渤海湾盆地新生界生油岩系底界面温度分布

依据渤海湾盆地2000余口测温井的地温梯度数据、地层岩性描述、分层数据以及钻井资料,计算了该盆地各生油岩系底界面的温度。统计结果表明:渤海湾盆地沙河街组大部分凹陷区地层底界面温度介于90℃至150℃,目前仍具有大量生油的温度条件,而在隆起或一些凸起地区,该地层组段温度普遍小于90℃,未能达到生油的温度指标。东营组和孔店组地层也仍具有一定的生油温度条件。研究还表明:地层温度与地层界面埋深密切相关,温度随界面埋深的增大而升高,沉积厚度大的凹陷区地层界面温度大于沉积厚度小的凸起区或斜坡地带,说明地层界面埋深是决定地温高低的主要控制因素,而地温梯度对地层界面温度的影响相对较小。     

Artificial Upwelling of Deep Seawater Using the Perpetual Salt Fountain for Cultivation of Ocean Desert

Deep seawater in the ocean contains a great deal of nutrients. Stommel et al. have proposed the notion of a “perpetual salt fountain” (Stommel et al., 1956). They noted the possibility of a permanent upwelling of deep seawater with no additional external energy source. If we can cause deep seawater to upwell extensively, we can achieve an ocean farm. We have succeeded in measuring the upwelling velocity by an experiment in the Mariana Trench area using a special measurement system. A 0.3 m diameter, 280 m long soft pipe made of PVC sheet was used in the experiment. The measured data, a verification experiment, and numerical simulation results, gave an estimate of upwelling velocity of 212 m/day. This revised version was published online in July 2006 with corrections to the Cover Date.     

河口潮位在频域内的一种插补模型

若把河口潮位时间序列简单地看为单输入和输出线性系统模型的输入输出信号，借助频谱分析可以将它们在频域内的关系建立起来，用来进行潮位序列的插补，带通滤波技术的应用可使模型的计算精度大大提高     

地理信息服务中数据传输性能分析

地理信息服务系统具有数据密集型和计算密集型的特点,对网络环境的设置有着特殊的需求。本文从地理信息服务系统中对数据传输应用的角度出发,从网络数据传输协议的传输层和应用层两个层次分析地理信息服务系统应用的特殊性,并根据系统应用的特殊需求提出相应的解决方案,提高整个应用系统中各类数据传输的效率、性能和系统运行的稳定性,提高地理信息服务系统为多用户提供地图服务、位置服务以及各种应用服务的综合能力。提高系统适应多用户并发访问海量数据的地图服务作业和频繁访问实效性很强的位置服务作业的能力。     

矿产预测中成矿信息的提取和强化

成矿信息的提取是矿产预测的重要手段,其方法的有效性直接影响到预测成果的可靠性。在成矿规律研究的基础上,有意识地干预模型的构成,突出与成矿有关的信息;抑制某些成矿意义不明显和属干扰的信息,有目的地使模型向反映成矿信息的方向逼近,提高模型与矿床实际赋存地质环境的吻合程度,均是成矿信息提取和强化的内涵。本文从研究实践中总结了先验约束模型和非先验约束模型的强化方法,在新疆阿勒泰地区的地质－找矿工作中已取得     

Enhancement of radon signals in geophysical studies with the track technique

The existence of a suspected geological fault has been confirmed using Solid State Nuclear Track Detectors (SSNTDs) by measuring radon concentration variations in the upper soil above its inferred position. The results obtained prompted us to increase the natural radon signal in the soil, using an additional radon source; this enhancement technique, has been experimentally checked with SSNTD detectors.On leave from Faculté des Sciences, Laboratoire des D.S.T.N. Université de Dakar, Dakar-Fann, Sénégal     

The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.     

应用航磁数据分维计算推断火成岩的分布

计算巴彦浩特盆地航磁异常的分维数, 对计算出的分维数绘制等值线图, 并根据分形特征对该地区的火成岩进行划分, 得到了以往直接对航磁异常图进行推断解释所不能得到的良好地质效果。最后讨论如何选取最佳窗口和最佳网格来计算分维数, 并对此提出了2个经验。     

Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.