区位进入理论与企业集团的国际化扩张——以海尔集团为例

中国企业集团是改革开放以后出现的大型企业组织 ,在经济全球化的背景下 ,研究其国际化扩张具有重大现实意义。本文在详细介绍Hayter的国际企业区位进入理论的基础上 ,以海尔集团为例 ,分析了企业集团的国际化扩张过程 ;其次 ,分析了海尔集团所具有的进入优势以及所面临的空间进入壁垒。海尔集团所具有的进入优势有管理与文化优势、技术创新优势、产品质量优势、营销优势 ,但还面临着心理距离、企业规模小以及东道国政策的限制等空间壁垒。最后 ,提出了有关企业集团国际化扩张的一些对策。     

Analysis of DNAPL infiltration in a medium with a low-permeable lens

In this paper we study the infiltration of DNAPL in a porous medium containing a single low-permeable lens. Our aim is to determine whether or not DNAPL infiltrates into the lens. A key role is played by the capillary pressure: DNAPL cannot infiltrate into the lens unless the capillary pressure exceeds the entry pressure of the lens. In the model this is reflected by an interface condition, the extended capillary pressure condition. To derive analytical approximations we first consider a steady-state DNAPL plume in a homogeneous medium. This results in an estimate of the DNAPL plume width as a function of depth, and an asymptotic solution for small saturations. Assuming that the extent of the lens is much larger than the width of the unperturbed DNAPL plume in the homogeneous medium, we derive an explicit criterion for DNAPL infiltration into the lens in terms of a critical inflow rate. A numerical algorithm is presented in which the extended capillary pressure condition is incorporated. The numerical and analytical results show good qualitative agreement. This revised version was published online in August 2006 with corrections to the Cover Date.     

An experimental study on water entry of asymmetric wedges

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.     

Momentum and gravity effects during the constant velocity water entry of wedge-shaped sections

Computational fluid dynamics analysis was used to investigate the added mass momentum, flow momentum and gravity effects during the constant velocity water entry of wedge-shaped sections with deadrise angles from 5° to 45°. It is shown that the added mass continues to increase for a time after chine immersion and that added mass can be estimated in terms of a constant added mass coefficient and an effective wetted width. A momentum theory is presented in which the water entry force is explained as the sum of the rate of change of added mass momentum, which becomes zero at immersion to chine depth ratios greater than about three, and the rate of change of flow momentum, which continues at deep immersions. The effect of gravity on the water entry force is given as the hydrostatic force together with the force necessary to create the potential energy in the water pile up. Hydrodynamic forces are not significantly changed by the effect of gravity on the flow fields.     

AutoCAD二次开发在绘制管线竣工图中的应用

介绍了通过AutoCAD二次开发绘制管线竣工图的方法,阐述如何实现数据文件导入CAD,长度统计,信息要素导入等功能.     

Wedge impact with the influence of ice

This work presents a canonical study on a wedge entering water near a single piece of ice using computational-fluid-dynamics (CFD) and a Wagner-type theoretical model with corrections for non-linear effects. Calculations for a series of conditions with ice of different sizes and locations relative to the wedge are conducted. The hydrodynamic force due to impact, the pressure distribution on the wedge surface, and the pile-up phenomenon are examined to study the role of ice in the impact process. The theoretical model is shown to be accurate and can serve as a useful method to assess slamming loads under the influence of ice. It is shown that even for the case of a small piece of ice, the slamming force on the wedge can increase by 30%.     

A two-dimensional analytical model of vertical water entry for asymmetric bodies with flow separation

The vertical water entry of asymmetric two-dimensional bodies with flow separation is considered. As long as there is no flow separation, linearised Wagner's theory combined with the modified Logvinovich model has been shown to provide computationally fast and reliable estimates of slamming loads during water entry. Tassin et al. [11] introduced the fictitious body continuation (FBC) concept as a way to extend the use of Wagner's model to separated flow configurations, but they only considered symmetric bodies. In the present study, we investigate the ability of the FBC concept to provide accurate estimates of slamming loads for asymmetric bodies. In this case, flow separation may not occur simultaneously on both sides of the body. During an intermediate phase, slamming loads are governed by a competition between the local drop in pressure due to partial flow separation and the ongoing expansion of the wetted area. As a first benchmark for the model, we consider the water entry of an inclined flat plate and compare the FBC estimates with the results of a nonlinear model. Then, we consider the case of a foil and compare the FBC results with computational fluid dynamics predictions. In both cases, we find that the FBC model is able to provide reliable estimates of the slamming loads.     

中资企业研发国际化研究述评

中资跨国公司研发国际化服务于中国"全面提高开放型经济水平"和"创新驱动发展战略"两大政策方针,是重要的地理学研究前沿。本文系统评述了中资企业研发国际化的定义、理论基础、研究内容、数据和方法,发现基于发达国家跨国公司实践建立起的经典理论还不足以解释中资企业行为。相比于快速发展的中资企业跨国研发活动行为,现有的实证研究存在着研究视角、内容和方法的局限,未来应发扬地理学多尺度研究的优势,综合分析企业研发国际化与区域发展的互动机制;发扬地理学重视区域差异的优势,开展在"一带一路"国家中资企业研发国际化的异质性研究;发扬地理学重视实地调研的优势,综合多种方法和数据的相互印证。     

楔形体在波浪中自由入水的数值模拟

物体入水时波浪的影响不可忽略,基于流体力学模型采用VOF法,并利用自定义函数,模拟了楔形体的自由入水过程;同时结合推波板原理及海绵层消波理论实现了数值水槽的造消波,完成了波浪中楔形体自由入水的模拟,计算了楔形体入水时所受的水作用力、自由液面变化及物面压强分布等,研究了不同波高、周期以及在波浪不同位置入水时对楔形体的影响。结果表明:本文建立的数值模型可很好地模拟楔形体入水造成的射流及空泡的形成发展过程,波浪对楔形体入水的影响主要由波浪内部流场变化及表面波形决定,在波浪不同位置处入水对楔形体受力及入水形态均有较大影响。     

Sustainable development and mine management

The sustainable development concept has generated a large body of literature. It has also divided economists into numerous schools of thought. The neoclassical, London, and other schools are painted in broad strokes in the first part of this paper. They debate the extent to which manufactured capital and “natural” capital are believed to be substitutes or complements in a macroeconomics context. The problem stems from the difficulty to measure “natural” capital. The second part of the paper looks at sustainable development in mining at the firm level. First, it is argued that the capital value of the mineral reserves can be maintained by discovering reserves or by saving part of the rent. Second, we show that mine manager actions can be induced to follow efficiency and equity principles when proper limits or constraints are imposed by the legislator. It is concluded that a set of indicators need to be defined and calibrated to ensure that the economic, environmental, and social limits imposed on the mine manager become a framework inside which he competes for the best interest of the firm.