双酶法制备低黏度辛烯基琥珀酸淀粉钠的工艺条件

对双酶法制备用作微胶囊壁材的低黏度辛烯基琥珀酸淀粉钠的工艺路线与工艺条件进行了研究。正交实验结果表明 ,在酯化淀粉乳质量浓度 2 0 %、每 g淀粉α 淀粉酶的用量为 6SKBU的条件下 ,影响产品性能的各因素中 ,糖化酶的用量对产品的DE值和流度的影响最大 ,各因素的重要性依次是 :糖化酶的用量、糖化酶作用时间、α 淀粉酶保温作用时间。最佳工艺条件是 :α 淀粉酶保温作用时间 4min ,每 g淀粉糖化酶用量 0 .2GAU ,糖化酶作用时间 2 .5h ,此时产品的DE值为 30 ,流度为 80左右     

氢化物发生及其在分析检测领域的应用

论述了氢化物发生的条件和普遍性及其在分析检测领域的应用,这些领域包括试样分解,分离富集,容量分析、比色分析、原子荧光光谱、原子吸收光谱、电感耦合等离子体原子发射光谱、电感耦合等离子体质谱等分析测试技术。     

氢化物发生-原子荧光光谱法直接测定地球化学样品中痕量碲

采用硝酸-氢氟酸-高氯酸溶解样品,以Fe3+作减缓剂,不需分离富集,用氢化物发生-原子荧光光谱法直接测定地球化学样品中痕量碲。对测定介质、KBH4浓度、铁盐的作用等条件进行试验。方法检出限为0.0031μg/g,精密度(RSD,n=11)<6.10%。方法用于国家一级地球化学标准物质中痕量碲的测定,结果与标准值一致。     

Usefulness of geological,mineralogical, chemical and chemometric analytical techniques in exploitation and profitability studies of iron mines and their associated elements

Due to the high number of variables involved in mine profitability studies, it is often very difficult to establish connections among them in order to provide a blend of market saleable quality products. In this sense, analytical chemistry together with chemometry are essential and indispensable disciplines to tackle these studies. The aim of this work was to demonstrate the utility of these disciplines to carry out optimization studies of iron mines. For this purpose, one of the most important iron mines of the Iberian Peninsula was chosen, sited in the mountain range of Sierra Menera, near the location of Ojos Negros (Teruel, Spain). Geological, mineralogical and chemical composition of 148 samples was analyzed, corresponding to different depths of three drill holes (named TE1, TE2 and TE3). In particular, aspects concerning to chemical composition are very important, since the mean contents of certain elements, such as phosphorus, sodium and potassium, should be restricted to the established limits to prevent that companies can drive back the raw material if they do not fulfil the necessary requirements. On the other hand, the large number of analysed samples drove us to use a statistical processing of the data. Among other aspects, it provides a way to find possible connections among a high number of variables and classify samples into compositional groups sharing similar composition, in order to limit the mineralised area and to obtain enough information about the amount of those chemical elements associated to iron ores. Data obtained from all these analytical techniques were in good agreement and provide a methodology that can be of wide interest applied to different geological studies.     

流动注射-氢化物发生原子荧光法测定海洋沉积物样品中痕量铅

铅是一种具有累积性的有害元素,是海洋监测调查中沉积物介质的必测元素之一,常用测定方法有双硫腙分光光度法、火焰原子吸收光谱法、无火焰原子吸收光谱法等[1],前两种方法灵敏度较低,测定时一般需要预富集,操作较繁琐;后一种方法虽然灵敏度高,但仪器昂贵,对操作人员要求高.氢化物发生原子荧光法由于灵敏度高、检出限低且线性范围宽,在铅的分析中日益被重视.     

论氢化物的形成及其在分析测试领域的应用

论述了氢化物形成的普遍性、氢化物的物理化学性质、元素周期系各类元素的氢化物类型。认为一些金属离子、非金属离子在酸性介质中与硼氢化钾（钠）作用及金属锌等强还原剂作用生成氢化物。综述了氢化物的形成在分析测试领域的应用：试样分解、分离富集、容量分析、光度分析、原子光谱分析、质谱分析。     

氢化物发生-原子荧光光谱法测定地球化学样品中痕量碲

采用焙烧富集分离地球化学样品中痕量Te,并用氢化物发生原子荧光光谱法测定。通过实验确定出方法的最佳实验条件,在此条件下获得的检出限为0.005μg/g,线性范围0.025~10μg/g,精密度(RSD,n=8)为5.03%~9.24%。方法已用于国家一级地球化学标准物质中痕量Te的测定,结果与标准值基本相符。     

温和水热法制备MZr2(PO4)3(M=Na,K,Rb)

在温和的水热条件下分别制备出纯净的磷酸锆钠 [NaZr2 (PO4) 3 ]、磷酸锆钾 [KZr2 (PO4) 3 ]和磷酸锆铷 [RbZr2 (PO4) 3 ]。研究了原料配比、矿化剂 (氟离子 )、反应时间和温度等水热晶化条件对产物生成的影响。发现在较宽的温和水热条件下可以制得这三种磷酸锆盐 ;随着碱金属离子的增大 ,产物的生成条件越来越窄 ;最佳制备条件是 :F- ZrO2 =2、P2 O5 ZrO2 =3 (均为摩尔比 )、[ZrOCl2 ]=0 6mol L、反应温度 1 5 0℃、反应时间 2天。用水热法没有制备出同一系列磷酸锆盐中的磷酸锆锂 [LiZr2 (PO4) 3 ]和磷酸锆铯 [CsZr2 (PO4) 3 ]。采用XRD、SEM、IR、Raman和XPS等现代物化仪器对产物的结构与物相纯度进行了测定与表征     

氯化钠浮选剂概述

综述了各类氯化钠浮选剂对氯化钠的浮选。并对各类浮选剂的浮选性能进行了比较。