Spatial and temporal variability of crustal magnetization of a slowly spreading ridge: Mid-Atlantic Ridge (20°–24° N)

The results of the two- and three-dimensional magnetic inversions performed on data located between 20°–24° N on the Mid-Atlantic Ridge indicate the crustal magnetization has decayed exponentially for the last 10 Ma, and that this decay has been fairly symmetric about the ridge axis. After removal of the mean temporal decay, the residual field is characterized by more positive magnetizations at the second-order discontinuities, regardless of initial magnetization direction. A model that involves the preferential emplacement of serpentinized lithologies near the discontinuities is proposed to explain this correlation. The temporal detrending method also indicates that several ridge-parallel depressions located on the flanks of the ridge axis are regions of more positive magnetizations. These bathymetric depressions may mark the locations of detachment faulting that occurred during amagmatic periods of extension. The general symmetry of the crustal magnetization about the ridge axis does not support the occurrence of continuous detachment faulting proposed to correspond to the inner and outer corners of ridge axis discontinuities.     

A rifted inside corner massif on the Mid-Atlantic Ridge at 5°S

The structure of the Mid-Atlantic Ridge at 5°S was investigated during a recent cruise with the FS Meteor. A major dextral transform fault (hereafter the 5°S FZ) offsets the ridge left-laterally by 80 km. Just south of the transform and to the west of the median valley, the inside corner (IC – the region bounded by the ridge and the active transform) is marked by a major massif, characterized by a corrugated upper surface. Fossil IC massifs can also be identified further to the west. Unusually, a massif almost as high as the IC massif also characterizes the outside corner (OC) south of the inactive fracture zone and to the east of the median valley. This OC massif has axis-parallel dimensions identical to the IC massif and both are bounded on their sides closest to the spreading axis by abrupt, steep slopes. An axial volcanic ridge is well developed in the median valley both south of the IC/OC massifs and in an abandoned rift valley to the east of the OC massif, but is absent along the new ridge-axis segment between the IC and OC massifs. Wide-angle seismic data show that between the massifs, the crust of the median valley thins markedly towards the FZ. These observations are consistent with the formation of the OC massif by the rifting of an IC core complex and the development of a new spreading centre between the IC and OC massifs. The split IC massif presents an opportunity to study the internal structure of the footwall of a detachment fault, from the corrugated fault surface to deeper beneath the fault, without recourse to drilling. Preliminary dredging recovered gabbros from the scarp slope of the rifted IC massif, and serpentinites and gabbros from the intersection of this scarp with the corrugated surface. This is compatible with a concentration of serpentinites along the detachment surface, even where the massif internally is largely plutonic in nature.     

中国东部中新生代盆地成因及其地球动力学

中国东部大兴安岭－太行山－武陵山重力梯度带一线以东至太平洋西岩，大陆连缘中新生代盆地系的形成，中生代岩浆活动，盆地基本特征同Ｍｏｈｏ、岩石圈和软流圈及上地幔基本特征的内在联系等都表明，它们在时空和成因上有一定联系，可以纳入同一地球动力学过程之中，这种动力学机制可能与岩石圈界，地壳底界的拆离作用有关。     

Seismic reflection imaging of an oceanic detachment fault: Atlantis megamullion (Mid-Atlantic Ridge, 30°10′N)

We present multichannel seismic reflection data collected over the Atlantis megamullion, at the eastern ridge-transform intersection of Atlantis fracture zone on the northern Mid-Atlantic Ridge, and over its conjugate crust. These data image for the first time the internal structure of a young, well-developed megamullion dome formed by tectonic extension across a long-lived oceanic detachment fault. The exposed, corrugated detachment-fault surface exhibits a sharp, coherent reflection that contrasts with less organized reflectivity of surrounding basaltic seafloor. At the termination of the megamullion the fault is imaged ∼13 km along-strike beneath a volcanic hanging-wall block at a sub-seafloor depth of 0.2-0.5 s two-way travel time, reaching north as far as 30°19′N. The eastward dipping of the fault beneath the hanging-wall block is estimated to be ∼6-14°. The corrugated fault surface is underlain by a continuous, strong, and relatively smooth reflection (D) at 0.2-0.25 s sub-bottom below the central axis of the dome. This reflection deepens up to 0.6 s sub-bottom beneath the western slope and it appears to intersect the seafloor on the eastern slope. We suggest that Atlantis massif formed by sequential slip on two different detachment faults that merged at depth, with breakaways as little as ∼2 km apart. The initial detachment is represented by reflection D, and the second corresponds to the presently exposed fault surface. In this interpretation, much of the sliver between the faults is interpreted to be strongly serpentinized peridotite with reduced seismic velocity; it lies in contact with less altered, higher-velocity mantle below the first detachment, resulting in the strong, smooth character of reflection D. Mantle rocks exposed in the megamullion indicate that the feature formed during a period of extreme tectonic extension and probably limited magmatism. In conjugate crust corresponding to termination of the megamullion, observed sub-bottom reflections are interpreted as base of seismic layer 2A. This layer is as thick as or thicker (∼570-900 m) than layer 2A in normal Atlantic crust, and it suggests that relatively normal crustal accretion occurred by the time the megamullion stopped forming.     

东北帕米尔中新世中下地壳物质的折返过程：公格尔西滑脱剪切带的构造变形与年代学证据

公格尔西滑脱剪切带位于东北帕米尔公格尔片麻岩穹窿西缘。通过我们详细的野外观测、显微构造观察、石英电子背散射衍射(EBSD)测试以及锆石U-Pb测年,对公格尔西滑脱剪切带的几何学、运动学特征及其形成演化时限进行了研究。公格尔西滑脱剪切带糜棱岩中大量的石榴子石、矽线石和蓝晶石等表明其为高级变质产物。S/C组构、旋转碎斑及不对称褶皱等变形现象说明剪切带上盘向W或SW低角度剪切的运动特征。高级变质糜棱岩和浅色岩脉记录约20 Ma的206 U-238Pb锆石年龄,说明公格尔西滑脱剪切带初始形成于早中新世。结合前人研究成果,我们认为公格尔西滑脱剪切带曾是狭长的帕米尔中下地壳滑脱带的最北段。由于新生代印度亚洲大陆碰撞以后印度板块仍持续向N俯冲推进,帕米尔地壳由S向N开始增厚,进变质作用最初发生于南帕米尔,约20 Ma时到达北帕米尔。东北帕米尔中下地壳物质开始折返于中新世中期。而直到6~4 Ma,东北帕米尔公格尔地区开始快速隆起,此时公格尔新生代高级变质岩才快速折返。     

西藏南羌塘增生杂岩中俯冲反向驱动高压变质岩折返:来自猫耳山大型拆离断层的启示

大洋岩石圈俯冲增生过程中可能伴随着复杂的深部板片运动过程。高压变质岩无疑是记录这些深部过程的良好载体。最近的研究提出,在特定情况下,双向俯冲中占主导的俯冲板块拖曳另一侧板块发生反向运动,从而短板片可能被另一侧长板片拖出。该研究提示我们关注俯冲增生过程中这种可能的“不正常”的板片运动方式,从而客观而全面地剖析碰撞造山带。现有高压变质岩折返模式中,除了俯冲隧道流模式,其余模式均强调单次快速折返。然而,俯冲反向运动导致的折返过程有所不同:对单个高压变质岩来说仍是快速折返,但是对整体高压变质岩带来说,整个俯冲反向期间必然都存在高压变质岩折返,从而形成较长的折返过程持续时间。对上地壳层次的折返相关构造变形的研究有助于揭示上述过程。     

三门峡断陷盆地及邻区深部结构及成因——来自深地震反射与大地电磁测深的证据

近年来,围绕三门峡断陷盆地中的油气、地热资源做了大量的工作,成因机制研究较少,严重制约了矿产资源的勘探开发。本文在前人研究工作基础上,结合野外地质调查并利用高精度深反射地震剖面、大地电磁（MT）、重磁等地球物理探测技术,对三门峡盆地进行综合研究。发现三门峡盆地主要由东、西2个负花状构造构成,西花状构造体大于东花状构造体;盆地东部边缘以观音堂隆起与洛阳凹陷相邻,观音堂隆起发育有壳内透镜状低速体,其东、西两侧均发育有规模较大的隐伏逆断层。研究区内莫霍面为大约5 km厚度滑脱层,在深反射地震剖面上表现为蚯蚓状反射特征,指示滑脱层为西向运动。莫霍面滑脱层上部与下部新发现多条弧形断层。地质与地球物理资料综合研究表明,莫霍面滑脱层的解耦作用是三门峡断陷盆地花状构造形成的主因;在不同时空构造力系作用下,形成研究区新生代全地壳旋转花状构造盆地。     

聂拉木地区高喜马拉雅岩石磁组构及其构造含义

利用岩石磁化率量值椭球体与岩石构造应变椭球体的共轴性,在缺乏岩性标志层的高喜马拉雅结晶基底（聂拉木地区）进行岩石磁组构研究,进而研究喜马拉雅造山带的变形期次和过程.磁组构特征表明：磁化率各向异性度P在樟木镇北1km处的片岩最高为172,在康山桥南1km处最低,为113;百分率各向异性度H在1182%～4507%之间;磁性线理L在102～109之间,磁性面理F在106～160之间,磁性面理F比磁性线理L发育;磁化率椭球体的形状因子T在019～076之间,磁化率椭球的扁率E在104～149之间,磁化率椭球体的形状为一压扁椭球;樟木镇北1km到肉切村,平均最小磁化率主轴方向D3为S－N（除聂拉木北1km的MA9外）,大多数样品最小磁化率主轴方向倾角I3＞51°,最高达726°,局部发育有拉长形磁化率量值椭球体.本文研究结果表明,聂拉木地区早期经历强烈的韧性变形,推测可能是一条巨大的右旋逆冲韧性变形带,晚期构造掀斜.     

河南木厂河区银、金、铜矿床的构造控矿特征

河南木厂河地区,位于秦岭-大别山中央造山带的东部,桐柏-大别构造亚带东段。区内以长期活动的NWW-近EW向深大断裂及派生的NWW向,SN向断裂以及平行于东部郯庐断裂带的NE向断裂为主要特征,褶皱表现为形态复杂的宽缓线形。通过调查研究,确认了木厂河矿区存在三个构造岩石单元:核杂岩单元(CC)、超高压单元(UHP)、高压单元(HP).各单元之间发育有大型的拆离断层,有利于成矿元素富集。本区矿床的形成与大别山超高压变质带折返后的伸展拆离作用密切相关。矿体形成部位主要在核杂岩单元之上,超高压单元之下的拆离断层带。拆离断层对本区的矿化起了重要的控制作用。      

Distribution of large-scale detachment faults on mid-ocean ridges in relation to spreading rates

Large-scale detachment faults on mid-ocean ridges （MORs） provide a window into the deeper earth. They have megamullion on their corrugated surfaces, with exposed lower crustal and upper mantle rocks, rela- tively high residual Bouguer gravity anomaly and P-wave velocity, and are commonly associated with ocean- ic core complex. According to 30 detachment faults identified on MORs, we found that their distances to the axis mostly range from 5 to 50 km, half-spreading rates range from 6.8 to 17 mm/a, and activity time ranges from recent to 3 Ma. Most of the detachment faults are developed on the slow spreading Mid-Atlantic Ridge （MAR） and ultra-slow spreading Southwest Indian Ridge （SWIRl, with the dominant half-spreading rates of 7-13 mm/a, especially 10-13 mm/a. Furthermore, they mostly occur at the inside corner of one segment end and result in an asymmetric seafloor spreading. The detachment faults on MORs are mainly controlled by the tectonism and influenced by the magmatism. Long-lived detachment faults tend to be formed where the ridge magma supply is at a moderate level, although the tectonism is a first-order controlling factor. At the slow spreading ridges, detachment faults tend to occur where local magma supply is relatively low, whilst at the ultra-slow spreading ridges, they normally occur where local magma supply is relatively high. These faults are accompanied by hydrothermal activities, with their relationships being useful in the study of hydrothermal polymetallic sulfides and their origin.