福建紫金山铜金矿床成矿流体演化数值模拟——混合和沸腾过程研究

利用ＣＨＩＬＬＥＲ软件模拟了紫金山铜金矿床主矿化阶段成矿流体的混合和局部减压等焓沸腾过程，模拟结果显示矿化具有低的ＨＳ＾－和Ｃａ＾２＋浓度，高的Ａｓ含量。在混全和沸腾过程中，随着温度和压力的降低，ｐＨ值和ｆＯ２逐渐降低，这是些金山铜金矿成矿流体的重要特征。     

斑岩型钼矿床研究进展与问题

本文在简要介绍全球重要成矿带斑岩型钼矿床品位、储量、时空分布以及构造背景的基础上,着重归纳了斑岩型钼矿床中Mo在岩浆—热液演化过程中的地球化学行为特征以及Mo在成矿流体中的迁移与沉淀机制两个方面的研究进展。取得了以下认识:形成斑岩型钼矿床成矿岩浆氧逸度(f_(O2))变化范围较大,但一般大于铁橄榄石—磁铁矿—石英(FMQ)缓冲体系。斑岩钼矿床形成的主要受岩浆房的大小,大体积的岩浆流体能否高效聚集到浅部岩株或岩脉,岩浆中的挥发分(例如F)含量等因素的控制,但与成矿花岗岩和出溶流体中Mo的含量高低无直接关系。成矿流体的氧逸度与p H降低对辉钼矿沉淀具有关键作用。除此之外,温度与盐度降低对辉钼矿沉淀也有重要作用。流体的多阶段沸腾可能对提高Mo品位具有重要意义。此外,应加强岩浆结晶分异过程、岩浆热液转化过程Mo的地球化学行为研究。     

均匀流体和不均匀流体的形成机制:来自合成流体包裹体的证据

为详细了解流体的形成机制, 对系统的流体包裹体合成实验进行研究.研究表明, 在合成流体包裹体实验中, 广泛存在流体的均一化和沸腾作用; 流体的均匀与否, 与流体p-t轨迹在TP (H₂O)-CP(H₂O)-CP(NaCl-H₂O) 曲线的部位有密切的关系.p-t轨迹在曲线上部的流体为均匀流体, 反之则为沸腾流体.但也有例外, 如在溶解曲线上被主矿物捕获的流体.这为本次研究一定条件下流体的形成机制、探讨成矿作用提供了理论依据.      

The Influence of Pan Evaporation Conditions on Na Cl crystallization

正1 Introduction Crystallization is one of important unit operations in the chemical production process,which requires not only the crystal product with high purity and yield,but also the available particle size of the crystal products to ensure product quality.Crystallization process is affected by     

内蒙古陈巴尔虎旗谢尔塔拉铁锌矿床成矿流体演化与成矿作用

内蒙古谢尔塔拉铁锌矿床位于大兴安岭中段华力西期、燕山期成矿带上,是一个大中型的火山喷发沉积-热液富集型矿床。在对谢尔塔拉铁锌矿床的物质组成分析的基础上,着重对流体包裹体和稳定同位素进行分析,以此来研究该矿床的成矿流体演化和成矿作用。研究表明,从热液作用早期到中期,具有成矿温度递减、盐度升高的趋势,两者呈负相关变化,指示流体发生了沸腾作用;从热液作用中期到晚期,具有成矿温度递减、盐度降低的趋势,两者呈正相关变化,指示流体发生了混合作用。S、Pb、C、H、O同位素组成表明,金属物质主要来自赋矿岩石和下伏地层,同时还有深部岩浆物质的参与。成矿热液为大气降水补给加热的循环地下水和岩浆水组成的的混合流体,后期又有大量的大气降水补充,使得成矿流体与围岩发生了强烈的同位素交换。矿化和蚀变作用是在水/岩比值比较低的体系中进行的。谢尔塔拉铁锌矿床的成矿流体总体表现为中低温、低盐度、低密度的热液。构造热效应、地热梯度和多次的岩浆喷气热是驱动流体活化迁移的主要因素。构造体制转换使流体稳定体系发生改变,压力释放发生沸腾作用,造就铁、锌在有利位置富集成矿。     

The oldest Mo porphyry mineralization in the Yangtze Valley Metallogenic Belt of eastern China: Constraints on its origin from geochemistry,geochronology and fluid inclusion studies at Matou

The Matou Mo(-Cu) deposit, located in the Yangtze Valley Metallogenic Belt of central-eastern China, is a typical porphyry-type Mo deposit. The orebodies at the deposit are hosted by Matou porphyritic granodiorite, which is the largest intrusive in the area. Quartz vein-type and disseminated sulfide mineralization are well developed in the porphyry and near its contact with Silurian sandstone. Crosscutting relationships indicate that porphyritic granodiorite is the oldest phase in the pluton, which is crosscut by a porphyritic diorite containing traces of chalcopyrite, and later dolerite dykes. These phases have U-Pb zircon dates of 147 ± 3, 140 ± 1 and 135 ± 1 Ma, which confirms the cross-cutting relationships observed in the field. A Re-Os molybdenite isochron age of 147 ± 4 Ma indicates that the porphyritic granodiorite is the source of the oldest Mo mineralization in the metallogenic belt and was formed during a change of the tectonic setting in the area, from an intracontinental orogeny to extensional tectonics. From 147 to 135 Ma, crust-mantle interaction played an important role in the formation of magmatic rocks at Matou. Systematic petrological and geochemistry investigations reveal that the three phases have a crust source with minor input from the mantle. Investigation of ore-forming fluid, H-O isotopes, S isotopes, and the Re content of molybdenite indicate that the ore-forming fluid and metals were derived from the lower crust. During the evolution of fluid from initial magmatic fluids (stage I) to ore-forming fluids (stage II), fluid boiling accompanied by the input of relatively cooler meteoric water led to the deposition of the Mo mineralization.     

赣南西华山钨矿床成矿流体演化特征

赣南西华山钨矿床是一个闻名中外的大型石英脉型钨矿床。为探讨成矿流体性质以及演化过程,本文对西华山石英脉型钨矿床主成矿阶段含矿石英脉中流体包裹体进行了岩相学、显微测温学研究和激光拉曼光谱分析。结果显示,西华山钨矿床的流体包裹体以H2O-NaCl型为主,局部发育H2O-NaCl-CO2型。流体热焓-盐度图解表明成矿流体以混合作用为主,局部沸腾在热液系统演化中作用不大。通过对沸腾包裹体的测温数据进行计算,得出西华山脉型钨矿成矿压力约为27～87 MPa,矿床形成深度约为1.0～3.3 km。     

浙江中生代浅成热液金银成矿作用的耗散结构模型

浙江中生代主要浅成热液金银矿床在蚀变-矿化过程中的一些物理化学特征参数(如T、P、St和ρ等)呈非线性的变化关系,其控制变量是P、T和PH值.推断条带(或环带)状构造的矿脉(石)是由减压沸腾作用造成的.据Drummond等(1985)沸腾的模拟计算和研究表明,[H+]浓度是决定沸腾热液中的Au、Ag等成矿元素命运的主要因素.因此,可以[H+]浓度(状态变量)作为序参量来反映成矿溶液中Au、Ag浓度的变化趋势;并建立其自组织过程的动力学方程与开放沸腾热液系统Au、Ag沉淀的耗散结构模型.     

Geysers of Enceladus: Quantitative analysis of qualitative models

Aspects of two qualitative models of Enceladus’ dust plume—the so-called “Cold Faithful” [Porco, C.C., et al., 2006. Cassini observes the active south pole of Enceladus. Science 311, 1393-1401; Ingersoll, A.P., et al., 2006. Models of the Enceladus plumes. In: Bulletin of the American Astronomical Society, vol. 38, p. 508] and “Frigid Faithful” [Kieffer, S.W., et al., 2006. A clathrate reservoir hypothesis for Enceladus’ south polar plume. Science 314, 1764; Gioia, G., et al., 2007. Unified model of tectonics and heat transport in a Frigid Enceladus. Proc. Natl. Acad. Sci. 104, 13578-13591] models—are analyzed quantitatively. The former model assumes an explosive boiling of subsurface liquid water, when pressure exerted by the ice crust is suddenly released due to an opening crack. In the latter model the existence of a deep shell of clathrates below Enceladus’ south pole is conjectured; clathrates can decompose explosively when exposed to vacuum through a fracture in the outer icy shell. For the Cold Faithful model we estimate the maximal velocity of ice grains, originating from water splashing in explosive boiling. We find that for water near the triple point this velocity is far too small to explain the observed plume properties. For the Frigid Faithful model we consider the problem of momentum transfer from gas to ice particles. It arises since any change in the direction of the gas flow in the cracks of the shell requires re-acceleration of the entrained grains. While this effect may explain the observed speed difference of gas and grains if the gas evaporates from triple point temperature (273.15 K) [Schmidt, J., et al., 2008. Formation of Enceladus dust plume. Nature 451, 685], the low temperatures of the Frigid Faithful model imply a too dilute vapor to support the observed high particle fluxes in Enceladus’ plume.     

鄂尔多斯盆地南部直罗油田长8油层油气沸腾包裹体群研究

运用激光拉曼光谱、包裹体充填度测定等方法对鄂尔多斯盆地直罗油田富南3井、6井长8油层裂缝岩芯充填物中包裹体群进行分析,发现富南3井、6井与英旺油田英16井长8油层中油气沸腾包裹体群完全相同,密集分布的气泡不停晃动,证实油气沸腾包裹体群不是孤立的、偶然的地质现象。富南3井、6井和英16井长8油层裂缝岩芯的原始裂缝性质为滑动-剪切裂缝和剪切裂缝,在区域构造的作用下,反复发生拉张-挤压交替活动;在拉张发生的瞬间,与裂缝沟通的油层里的原油发生减压沸腾,原油中的轻质馏分和其他流体进入裂缝空间;在随后的挤压发生时,裂缝基本封闭,一部分流体返回原来的油层,一部分被挤到别的裂隙空间形成新的油藏;残留在裂缝里的碳酸钙,在较高的地层压力下逐渐结晶,并把残留的轻质馏分包裹,形成油气包裹体;这些油气包裹体形成压力较高,又包裹着成分类似液化气的轻质馏分,在常温常压下就处于沸腾状态;这样的过程反复进行,在裂缝充填物中形成了沿着晶体生长线以及成片、成带分布的油气沸腾包裹体群。上述油气沸腾包裹体群的形成过程就是油气的地震泵运移机制,丰富了油气运移地震泵地质模型。