Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

A high resolution,multiproxy Late‐glacial record of climate change and intrasystem responses in northwest England

A lacustrine carbonate sequence from Hawes Water, Lancashire, UK, has been studied using stable isotopic, lithological, pollen and mineral magnetic analysis. The data reveal four abrupt climatic oscillations in the Late‐glacial Interstadial leading up to the onset of the Loch Lomond Stadial. The data also point to climatic warming relatively early within the stadial, ca. 12 500 GRIP yr, prior to the onset of the Holocene. The oxygen isotope record is taken as a signature of climate forcing against which the response of the lake‐system can be monitored. By adopting this approach it is revealed that the response of the biological system to the rapid climatic oscillations is non‐linear and primarily a function of the antecedent conditions. A significant end‐Devensian isotopic excursion (A) is matched by only minor changes in the cold‐adapted floras and faunas. During the warmer interstadial, the response of the biological ecosystem (events B–D) is clearly influenced by thresholds: major changes in the catchment vegetation associated with relatively minor oscillations in the isotopic signature. The stratigraphical patterns reveal significant lag effects between the onset of climate deterioration and resulting changes in vegetation. Copyright © 2002 John Wiley & Sons, Ltd.     

利用高光谱数据进行植被生化成分反演方法研究

高光谱数据包含着丰富光谱信息,能够定量地分析物质成分^[1]。由高光谱数据,可以运用多元逐步线性回归方法反演植被生化组分含量,从而达到监测植被生长状况的目的^[2]。本文具体介绍了多元逐步线性回归方法,及其在氮、木质素和纤维素含量估算中的应用。     

Prediction of local scour around circular piles under waves using a novel artificial intelligence approach

Abstract

The scour phenomena around vertical piles in oceans and under waves may influence the structure stability. Therefore, accurately predicting the scour depth is an important task in the design of piles. Empirical approaches often do not provide the required accuracy compared with data mining methods for modeling such complex processes. The main objective of this study is to develop three data-driven methods, locally weighted linear regression (LWLR), support vector machine (SVR), and multivariate linear regression (MLR) to predict the scour depth around vertical piles due to waves in a sand bed. It is the first effort to develop the LWLR to predict scour depth around vertical piles. The models simulate the scour depth mainly based on Shields parameter, pile Reynolds number, grain Reynolds number, Keulegan–Carpenter number, and sediment number. 111 laboratory datasets, derived from several experimental studies, were used for the modeling. The results indicated that the LWLR provided highly accurate predictions of the scour depths around piles (R?=?0.939 and RMSE = 0.075). Overall, this study demonstrated that the LWLR can be used as a valuable tool to predict the wave-induced scour around piles.     

海上矿石运输最优船队的组建

针对海上矿石运输，介绍了一种完成定量任务并能使投资费用最少为目标的最优船队组建方法，同时对易变参数进行了灵敏度分析，使决策更加科学化     

受扰线性系统的前馈-反馈最优控制

针对具有外部持续扰动的线性系统，研究前馈-反馈最优控制律的设计问题。给出了最优控制律的存在唯一性条件。并提出了最优控制律的设计算法。利用滤波器解决了前馈控制的物理不可实现问题。仿真结果表明，此算法易于实现，与传统的反馈最优控制相比对抑制外部扰动具有较强的鲁棒性。     

基于坐标归一化和奇异值分解的直接线性变换解法

直接线性变换方法是数字摄影测量和计算机视觉领域最常用的解析处理方法之一,特别适用于未检校数码相机的三维测量,但直接线性参数间的相关性、物方控制的约束和设计矩阵元素数量级的较大差异,均可导致法矩阵严重病态,从而影响解的稳定性。本文借鉴改进的八点基本矩阵估计算法,采用基于坐标归一化和奇异值分解的解法,即首先将像点和物点坐标进行相似变换得到归一化坐标后组成法矩阵,其次利用矩阵奇异值分解方法代替常规的最小二乘方法,模拟和真实数据表明,此方法可以有效提高解算精度和稳定性。     

遥感图像线性影纹理解专家系统设计与实现

线性影纹信息是遥感图像中的一类重要信息,线性影纹信息自动提取是遥感图像智能解译的重要研究领域。笔者采用基于特征对象的专家系统技术来完成线性影纹信息的简单类别提取,设计并实现了线性影纹理解专家系统;阐明了系统结构,解译规则获取、表达,基于消息的不确定性推理机及解释机的设计;最后利用系统做了线性影纹类别提取实验,结果表明基于特征对象的专家系统用于线性影纹类别自动提取是切实可行的,并具有较高的提取精度。     

多尺度空间线状实体形状相似关系的表达与度量

本文对空间数据多尺度表达中线状实体综合前后的形状相似性进行了描述、分析和研究。通过调查统计,得出了衡量线状实体形状相似程度的两个重要参量SIMⅠ、SIMⅡ,基于这两个参量给出了空间线状实体形状相似性的定义以及在不同尺度下线状实体形状相似性的度量方法,并用实例进行验证。为空间数据多尺度表达时线状实体的形状表达提供了一种分析和评价手段。     

Analysis on the sources of mercury in soils in the Chengdu Basin, China

Mercury is a pollutant of concern due to its toxic and bioaccumulative properties. Studies on the distribution and hazard of mercury in the environment are mainly focused on its forms, toxicity and the environment standard, and progresses and results have been achieved. But these studies in the past were concentrated on the scales of laboratory or smaller districts merely, such as a small unit of mineral area, vegetable base, paddy field, lake, etc. Multi-target regional geochemical survey carried out by China Geological Survey from the 1990s to now is a fundamental and commonweal geological survey, large-scale and systematical inquisition and research were conducted in 19 provinces （or municipalities directly under the Central Government） in the eastern overlay region of China, and the purpose is to provide the basic geochemical data for national economic construction, adjustment of industrial and agricultural structures and sustainable social development. Geochemical studies aim at investigating soils in these regions and 52 elements have been tested, producing a great amount of data at the same time. Methods： based on the data from 3061 samples of surface soil and 832 samples of deep soil from the project of multi-purpose geochemical survey in the Chengdu Basin, Sichuan, China, this paper describes the correlation relationship between Hg and other 48 elements and their spatial distribution in surface and deep soils of these areas by applying the method of linear regression and factor analysis.