Model Test Study of Dynamic Ice Force on Compliant Conical Structures

To study ice-induced vibration of a compliant conical structure,a series of model tests were performed from 2004 to 2005.In the tests,the ice sheet before the compliant conical structure was found to fail in two-time breaking.From 2005 to 2006,this type of ice failure was studied through more groups of tests.The tests show that two-time breaking is the typical failure of ice before steep conical structures,and is controlled by other factors at the same time,such as ice speed and the angle of the cone.     

Morphogenetic studies on Uronychia uncinata(Protozoa, Ciliophora) during its asexual division

ＭｏｒｐｈｏｇｅｎｅｔｉｃｓｔｕｄｉｅｓｏｎＵｒｏｎｙｃｈｉａｕｎｃｉｎａｔａ（Ｐｒｏｔｏｚｏａ，Ｃｉｌｉｏｐｈｏｒａ）ｄｕｒｉｎｇｉｔｓａｓｅｘｕａｌｄｉｖｉｓｉｏｎ￥ＳｏｎｇＷｅｉｂｏ（ＲｅｃｅｉｖｅｄＡｕｇｕｓｔ２８，１９９５；ａｃｃｅｐｔｅｄ...     

低剖面紧凑的圆盘加载单极子天线

本文介绍了一种低剖面小型化圆盘加载单极子天线.通过盘加载的方式,在中心频率5.8 GHz处,首先将单极子天线的剖面从大约12.9 mm（0.25λ₀）降低到2 mm（0.039λ₀）,实现了低剖面的特性.加载在单极子天线上方的圆盘,尺寸大概为21 mm（0.41λ₀）,因此天线具有结构紧凑的特点.接着,为了使天线具有良好的匹配,在加载圆盘四周加入4个接地通孔,并且在馈电端口加入集总电感.最终,天线在中心工作频率5.8 GHz处实现了反射系数-15 dB的匹配性能.     

FY-3微波成像仪遥感图像地理定位方法研究

MWRI (MicroWave Radiation Imager) is one of the payloads on our next generation polar meteorological satellite FY-3. MWRI conically scans with a fixed incident angle on the earth surface. It is the first time for Chinese remote sensor to use this scan mode. In this work, we present a geolocation method for FY-3 MWRI’s remote sensing image based on its special scan geometry. The integrated coordinate systems and the specific relationships with these coordinate systems are defined. A spatial relationship model between the remote sensing data and the earth-based coordinate system is established. This method also includes an algorithm of satellite orbit computation, which is used to get the satellite’s instantaneous velocity vector from its position. This method has been applied to MWRI’s remote sensing image geolocation. The results show that the accuracy of this method can achieve 1 pixel. The 33 GCPs (Ground Control Points) which are in the regiones of FY-3 MWRI’s observation have been collected and used to analyze the precision of the geolocation. By statistical analysis, the error along-track is about 1.5km, and the error along-scan is about 3.0km. It is obvious that this method fulfills the requirement of precision for FY-3 MWRI whose space resolution exceeds 5km.     

Stability of elevated liquid-filled conical tanks under seismic loading,Part I—theory

Conical steel shells are widely used as water containments for elevated tanks. However, the current codes for design of water structures do not specify any procedure for handling the seismic design of such structures. In this paper, a numerical model is developed for studying the stability of liquid-filled conical tanks subjected to seismic loading. The model involves a previously formulated consistent shell element with geometric and material non-linearities included. A boundary element formulation is derived to obtain the hydrodynamic pressure resulting from both the horizontal and the vertical components of seismic motion acting on a conical tank which is prevented from rocking. The boundary element formulation leads to a fluid added-mass matrix which is incorporated with the shell element formulation to perform non-linear dynamic stability analysis of such tanks subjected to both horizontal and vertical components of ground motion. Although, the formulation was developed for conical vessels, it is general and can be easily modified to study the stability of any liquid-filled shell of revolution subjected to seismic loading. The accuracy of fluid added-mass formulation was verified by performing the free vibration analysis of liquid-filled cylindrical tanks and comparing the results to those available in the literature. © 1997 John Wiley & Sons, Ltd.     

Shallow Drilling of Seafloor Hydrothermal Systems Using the BGS Rockdrill: Conical Seamount (New Ireland Fore-Arc) and PACMANUS (Eastern Manus Basin), Papua New Guinea

ABSTRACT

From September to October 2002, shallow drilling, using the submersible (5 m) Rockdrill of the British Geological Survey and the German R/V Sonne revealed critical information on the subsurface nature of two distinct hydrothermal systems in the New Ireland fore-arc and the Manus Basin of Papua New Guinea. Drilling at Conical Seamount significantly extends the known surface extent of the previously discovered vein-style gold mineralization (up to 230 g/t Au) at this site. Drilling the conventional PACMANUS volcanic-hosted massive sulfide deposit recovered complexly textured massive sulfide with spectacular concentrations of gold in several core sections including 0.5 m @ 28 g/t Au, 0.35 m @ 30 g/t Au, and 0.20 m @ 57 g/t Au. Shallow drilling is a fast and cost efficient method that bridges the gap between surface sampling and deep (ODP) drilling and will become a standard practice in the future study of seafloor hydrothermal systems and massive sulfide deposits.     

节理统计锥体单元法的探讨

本文提出在投影球内建立锥体单元统计系统,直接计算以产状表示的单元轴线与节理法线的夹角,统计该夹角小于单元锥角半角的数目。统计结果更合理、可靠。     

冰激锥体振动物理模拟实验

应用DUT 1非冻结可破碎模型冰进行冰激锥体振动模拟实验的实验设备和模型的设计 ,给出了低冰速和高冰速两种情况下的结构位移曲线、冰力曲线及其幅值谱分析结果 ,得出了结构卓越频率和冰速与特征长度之比的关系 ,发现冰激锥体振动同冰激柱体振动一样有“频率锁定”现象。将实验结果与已有的冰排与圆柱相互作用实验结果进行比较 ,发现冰激锥体振动和冰激柱体振动有着相似的机理