A critical state model for sands dependent on stress and density

An elastoplastic model for sands is presented in this paper, which can describe stress–strain behaviour dependent on mean effective stress level and void ratio. The main features of the proposed model are: (a) a new state parameter, which is dependent on the initial void ratio and initial mean stress, is proposed and applied to the yield function in order to predict the plastic deformation for very loose sands; and (b) another new state parameter, which is used to determine the peak strength and describe the critical state behaviour of sands during shearing, is proposed in order to predict simply negative/positive dilatancy and the hardening/softening behaviour of medium or dense sands. In addition, the proposed model can also predict the stress–strain behaviour of sands under three-dimensional stress conditions by using a transformed stress tensor instead of ordinary stress tensor. Copyright © 2004 John Wiley & Sons, Ltd.     

差分法周跳探测与修复方法改进

在目前常用的周跳探测与修复方法基础上 ,提出了首先将观测资料按照观测历元不连续分成若干小弧段 ,然后利用差分法进行周跳探测 ,根据差分后周跳放大的特性判断周跳和野值 ,并确定其位置利用宽带组合和电离层组合的方法解算周跳大小。通过实例验证了其有效性。     

2D/3D Dust Continuum Radiative Transfer Codes to Analyze and Predict VLTI Observations

Radiative Transfer (RT) codes with image capability are a fundamental tool for preparing interferometric observations and for interpreting visibility data. In view of the upcoming VLTI facilities, we present the first comparison of images/visibilities coming from two 3D codes that use completely different techniques to solve the problem of self-consistent continuum RT. In addition, we focus on the astrophysical case of a disk distorted by tidal interaction with by-passing stars or internal planets and investigate for which parameters the distortion can be best detected in the mid-infrared using the mid-infrared interferometric device MIDI. This revised version was published online in July 2006 with corrections to the Cover Date.     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

Robe's restricted three-body problem revisited

Robe's restricted three-body problem is reanalyzed with a view to incorporate a new assumption, namely that the configuration of the fluid body is that described by an hydrostatic equilibrium figure (Roche's ellipsoid). In the concomitant gravitational field a full treatment of the buoyancy force is given. The pertinent equations of motion are derived, the linear stability of the equilibrium solution is studied and the connection between the effect of the buoyancy forces and a perturbation of the Coriolis force is pointed out.     

Microboudin structures of piemontite along the Sambagawa metamorphic belt, Japan: implications for lateral variation of differential stress during regional metamorphism

Evidence is presented of a lateral variation in differential stress during metamorphism along a regional metamorphic belt on the basis of the proportion of microboudinaged piemontite grains (p) in a quartz matrix in metacherts. It is proposed that p is a practical indicator of relative differential stress. Analysis of 123 metacherts from the 800 km long Sambagawa metamorphic belt, Japan, reveals that p‐values range from < 0.01 to 0.7 in this region. Most samples from Wakayama in the mid‐belt area have p‐values of 0.4–0.6, whereas those from western Shikoku have p‐values of < 0.1. This difference cannot be explained by variations in metamorphic temperature, and is instead attributed to a regional, lateral variation in differential stress during metamorphism.     

Palomar Testbed Interferometer Observations of Young Stellar Objects

We present observations of a sample of Herbig AeBe stars, as well as the FU Orionis object V1057 Cygni. Our K-band (2.2μm) observations from the Palomar Testbed Interferometer (PTI) used baselines of 110 m and 85 m, resulting in fringe spacings of ∼4 mas and 5 mas, respectively. Fringes were obtained for the first time on V1057 Cygnias well as V594 Cas. Additional measurements were made of MWC147, while upper limits to visibility-squared are obtained for MWC297, HD190073, and MWC614. These measurements are sensitive to the distribution of warm, circumstellar dust in these sources. If the circumstellar infrared emission comes from warm dust in a disk, the inclination of the disk to the line of sight implies that the observed interferometric visibilities should depend upon hour angle. Surprisingly, the observations of Millan-Gabet, Schloerb and Traub (2001)(hereafter MST) did not show significant variation with hour angle. However, limited sampling of angular frequencies on the sky was possible with the IOTA interferometer, motivating us to study a subset of their objects to further constrain these systems. This revised version was published online in July 2006 with corrections to the Cover Date.     

天文光干涉与综合孔径技术的发展

本文简单介绍了光干涉与综合孔径技术发展的历史、国际上用于天文观测的一些著名光干涉仪的技术特点和进展、以及近年来我国开展的与光干涉 ,综合孔径技术有关的工作 ,最后简要介绍了在光学综合孔径技术领域所发展的光纤与集成光学等新技术     

Potential of the VLTI for linking stellar frames to ICRF

The question of positioning the optical counterparts of the ICRF quasars is outlined in the perspective of future space astrometry missions, which ultimately will bring a new realization of the ICRS in the optical range. Ground-based interferometry with a dual-field observing mode (PRIMA/VLTI),together with the missions DIVA and FAME, will have a key role in building an extragalactic reference frame in the optical/near-IR range with about the same accuracy as that of the present (VLBI) primary frame. This revised version was published online in July 2006 with corrections to the Cover Date.     

GENIE – The Darwin demonstrator

Darwin is a cornerstone mission of the Horizons 2000+ program of the European Space Agency. It has the express purpose of carrying out the first direct search for terrestrial exoplanets, and to achieve unprecedented spatial resolution in the infrared wavelength region. The detection and study of terrestrial exoplanets promises to usher in a new era in science and will affect a broad spectrum of disciplines. Further, the time line for implementation of such an instrument is now likely to be of the close order of 10 years, leading to possible answers to one of mankind's most fundamental questions in the second decade of the 21st century. It has been found that in order to realize am interferometer in space in the next 10–15 years, it is necessary to prepare the way through a number of intermediary steps – both on the ground and in space. In this context, we here describe GENIE – a ground based nulling interferometry experiment to be implemented at the VLTI in a partnership between ESA and ESO. This revised version was published online in July 2006 with corrections to the Cover Date.