Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

紫阳滑坡治理工程实例分析

本文介绍紫阳骨坡治理工程中有关抗滑桩的设计与施工。文中详细地论述了设计中设计人员应根据工程的具体情况去灵活处理的一些技术问题，如确定有关参数的选择原则，计算上的条件简化和一些具体技术细节的处理方法等．     

Application of stress release models to historical earthquakes from North China

Univariate and multivariate stress release models are fitted to historical earthquake data from North China. It is shown that a better fit is obtained by treating separately the Eastern part of the region, including the North China Plain and Bohai Sea, and the Western part of the region, including the Ordos Plateau and its Eastern boundary. Further improvement is obtained by fitting the large events (M7.6) and smaller events in the Western region by different stress release models. The comparisons are made by computing the likelihoods of the fitted models and discounting the number of parameters used by Akaike's AIC criterion. The models are used to develop long-term risk scenarios for the East and West regions.     

Internal colonisation, hegemony and coercion: Investigating migration to Southern Lazio, Italy, in the 1930s

This paper investigates the Italian fascist regime’s use of internal colonisation as part of a wider ruralisation policy aimed at promoting population growth, curbing rural-urban migration, staunching emigration, and halting the spread of industrial urbanisation. By focusing on the case study of the Pontine Marshes, the paper demonstrates how, through targeted selection procedures aimed at displacing defined social and political undesirables, migrants were chosen and effectively coerced into migrating to the “fascist” landscape of the marshes. The area, reclaimed and developed in the 1930s, was celebrated as a sign of the regime’s engineering and social success. The paper utilises Antonio Gramsci’s thought on hegemony, and argues that the overt use of coercion hints at the fact that fascism, although ideologically totalitarian and hegemonic, was contested. Although statisticians, demographers and state bureaucrats were organised and institutionalised in the construction of hegemony based on consent, fascism based itself more in coercion than in passive consent in the case of internal colonisation.     

Inertial and hydrodynamic inertial loads on floating units

The analysis of the dynamic behavior of floating units usually employs a coordinate system with origin in the unit's center of gravity, which significantly simplifies the global mass matrix. Hydrodynamic coefficients are then computed considering the same coordinate system. However, to analyze other conditions of mass distribution and maintain the simplicity of a global mass matrix, it is necessary to determine again the hydrodynamic coefficients, thereby reducing the efficiency of the entire process. Another important point is that the geometries frequently used in floating units are such that the cross-terms of an added mass are relatively unimportant when compared with the main terms, and it is, therefore, common to use only some of them to analyze the unit's dynamic behavior. Recently, however, in the search for production systems suitable for water depths greater than 3000 m, other geometries have been considered in technical and economic feasibility studies. It is possible that for these new geometries all terms of the added mass matrix must be included in the analysis. This paper presents the full development used to determine the complete global mass matrix, the inertial and hydrodynamic inertial loads that make use of the added mass matrices considering any coordinate system and the six degrees of freedom, including all cross-terms.     

海洋环境荷载下输液立管的静、动力特性研究

考虑管内流动流体和管外海洋环境荷载共同作用 ,建立海洋立管侧向运动微分方程。用Hermite插值函数离散 ,在微机上编写海洋立管静、动力分析程序 ,通过计算分析研究管内流体对立管侧向变形和应力的作用 ;另外 ,探讨管内流体的流动速度和立管顶端的预张力对立管动力特性的影响。结果表明 ,立管变形和应力均随管内流体流动速度增加而增大 ,同时内流速度的增大会降低立管的固有频率 ,但适当增大立管顶端预张力会抵消内流流速增加引起的固有频率下降。     

历史地震资料与地震的中长期预测

故障诊断模型的基本内容是根据动态系统的外部特征来判断系统内部是否发生故障及确定故障发生的部位、时间和大小。由于故障诊断技术在监测及诊断故障的思路上和地震预报有很多相似之处，因此，把故障诊断技术应用于地震预报是可行的。由于该模型与其他数学模型一样，需要有较多的学习过程，所以历史地震资料在该模型中有重要作用。而其中的鲁棒性故障诊断模型在抑制各子模型的个性，凸现其共性方面有其特有的性质，所以把它作为一种综合模型，能抑制各子模型的个性，突出在地震预测方面的共性，从而提高预测的精确性。本文根据一个实例，说明了这种综合性模型的可行性。在文章的最后，由信息量的分析，说明了模型的鲁棒性特征。