Influence of soft clays on the response spectra for structures in eastern Canada

The 1990 edition of the National Building Code of Canada (Associate Committee of the National Building Code, National Research Council, Ottawa, 1990) makes a clear distinction between eastern and western Canada in terms of seismic acceleration and velocity zones. While it is well established that ground motions can be amplified significantly through loose clay deposits, no results are available that take into consideration the typical high frequency content of ground motions in eastern Canada. This paper develops ground amplification curves for clays having depths between 10 and 70 m excited by typical eastern Canadian ground motions scaled to two different values of peak horizontal accelerations. Simplified free-field spectral design curves, which could be used by structural designers, are proposed. The curves show that maximum spectral accelerations occur for structural periods between 0.2 and 0.5 s. In addition, soil depth does not appear to be an important parameter controlling the response of typical clay deposits in eastern Canada.     

SANICLAY: simple anisotropic clay plasticity model

SANICLAY is a new simple anisotropic clay plasticity model that builds on a modification of an earlier model with an associated flow rule, in order to include simulations of softening response under undrained compression following K_o consolidation. Non‐associativity is introduced by adopting a yield surface different than the plastic potential surface. Besides, the isotropic hardening of the yield surface both surfaces evolve according to a combined distortional and rotational hardening rule, simulating the evolving anisotropy. Although built on the general premises of critical state soil mechanics, the model induces a critical state line in the void ratio–mean effective stress space, which is a function of anisotropy. To ease interpretation, the model formulation is presented firstly in the triaxial stress space and subsequently, its multiaxial generalization is developed systematically, in a form appropriate for implementation in numerical codes. The SANICLAY is shown to provide successful simulation of both undrained and drained rate‐independent behaviour of normally consolidated sensitive clays, and to a satisfactory degree of accuracy of overconsolidated clays. The new model requires merely three constants more than those of the modified Cam clay model, all of which are easily calibrated from well‐established laboratory tests following a meticulously presented procedure. Copyright © 2006 John Wiley & Sons, Ltd.     

饱和粉砂不稳定性的试验研究

通过对净砂和级配良好粉砂(含10 %粉土)进行一系列三轴固结不排水试验（CU）,研究了粉土、孔隙比和围压对饱和粉砂不稳定性的影响。试验结果表明,净砂与粉砂在不排水剪切条件下均会出现应变软化现象（即不稳定性）。同一围压下脆性指数(IB)随孔隙比增加,但不稳定线的应力比随孔隙比增加而减小。引用等效粒间孔隙比(ege)后,净砂和粉砂在ege-ln p?平面上拥有基本相同的临界状态线。在临界状态理论及等效粒间孔隙比的基础上,提出在同一修正状态参数(?ge)下净砂和级配良好粉砂有相似的不稳定性。     

闽南：台湾浅滩渔场变性水团的初步分析

根据聚类方法，对闽南－台湾浅滩渔场变性水团进行划分，本海区共有６个变性水团。讨论各个变性水团在不同季节消长变化规律。     

A Note on Soil Structure Resistance of Natural Marine Deposits

It has been well documented that natural normally-consolidated marine soils are generally subjected to the effects of soil structure. The interpretation of the resistance of soil structure is an important issue in the theory study and engineering practice of ocean engineering and geotechnical engineering. It is traditionally considered that the resistance of soil structure gradually disappears with increasing stress level when the applied stress is beyond the consolidation yield stress. In this study, however, it is found that this traditional interpretation of the resistance of soil structure can not explain the strength behavior of natural marine deposits with a normally-consolidated stress history A new interpretation of the resistance of soil structure is proposed based on the strength behavior. In the preyield state, the undrained strength of natural marine deposits is composed of two components: one developed by the applied stress and the other developed by the resistance of soil structure. When the applied stress is beyond the consolidation yield stress, the strength behavior is independent of the resistance of soil structure.     

Sample Disturbance in Soft and Sensitive Clays: Analysis and Assessment

Despite the sophisticated methods employed to obtain high quality samples, they are prone to disturbance, due to stress release, let apart, due to sampling tools and techniques adopted. Critical reappraisal of different methods suggest that any method of sample quality assessment involving strength and deformation parameters would enable easier implementation and correct other engineering parameters for estimated sample disturbance. In this technical paper, sample disturbance index, using merely the slopes of compression paths, (representing mechanical response), in the pre- and post-yield stress regimes under odeometric loading conditions is proposed. This method is based on single oedometer test results on samples of unknown degrees of disturbance during sampling and handling. The unique feature of this approach is that the ideal rigid plastic material behavior is taken as reference. This eliminates the need for any additional experimental data or any calculations from the relationships formulated with any set of assumptions.     

聚类分析法在浅海水团分析中的应用及黄、东海变性水团的分析

本文引入变性水团概念,用聚类分析确定黄、东海浅海海域变性水团的边界及其变化。根据给定的标准进行聚类,确定了水团的个数、边界及混合区。 由聚类方法所得结果看出,在该海区中有八个变性水团。根据温、盐相对指标,将这些水团分为九种不同的特征。也可以把这些水团划分为三种盐度类型。在温—盐点聚图上,不同变性水团的温盐点,分布于一条曲线附近,它体现出逐级变性的特点。各变性水团的变化范围都很大,这说明该海区中水团变性强烈。在暖季中的增温降盐和冷季中的降温增盐,可认为是整个黄海和东海水体变性的特征。所有季节性水团都经历一个形成与消亡的过程。 文中讨论了变性水团和海洋环境的相互关系。水团变性是热力因素和动力因素共同作用而产生的。通过变性水团的分析,作者认为,在该海区水团的变性中,热力因素起着主要作用。变性水团界线的舌状分布与流向之间的关系是很明显的,可作为分析环流的旁证。最后描述了变性水团和底层中心渔场之间的关系。     

Natural and man-induced stress evolution of slopes: the Monte Mario hill in Rome

The paper deals with stress-release effects induced by man-made cuts or excavations into natural stiff clay slopes that experienced erosion in response to valley deepening. The study was focused on the Monte Mario hill in Rome (Italy), which formed part of an area of recent urban expansion. The methodology of the study relied on a reference engineering-geology model, which was developed on the basis of site and laboratory data and stress–strain analyses. The latter analyses were carried out with the finite-difference code FLAC 4.0. Numerical modelling was based on a sequential approach, taking into account the main evolutionary stages of the Tiber river valley in Romeȁ9s urban area and then making cuts at the bottom of the slope located south of the Monte Mario Astronomical Observatory. The simulation revealed the stress-release effects that fluvial erosion and excavation fronts have caused on the investigated slopes and their consequent gravitational instabilities. These processes appear with metre-scale displacements, followed by stress-release cracks (actually observed on the slopes under review). In quantifying stress-release deformations, the simulation took into account the possible role of creep in the observed retardation of stress-release effects.Research activities were carried on with the co-operation of Dȁ9Arcangelo A. (Consorzio TREESSE, andrea.darcangelo@libero.it) and Moretti S. (IMG S.r.l. Servizi Tecnici per lȁ9Ingegneria e lȁ9Ambiente, moretti@img-srl.it)     

A Solution to the Problem of Predicting the Suitability of Silty–clayey Materials for Cement-stabilization

Major geotechnical problems in construction involving silty–clayey soils are due to their low strength, durability and high compressibility of soft soils, and the swell–shrink nature of the overconsolidated swelling soils. Confronted with these problems, a suitable ground improvement technique is needed, for deep excavations in soft clays, for stability, durability and deformation control. Cement-stabilization is one of the alternatives. An increase in strength and durability, reduction in deformability are the main aims of this method. Conventional cement-stabilization methods are used mainly for surface treatment. However, the use of cement has recently been extended to a greater depth in which cement columns were installed to act as a type of soil reinforcement (deep cement–soil mixing and cement jet grouting). In situ engineering properties of these silty–clayey soils are often variable and difficult to predict. For this reason cement-stabilization methods have a basic target to control the aforementioned engineering properties of these clays so that the properties of a silty–clayey soil become more like the properties of a soft rock such as clayey shale or lightly cemented sandstone. So cement-stabilization of these soils is essential to control their engineering properties and to predict their engineering behaviour for construction. In an effort to predict, classify and study the suitability of silty–clayey soils for cement-stabilization both slaking and unconfined compressive strength tests were carried out on clayey–sand mixtures consisted of two types of clays, kaolin and bentonite. Finally diagrams were prepared to study the variation of slaking and strength due to compaction, curing time and cement percentage and also to predict areas of efficient cement-stabilization.