基于规则库和网格算法的土地利用现状图自动数字注记

图形自动注记可极大地提高制图的工作效率。针对土地利用现状图数字注记的特点,本文从地图认知角度出发,建立注记自动配置的规则库,提出面状要素自动注记的一种新的算法——网格法。该算法最大的优点是容易实现、效率高,可方便地解决注记压盖冲突等问题。通过开发一个程序实例,对图斑要素进行了自动数字注记,实验表明95％以上的图形注记效果都较为理想。     

Optimization of nonconventional wells under uncertainty using statistical proxies

The determination of the optimal type and placement of a nonconventional well in a heterogeneous reservoir represents a challenging optimization problem. This determination is significantly more complicated if uncertainty in the reservoir geology is included in the optimization. In this study, a genetic algorithm is applied to optimize the deployment of nonconventional wells. Geological uncertainty is accounted for by optimizing over multiple reservoir models (realizations) subject to a prescribed risk attitude. To reduce the excessive computational requirements of the base method, a new statistical proxy (which provides fast estimates of the objective function) based on cluster analysis is introduced into the optimization process. This proxy provides an estimate of the cumulative distribution function (CDF) of the scenario performance, which enables the quantification of proxy uncertainty. Knowledge of the proxy-based performance estimate in conjunction with the proxy CDF enables the systematic selection of the most appropriate scenarios for full simulation. Application of the overall method for the optimization of monobore and dual-lateral well placement demonstrates the performance of the hybrid optimization procedure. Specifically, it is shown that by simulating only 10% or 20% of the scenarios (as determined by application of the proxy), optimization results very close to those achieved by simulating all cases are obtained.     

几种常用物化探制图软件与MAPGIS之间的数据转换

GeoMDIS2000、Surfer、PGDB1.0、MAPGIS等软件在物化探数据处理与成图方面各有所长,生产中经常将这几类软件结合起来使用。在数据转换过程中会遇到统一色库的问题,本文着重介绍了通过修改软件内部色库相应色标的RGB值(或CMYK值)的办法来解决此问题,并达到了事半功倍的效果。     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

基于灵敏度分析的结构损伤识别中的传感器优化配置

本文提出了结构损伤识别中的传感器测点优化配置的方法。该方法是通过仅考虑结构刚度变化的结构特征灵敏度分析，以结构各自由度的损伤信息为条件，计算出结构的Fisher信息阵，并且考虑到Fisher信息阵的逆阵可能不存在，而将Fisher信息阵对应于每个自由度进行分解，通过计算每个分解的Fisher信息阵的迹而确定每个自由度含有的损伤信息的多少，从而从结构的全部自由度中去掉那些含损伤信息少的自由度。建立直接利用结构不完整的实测模态来定位结构的损伤，避免结构模态扩阶带来不必要的误差。最后，通过数值算例表明，该方法能有效地识别出结构的损伤。     

Productivity Profiles of PhD-Granting Geography Departments in the Unites States: 1980–1994

In our study, 48 U.S. departments that grant geography PhDs are compared along four measures of academic productivity. Using 1980–1994 as the base period, research productivity of faculty was assessed by counting book titles, as well as authorships in 77 journals. Teaching productivity was determined by placement of PhDs in graduate programs of geography in North America, and by a weighted index of teaching outcomes. Data were summed for departments, but are reported primarily as productivity per person (per FTE count). The results point to a wide variety of departmental profiles, from those departments that appear to emphasize teaching outcomes to those that are more productive in book publishing and journal authorship, with several exhibiting a balance between teaching and research.     

Effects of Young's modulus on fault displacement

Elastic crack models predict a linear relationship between displacement (u) and rupture (trace) length (L) during slip in a fault zone. Attempts to find universal-scaling laws for L/u, however, have generally failed. Here I propose that these attempts have failed because they do not take into account the changes in the mechanical properties, in particular Young's modulus (stiffness), of the fault zone as it evolves. I propose that Young's modulus affects fault displacement both spatially and temporally: spatially when the trace of a fault at a given time dissects host rocks of different stiffnesses, and temporally when the stiffness of the fault zone itself changes. During the evolution of an active fault zone, the effective Young's modulus of its damage zone and fault core normally decreases, and so does the L/u ratio of the fault. By contrast, during inactive periods sealing and healing of the damage zone and core may increase the stiffness, hence the L/u ratio in subsequent slips. This model predicts that not only will the scaling of L/u within a given fault population vary in space and time, but also that of individual faults. To cite this article: A. Gudmundsson, C. R. Geoscience 336 (2004).     

国产机载LiDAR系统安置角误差检校方案研究

机载激光扫描仪(Light Detection And Ranging,LiDAR)系统是由多个子系统集成,其中,安置角误差是集成误差中最大的误差源,安置角误差检校的方法多种多样,高效率、高精度的检校方式还需要试验的支撑。本文对平差模型法和几何模型法进行了试验分析,试验结果很好地证明了不同方法的优越性,为机载LiDAR系统的安置角检校提供了参考。     

基于ArcObject组件的地图标注研究

通过深入分析地图的标注需求,针对应用中的实际问题,利用ArcObject组件进行编程,在应用系统中实现了对各种点线面地物要素的标注功能。实践证明,以下介绍的基于ArcObject组件的地图标注系统,具有方便、快捷、准确的特点,便于推广和应用。     

一种顾及道路影响的点要素注记配置遗传禁忌搜索算法

为使地图上点要素注记配置更美观易读,利用遗传算法的全局寻优能力和禁忌搜索算法的"爬山能力",在考虑传统点要素注记配置约束条件的同时,考虑点要素与道路间的关系,提出了一种顾及道路要素影响的遗传禁忌搜索算法,并从解算精度、运行效率及稳健性3个方面对该算法进行评价。本文以福建省泉州市惠安县1：20万比例尺的乡村点状地形图数据进行试验,试验结果表明,与遗传算法、禁忌搜索算法和ArcGIS软件相比,该算法的算法精度和稳健性均有所提高,但是计算效率略低于禁忌算法,且点要素注记与点要素、道路要素的压盖量最少,与点要素、道路要素注记的交叉量最少。