Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.     

胜利二号极浅海步行坐底式钻井平台防腐措施研究

本文根据胜利二号极浅海步行坐底钻井平台的作业和工作环境特点，进行了防腐措施研究，设计了切合实际的防腐措施。该平台在海上作业近四年进坞修理，经观测防腐情况良好。     

土钉抗拔承载力的原位试验研究

根据土钉现场抗拔试验数据,分析了钉材、浆液龄期等因素对土钉抗拔承载力的影响,建议了合理的下层土钉开挖时间。最后通过试验土钉抗拔力反算土体与锚固体的极限粘结强度,并与规范推荐值进行了比较。     

粘性泥石流残留层的形成及减阻作用--以云南蒋家沟泥石流为例

通过对云南蒋家沟粘性泥石流的野外观测 ,讨论了粘性泥石流残留层的定义特征 ,在大量实测数据基础上 ,分析了残留层易形成时段的特性 ;分别对一次泥石流过程、若干阵泥石流和一阵泥石流残留层的变化进行了相关分析 ;最后用观测数据分析了泥石流残留层的减阻作用     

Inferring erosional resistance of bedrock units in the east Tennessee mountains from digital elevation data

Measures of local relief, regional relief, and slope were calculated from digital elevation models (DEMs) for 50 bedrock units in the Ridge and Valley and Blue Ridge provinces of Tennessee. Each of these measures was normalized and the three were then averaged to produce the erosional resistance index (ERI). Bedrock units with higher ERI values include coarse clastics, intermediate clastics, and metaplutonics. Units with lower values include shales, limestones, limestones plus dolostones, and carbonates plus fine clastics. Dolostones tend to have intermediate values. The calculated ERI values were compared with subjective ratings by a geologist with decades of field experience in east Tennessee. Generally, the agreement between the two ratings was good, the most glaring exception being several shales with improbably high ERI values. These turned out to be thin units cropping out beneath very hard sandstones, allowing them to stand higher and steeper than would otherwise be possible. A systematic method for detecting such erroneously high ERI values is suggested. Inspection of a drainage map superimposed on the geology map shows that in a given area, streams tend to flow on rock units with the lowest ERI values. In addition, statistical analysis shows that bedrock units with the lowest ERI values are, on average, almost three times closer to the nearest stream and six times as likely to have streams flowing on them than are units with highest values. Further, the effect of ERI on stream location is strongest for streams with drainage areas between 1 and 30 km². Thus, small streams appear to be subject to greater lithologic control than are larger streams.     

高压旋喷桩桩周土摩阻力的分析与探讨

通过对旋喷桩的单桩静载试验，探讨了桩周土摩阻力作用的情况，通过计算和分析，得出了两个结论，为旋喷桩基础的设计提供参考。     

金属腐蚀探测

本阐述了金属腐蚀的危害性和金属管道腐蚀探测的迫切性，并介绍了几种具有探测腐蚀功能的物探方法。     

论如何审核确定抗震设防要求

为使县级以上地震部门做好审核建设工程抗震设防要求工作，介绍了确定抗震设防要求的4个依据、程序、重大重要建设工程的划分依据、活动断裂分类与分级规定等。指出，确定抗震设防要求既是一项法定的行政审批工作，又是一项严谨的科学技术工作。     

Comparative study of activation energies of conductance and desiccation rates of some marine algae

Measurements of the activation energy of electrical conductance and desiccation rates on subtidal marine algae from Florida were compared to similar data from the Bay of Fundy, Nova Scotia, on intertidal marine algae frequently subjected to long periods of exposure to air. We have developed a method for calculating the reaction rate constant of desiccation of fully hydrated marine algae. Values of activation energies and desiccation rate constants are consistent with the requirements for survival of these algae under widely different environmental conditions.     

青铜文物腐蚀过程中的次生矿物

产于不同环境不同地方的青铜文物经矿相显微镜观察、电子探针成分分析和X射线衍射研究表明，在青铜文物腐蚀层中观察到次生矿物——赤铜矿、孔雀石、蓝铜矿、白铅矿和锡石。由上述矿物组成的腐蚀层在青铜器表面形成保护层。腐蚀层细分为红色赤铜矿层、绿色碳酸盐矿物层和黄色锡石层组成，其厚度小于1mm。青铜合金在潮湿条件下的腐蚀比在干旱条件下要严重，另外青铜合金是适用于作高放废物地质处置系统中的废物罐的候选材质。