Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.     

Transformation of Lambert Conic Conformal Coordinates from a Global Datum to a Local Datum

This paper treats the problem of how to transform from global datum, for example, from the International Terrestrial Reference System (ITRS), to a local datum, for example, regional or national, for the practical case of the Lambert projection of the sphere or the ellipsoid-of-revolution to the cone. We design the two projection constants n(ϕ₁, ϕ₂) and m(ϕ₁) for the Universal Lambert Conic projection of the ellipsoid-of-revolution. The task to transform from a global datum with respect to the ellipsoid-of-revolution E_A,B² to local datum with respect to the alternative ellipsoid-of-revolution E_a,b², without local ellipsoidal height, is solved by an extended numerical example. Ideas in this paper could be of interest to those working with maps and coordinates transformation from global geodetic datum to local geodetic datum and vice versa, under the Universal Lambert Conic projection, and applicable to precise positioning and navigation, boundary demarcation and determination in the marine environment.     

新建水坝对下游已建水工建筑物的影响分析

分析了新建水坝及社会经济发展因素对坝下游水流及泥沙的影响，用一个简易河床模型来说明新建大坝后下游河床的演变规律，通过坝下游河床一般演变分析来阐述局部冲刷对已建水工建筑物基础的影响及对已建水工建筑基础的防护措施。     

一种基于异步串行口的IBM-PC局部网

在综合的科学考察船上以异步通讯口实现的IBM-PC局部网具有较好的性能价格比。本文介绍了该网的联网环境、网络系统的组成及其拓扑结构、网络的服务功能以及网络软、硬件的安装和配置。     

青岛局地风特征的分析

本文根据位于胶州湾东岸的青岛沧口和流亭两机场气象台和唠山区气象台资料及现场实验资料对胶州湾东岸的海陆风气候特征,来自胶州湾与来自南面黄海水域的两支海陆风相互作用及其对沧口地区的影响,崂山西坡下坡风的气候特征及影响进行了分析。文中还提出了一种根据常规气象观测资料估算海陆风发生频率的方法。     

思林水电站通航建筑物高边坡稳定分析和评价

应用ANSYS结构分析软件,模拟了思林水电站通航建筑物高边坡的地形、地质条件以及开挖的过程,建立边坡开挖的有限元计算分析模型,分析边坡在自然状态、分级开挖以及锚杆支护加固等工况下的应力、变形及其整体稳定性.定义单元的局部安全系数,得到了边坡开挖加固后稳定安全系数的分布.根据计算成果,指出现设计加固措施可以保证边坡稳定,无需增加其他工程措施.     

A combined study of macroseismic data and focal mechanisms applied to the West-Bohemian earthquake,Czechoslovakia

The main shock of the West-Bohemian earthquake swarm, Czechoslovakia, (magnitudem=4.5, depthh=10 km) exhibits an irregular areal distribution of macroseismic intensities 6° to 7° MSK-64. Four lobes of the 6° isoseismal are found and the maximum observed intensity is located at a distance of 8 km from the instrumentally determined epicentre. This distribution can be explained by the energy flux of the directS wave generated by a circular source, the hypocentral location and focal mechanism of which are taken from independent instrumental studies. The theoretical intensity, which is assumed to be logarithmically proportional to the integrated squared ground-motion velocity (i.e.,I=const+log v ² (t)dt), fits the observed intensity with an overall root-mean-square error less than 0.5°. It is important that the present intensity data can also be equally well explained by the isotropic source. The fit was attained by means of a horizontally layered model though large fault zones and an extended sedimentary basin suggest a significant lateral heterogeneity of the epicentral region. The results encourage a broader application of the simple modelling technique used.     

Mobility of heavy metals from tailings to stream waters in local zinc smelting activities contaminated site

It has been found that stream waters were severely contaminated with wastes from a long-time smelting factory in Hezhang, Guizhou, China. The main sources of contamination are the smelting wastes stored in the open air and abandoned in the vicinity of stream. A method of lead isotope was adopted in order to identify relations between tailings and water contamination. Representative samples of tailings and stream sediments were collected. Mineralogical characterizations were conducted using XRD and TEM/SEM, while acid digestion was carried out for determining metal contents. BCR sequential leaching tests were performed in order to assess metal mobility. The tremendous ‘actual＇ and ‘potential＇ mobility of heavy metals indicates that the smelting waste and stream sediments present a considerable threat to the environment. Besides the chemical remobilization of heavy metals from the sediments and the reworking of riverbed sediments act as a secondary source of pollution. Also groundwater and stream water were sampled in specific locations and were measured.     

On the Importance of Geolithological Features for the Estimate of the Site Response: The Case of Catania Metropolitan Area (Italy)

The evaluation of seismic site response in the urban area of Catania was tackled by selecting test areas having peculiar lithological and structural features, potentially favourable to large local amplifications of ground motion. The two selected areas are located in the historical downtown and in the northern part of Catania where the presence of a fault is evident. Site response was evaluated using spectral ratio technique taking the horizontal- to-vertical component ratio of ambient noise. Inferences from microtremor measurements are compared with results from synthetic accelerograms and response spectra computed at all drillings available for this area. Such method is particularly suitable in urban areas where the nature of the outcropping geological units is masked by city growth and anthropic intervention on the surface geology. The microtremor H/V spectral ratios evaluated at soft sites located within the downtown profile tend to be smaller than that usually reported in the literature for such soils. A tendency for amplifications to peaks near 2 Hz is observed only in some sites located on recent alluvial deposits. Evidences for amplifications of site effects (frequency range 4–8 Hz) were observed in the sampling sites located on the fault, with a rapid decrease of spectral amplitude just a few tenths of metres away from the discontinuity. Numerical simulations evidenced the importance of geolithological features at depth levels even greater than 20–30 m. Besides this, the results strongly confirm the importance of the subsurface geological conditions, in the estimate of seismic hazard at urban scale.     

Spontaneous Structural Reform in Australian Local Government: the case of the Gilgandra Co-operative Model in New South Wales

Dire financial constraints and the threats of forced structural reform have had the unforeseen effect of forcing municipal councils across Australia to reconsider their operational activities and organisational arrangements. With considerable ingenuity, numerous municipalities have proposed and sometimes adopted new structural formations that embody various forms of co-operative service provision. This remarkable development has unfortunately been largely ignored in the scholarly literature on Australian local government. In a modest effort aimed at remedying this neglect, the present paper seeks to outline the small, rural New South Wales Gilgandra Shire Council's (2004) ‘Co-operative/Local Government Service Company’ model, place it in the broader context of alternative models of local governance suitable for Australian conditions, and evaluate its characteristics.