S－闭空间上的函数

研究了当Ｘ为Ｓ－闭空间时，Ｃ（Ｘ）的子集Ｆ为紧的充要条件，从而扩充了著名的Ａｓｃｏｌｉ定理。     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

数字水准仪标尺编码原理研究

数字水准仪的标尺编码规则直接影响其测量精度.基于现有几种数字水准仪标尺编码的特点,归纳出标尺条码的编码衡量指标:信息密度、分辨率和纠错能力.以条码的最大编码容量与单个码区长度之比值衡量其承载的信息密度;利用光学系统的点扩散函数研究条码图像的分辨率,即相邻边缘的相互影响,得出码元相邻边缘的间距相等时,影响最小的结论;用相关系数或编码所用函数本身的性质表征条码的纠错能力.依据编码指标建立一套新的标尺编码规则:以格雷码为数值码,固定宽度的码元为参考码,两者交替组合.分析表明,该种编码不但信息密度大,分辨率高,而且纠错能力强.     

均匀设计与灰色理论在边坡稳定性分析中的应用

采用均匀设计安排试验,运用灰色理论中的灰色关联分析考察边坡稳定性影响因素的主次.结果表明,边坡稳定性影响因素的敏感性由大到小依次为:粘聚力、内摩擦角、重度、预应力、锚索间排距、锚索长度、锚固段长度、锚固角.可见,岩体的抗剪强度指标是影响边坡稳定性的最重要参数,其次是岩体的容重,而预应力锚索的设计参数对边坡的稳定性也有一定影响.这一分析结果为边坡开挖设计和加固方案的优化提供了重要依据.     

等截面单桩抗拔承载性状试验研究

在基坑中对等截面单桩进行了抗拔静载试验，在桩身设置应变式钢筋计，成功测得桩身各截面的应变数据。分析试验所得数据，对试验抗拔桩抗拔系数的取值、侧摩阻力的发挥、混凝土桩身的开裂等进行了探讨，相应给出了抗拔桩的设计建议。     

均匀设计在室内大型注浆试验研究中的应用

介绍了均匀设计试验方法的特点及优越性，利用试验点在试验范围内的均匀分布，能大大减少试验次数且获得较好的试验效果。将均匀设计方法引入到注浆试验研究中，并对试验进行了详细设计，实践表明，均匀设计试验法是一种有效、可靠的试验设计方法。     

基于SVG的地理信息编码与DOM交互解析实现

SVG作为新兴的基于XML的矢量图形描述规范，在很多方面与地理信息系统中的基本概念表述一致。在对地理信息进行SVG编码的基础上，利用DOM对地理信息SVG编码文档进行解析，实现了基于SVG的Web地理信息发布实例。实验表明，采用SVG技术的通用性好、矢量显示质量高、响应速度快的优点来开发地理信息的Web应用，也是顺应Web地理信息发布发展需要的。     

Probabilistic analysis of peak response of MDOF systems with uncertain PSD function

The use of uniform hazard spectra which have the same probability of exceedance at different frequencies has been proposed for the future version of the National Building Code of Canada. Commonly used combination rules to estimate the peak responses of multi‐degree‐of‐freedom (MDOF) systems are the square root of sum of squares rule and the complete quadratic combination rule. However, the probability that the peak response of a MDOF system exceeds the one estimated by using these rules with the peak modal responses from the uniform hazard spectra cannot be inferred directly. The assessment of the probability of exceedance of the peak response of MDOF systems is presented by considering that the uncertainty in seismic excitation due to all potential earthquakes can be lumped in the power spectral density function of the ground acceleration with uncertain model parameters. This probability is evaluated based on the random vibration of linear systems and the first‐order reliability method. It is found that the under‐ or over‐estimations are less than about 5 or 10% if the modal contributions are not within 10–90% of, or not within 20–80% of, the absolute sum of the effective modal peak responses, respectively. Otherwise, severe under‐ or over‐estimation could result. Copyright © 2002 John Wiley & Sons, Ltd.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

基岩水的壁间运动及基本特征

本文通过对基岩水与孔隙水的比较分析，介绍了基岩水的分布、水动力学和水化学特征，指出了基岩水运动具有均位趋势、选择流动及汇流特性，得出了渗流理论不宜用于基岩水的结论。