodology that provides a high‐resolution, spatially accurate landscape view of the reef benthos. Storm damage to A. palmata was surprisingly limited; only 2 out of 19 colonies were removed from the study plot at Molasses Reef. The net tissue losses for those colonies that remained were only 10% and mean diameter of colonies decreased slightly from 88.4 to 79.6 cm. In contrast, the damage to the reef framework was more severe, and a large section (6 m in diameter) was dislodged, overturned, and transported to the bottom of the reef spur. The data presented here show that two‐dimensional video‐mosaic technology is well‐suited to assess the impacts of physical disturbance on coral reefs and can be used to complement existing survey methodologies.     

自动化监测技术在我国首条大型电力隧道中的应用

通过自动化监测在超大工程项目中的应用,利用现有技术手段,对工程进行有效管理,逐渐将对工程的安全、预判起到越来越重要的作用,它可以在为工程节约大量资金情况下,提高预判安全施工的能力,是提高工程管理的重要手段。     

Evaluating the mobility of137Cs,239+240Pu and210Pb from their distributions in laminated lake sediments

Post-depositional mobility of¹³⁷Cs,^239+240Pu and²¹⁰Pb was assessed in six small lake basins by comparing sedimentary nuclide profiles with their known fallout history. Laminae couplets, when present, were determined to be varves because the¹³⁷Cs and^239+240Pu 1963 fallout peaks are present in laminae couplets corresponding to years 1962–1964. There is no evidence of mobility of²¹⁰Pb, because 1) mass accumulation rates based on²¹⁰Pb agree with those based on¹³⁷Cs and^239+240Pu peak depths and with those based on varve counts, and 2)²¹⁰Pb ages agree with varve ages. Significant mobility of¹³⁷Cs is evident from the penetration of¹³⁷Cs to depths 15–20 cm deeper than^239+240Pu. Deep penetration of¹³⁷Cs in spite of a sharp gradient below the peak is interpreted by a numerical model to suggest that¹³⁷Cs is present in two distinct forms in these sediments, 67–82% as an immobile form and 18–33% reversibly adsorbed with a K _d of approximately 5000. The profiles can be interpreted equally well assuming a small portionof the total¹³⁷Cs was present as an extremely mobile phase (K _d 5000) in the months to years following peak fallout, slowly becoming more strongly adsorbed. High NH ₄ ⁺ concentrations in porewaters may enhance diffusion of the mobile form of¹³⁷Cs, but not of the immobile form of¹³⁷Cs that defines the sharp gradient. Mobility of¹³⁷Cs is likely also enhanced by the low clay content and the high porosity of these sediments. Thus the first detection of¹³⁷Cs in the sediments cannot automatically be assumed to correspond to a date of 1952 (initial testing of thermonuclear weapons), although the depth of the peak can be assumed to correspond to 1963 (the year of maximum fallout from testing of thermonuclear weapons).^239+240Pu is a more reliable sediment chronometer than¹³⁷Cs because it is significantly less mobile.This is the sixth of a series of papers to be published by this journal following the 20 ^th anniversary of the first application of²¹⁰Pb dating of lake sediments. Dr P.G. Appleby is guest editing this series.     

Remediation and restoration of metal-contaminated sites： Concepts and appfications to mining areas

Metals, including heavy metals and metalloids, are a common group of environmental contaminants. Their sources in the environment are geogenic or anthropogenic. The growing trend in global industrialization ensures that more metals could be dispersed even in pristine ecosystems. To fuel industrialization, more metal ore mines have to be discovered and explored. These explorations often result in landscape disturbance, soil degradation and environmental contamination by unwanted mining constituents. Mine tailings brought up to the ground surface often serve as the main source of contaminants when these pyrite-rich materials oxidize. The oxidation of mine tailings results in proton generation, coupled with the dissolution of metals and other cations Unwanted anionic constituents are also produced. The so-called ＂acid mine drainage＂ may affect the productivity of farmlands and stability of receiving streams and other bodies of water-acidifying the waters and enriching the ecosystem with metals, i.e., high total dissolved solids. The acidified overburden materials become inhospitable to plant and microbial life as they are typically low in organic matter content and infertile. This exposes the landscape to runoff and erosion.     

Hydrogeochemical controls on surface and groundwater chemistry in naturally acidic, porphyry-related mineralized areas, southern Rocky Mountains

In southern Rocky Mountains, catchments characterized by acidic, metalliferous waters that are relatively unaffected by human activity usually occur within areas that have active or historical mining activity. The US Geological Survey has utilized these mineralized but unmined catchments to constrain geochemical processes that control the surface- and ground-water chemistry associated with near surface acid weathering as well as to estimate premining conditions. Study areas include the upper Animas River watershed, Lake City, Mt. Emmons, and Montezuma in Colorado and Questa in New Mexico. Although host-rock lithologies range from Precambrian gneisses to Cretaceous sedimentary units to Tertiary volcanic complexes, mineralization is Tertiary in age and associated with intermediate to felsic composition, porphyritic plutons. Pyrite is ubiquitous. Variability of metal concentrations in water is caused by two main factors： mineralogy and hydrology. Parameters that potentially affect water chemistry include： host-rock lithology, intensity of hydrothermal alteration, sulfide mineralogy and chemistry, gangue mineralogy, length of flow path, precipitation, evaporation, and redox conditions. Springs and headwater streams have pH values as low as 2.5, sulfate up to 3700 mg/L and high dissolved metal concentrations （for example： Al up to 170 mg/L; Fe up to 250 mg/L; Cu up to 3.5 mg/L and Zn up to 14 mg/L）. With the exception of evaporative waters, the lowest pH values and highest Fe and Al concentrations occur in water draining the most intense hydrothermally altered areas consisting of the mineral assemblage quartz-sericite-pyrite. Stream beds tend to be coated with iron floc, and some reaches are underlain by ferricrete. When iron-rich ground water interacts with oxygenated waters in the stream or hyporheic zone, ferrous iron is oxidized to ferric iron, which is less soluble, leading to the precipitation of iron oxyhydroxides.