A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

关于改进的Encke方法中参考轨道的选择和校正

对于改进的Ｅｎｃｋｅ方法，选择适当的参考轨道是一个关键．然而，对于人造地球卫星长弧轨道计算，目前所给出的几种参考轨道均需要逐段校正，这将给定轨问题带来附加的复杂性．本文将仔细探讨如何选择参考轨道和减少校正次数．     

地震前后垂直形变场动态演化的量化指标

提出一种表达垂直形变场动态演化过程的量化指标——区域应变率、应变集中度。在此基础上，对南北地震带各水准监测区近30年的垂直形变资料进行了实际计算．并结合具体震例进行了对比研究。结果表明：量化指标在一定程度上能够反映地震前后形变场的动态演化过程和地壳运动状态，对地震的中长期预报有一定的积极意义。     

CCD联合平差方法及其初步实例检验

在常规照相天体测量工作中 ,对暗天体的定位是采用逐级定标星过渡的方法实现的。由于星表系统差和局部差的存在 ,最终定位结果可能包含难以把握的误差积累。在CCD小视场观测情况下时常难以找到足够数量的定标星。鉴于此 ,推导了CCD观测联合平差方法的严格矢量表达式 ,以期通过共同星的过渡 ,实现大天区统一平差。原理上此方法可实现相对于河外天体的定位 ,以削弱星表系统差和局部差对定位结果的影响。讨论了CCD联合平差方法实现中的问题 ,包括底片常数模型选择、切点位置改正、共同星的较差改正和法方程解算方法等 ,并分析了具体的处理措施。用实例初步检验了CCD联合平差方法的效果 ,表明通过对多张CCD观测的联合平差 ,可以削弱单张CCD观测参考星数目过少、单张CCD观测参考星分布不均、个别参考星存在位置偏差和局部区域参考星存在系统性位置偏差等不利因素对归算结果的影响 ,进而达到扩大视场和提高归算精度的目的     

有限元法与伪谱法混合求解弹性波动方程

在地震波场数值模拟中,有限差分法、有限元法和伪谱法都是常用的基本方法,但它们各有不同的适应性和优缺点,如有限差分法、有限元法都存在减弱网格频散和提高计算效率的矛盾,而伪谱法的网格频散小且计算效率高.有限差分法和伪谱法在处理地表结构复杂或地表剧烈起伏以及地下结构复杂的情况时存在较大的难度,而有限元法可较为理想地拟合起伏地表和任意弯曲界面,且可方便地处理自由边界条件和界面边界条件.尝试将有限元法和伪谱法相结合,形成地震波场数值模拟的一种混合方法,利用二者的优点,克服二者的缺点,达到既减弱网格频散又提高计算精度和效率的目的.并采用所谓的‘过度区域‘技术解决两种不同算法的衔接问题.模拟实例表明,给出的混合模拟方法不失为弹性波场数值模拟的一种有效方法.     

差分观测与伪距观测的定位精度

严格论证了在对空间或地面目标的定位中,利用伪距测量观测模型的几何因子大于用台站间一次差分观测模型的几何因子.此外,台站间完全差分测量观测的定位精度优于不完全测量情形的定位精度.这些结果给人们在实际工作中采取何种定位方式提供了可靠的理论依据.     

An approach to quantitative analysis of regional economic links

Aimed at promoting regional coalitions and expanding the approach to economic links, this paper puts forward some new concepts such as link intensity and receiving coefficient, expounds the indexes of quantitative analysis of economic links and establishes the quantitative-analysis model of economic links. With help of the model, this paper calculates the values of the link intensities between Su-Xi-Chang (Suzhou-Wuxi-Changzhou) region and Shanghai, and analyzes the regional difference of the economic links.     

宁夏香山-天景山弧形断裂带新活动特征及1709年中卫南71/2级地震形变带

本文根据野外地质填图和水系位移测量结果,论述了香山-天景山弧形断裂带新生代有两个不同活动性质的阶段,即早期阶段的强烈挤压和晚期阶段的左旋走滑兼挤压。分析、讨论了不同活动阶段的时间界限和转变原因。指出了1709年中卫南71/_2级地震形变带的表现形式、延伸范围     

The double solid reactant method: II. An application to the shallow groundwaters of the Porto Plain,Vulcano Island (Italy)

This paper presents an example of application of the double solid reactant method (DSRM) of Accornero and Marini (Environmental Geology, 2007a), an effective way for modeling the fate of several dissolved trace elements during water–rock interaction. The EQ3/6 software package was used for simulating the irreversible water–rock mass transfer accompanying the generation of the groundwaters of the Porto Plain shallow aquifer, starting from a degassed diluted crateric steam condensate. Reaction path modeling was performed in reaction progress mode and under closed-system conditions. The simulations assumed: (1) bulk dissolution (i.e., without any constraint on the kinetics of dissolution/precipitation reactions) of a single solid phase, a leucite-latitic glass, and (2) precipitation of amorphous silica, barite, alunite, jarosite, anhydrite, kaolinite, a solid mixture of smectites, fluorite, a solid mixture of hydroxides, illite-K, a solid mixture of saponites, a solid mixture of trigonal carbonates and a solid mixture of orthorhombic carbonates. Analytical concentrations of major chemical elements and several trace elements (Cr, Mn, Fe, Ni, Cu, Zn, As, Sr and Ba) in groundwaters were satisfactorily reproduced. In addition to these simulations, similar runs for a rhyolite, a latite and a trachyte permitted to calculate major oxide contents for the authigenic paragenesis which are comparable, to a first approximation, with the corresponding data measured for local altered rocks belonging to the silicic, advanced argillic and intermediate argillic alteration facies. The important role played by both the solid mixture of trigonal carbonates as sequestrator of Mn, Zn, Cu and Ni and the solid mixture of orthorhombic carbonates as scavenger of Sr and Ba is emphasized.

Experimental constraints on the effects of pressure and H2O on the fractional crystallization of high-Mg island arc basalt

H₂O-undersaturated melting experiments of synthesized basalt (SiO₂ = 50.7 wt.%, MgO = 8.3 wt.%, Mg# = 60) were conducted at fO₂ corresponding to NNO+1 and NNO−1 to clarify the effects of pressure (2–7 kbar) and H₂O on fractional crystallization in island arcs. H₂O content was ranged from nominally anhydrous to 4.4 wt.%. Differentiation trends, namely the liquid lines of descent, change sensitively according to pressure-H₂O relations. Tholeiitic differentiation trends are reproduced with H₂O ≤ ∼2 wt.% in primary magma. With such quantities of H₂O, fractional crystallization is controlled by olivine + plagioclase at 2 kbar. Increasing the pressure from 2 to ≥4 kbar induces early crystallization of orthopyroxene instead of olivine and therefore SiO₂ enrichment in the residual melts is suppressed. Increasing H₂O (≥ ∼2 wt.% in primary magma) stabilizes clinopyroxene relative to orthopyroxene and/or magnetite. Although the phase relations and proportions strongly depend on fO₂ and H₂O content, differentiation trends are always calc-alkaline.