Rainstorm-generated sediment yield model based on soil moisture proxies (SMP)

This study develops improved Soil Moisture Proxies (SMP) based suspended sediment yield (SMPSY) models corresponding to three antecedent moisture conditions (AMCs) (i.e., AMC-I-AMC-III) by coupling the improved initial abstraction (I_a-λ) model, the SMA procedure and the SMP concept for modelling the rainfall generated suspended sediment yield. The SMPSY models specifically incorporate a watershed storage index (S) model to accentuate the transformation from storm to storm and to avoid the sudden jumps in sediment yield computation. The workability of the SMPSY models is tested using a large dataset of rainfall and sediment yield (98 storm events) from twelve small watersheds and a comparison has been made with the existing MSY model. The goodness-of-fit (GOF) statistics is evaluated in terms of the Nash Sutcliffe efficiency (NSE), and error indices, i.e., root mean square error (RMSE), normalized root mean square error (nRMSE), standard error (SE), mean absolute error (MAE), and RMSE-observations standard deviation ratio (RSR). The NSE values vary from 74.31% to 96.57% and from 75.21% to 91.78%, respectively for the SPMSY and MSY model. The NSE statistics indicate that the SMPSY model has lower uncertainty in simulating sediment yield as compared to the MSY model. The error indices are lower for the SMPSY model than the MSY model for most of the watersheds. These results show that the SMPSY model has less uncertainty and performs better than the MSY model. A sensitivity analysis of the SMPSY model shows that the parameter β is most sensitive followed by parameter S, α and A. Overall, the results show that the characterization of soil moisture variability in terms of SMPs and incorporation of improved delivery ratio and runoff coefficient relationship improves the simulation of the erosion and sediment yield generation process.     

基于旁压试验土体弹塑性本构模型初探

在大量旁压试验数据分析的基础上,通过曲线拟合,建立了旁压试验弹塑性阶段曲线的椭圆方程,利用土体SMP屈服准则和Rowe流动法则,推导出土体塑性阶段应力增量与应变增量间关系矩阵。在弹性阶段,假设土体应力-应变服从广义虎克定律,建立了基于旁压试验的土体弹塑性本构模型。编制了相应的计算程序,将文中模型计算结果与实际旁压试验曲线进行对比,初步验证了模型的正确性。将本构模型编译为ABAQUS自定义材料子程序UMAT,通过有限元对比分析,文中模型计算变形较弹性模型小,较摩尔-库仑模型大,与模型建立的假设一致。基于旁压试验的土体弹塑性本构模型参数少,且易于获取,便于在实际工程中应用。     

基于能量耗散的球孔扩张理论解答

以空间准滑动面（SMP）准则为基础,推导了扩底桩扩孔压力的理论解。从能量耗散的角度分析球孔扩张的全过程,利用应力不变量推导了符合球孔扩张的屈服准则;化简微分方程得到了弹塑性区应力表达式,进而求出位移、应变表达式;分别利用体积守恒和能量守恒性推导出扩孔压力的表达式。该法考虑了塑性区弹性变形,并得到了扩孔压力p、塑性区半径R与扩孔半径a的关系。算例分析表明,该方法计算的扩孔压力与现场试验得出的结果较好地吻合,塑性区半径和扩孔压力均随扩孔半径的增加而增大,但增幅逐渐减小而趋于稳定值,剪胀角对塑性区半径和扩孔压力影响显著,随着剪胀角的增加,塑性区半径和扩孔压力明显增加。     

基于广义SMP破坏准则的柱形孔扩张问题理论分析

采用应力跌落的简化应力-应变模型考虑土的应变软化特性,同时采用简化的体积应变?v与大主应变?1及大主应变?1与小主应变?3之间的相互关系反映土的剪胀特性,根据空间准滑动面(SMP)理论和平面应变轴对称问题的柱形孔扩张基本方程,推导并给出一般黏性土中柱形孔扩张问题的应力场、应变场、位移场、塑性区半径和孔扩张压力。通过算例分析,探讨了土的剪胀因素、软化特性对孔扩张问题的影响程度。为了反映中主应力的影响,将本文解与基于Mohr-Coulomb破坏准则的解答进行了比较。计算结果表明,土的剪胀性和软化特性及中主应力对孔扩张问题的影响是显著的,基于Mohr－Coulomb破坏准则的孔扩张解答往往偏于保守。     

基于SMP准则柱孔扩张问题相似解

以柱孔扩张理论为基础,将柱孔扩张后塑性区半径b作为时间刻度,引入扩孔速度概念,将塑性区内任意一点的应力、应变描述成塑性区半径b和柱孔扩张后扩张体单元距孔心距离r的函数,采用平面应变条件下无黏性土的SMP准则和不相关联流动法则,考虑到无黏性土的剪胀性,推导出柱孔扩张后极限扩张力 的相似解。通过参数分析表明,土体强度和剪胀性对塑性区半径和极限扩张力产生很大的影响,即随着土体强度和剪胀性的增加,极限扩张力明显增加,相应塑性区半径却随之减小。通过与基于摩尔-库仑准则解答进行对比分析表明,考虑中间主应力影响的SMP准则所得到的极限扩张力明显高于基于摩尔-库仑准则的解答。该解答为无黏性土中进行静力触探（CPT）试验和静压桩等岩土工程问题提供必要的理论依据。     

基于广义SMP准则及应力路径法的柱孔扩张分析

柱孔扩张理论广泛用于旁压试验机制分析、沉桩挤土效应等岩土工程问题中。基于经典的Vesic孔扩张理论,采用能够考虑中主应力效应的广义SMP屈服准则,并结合有限应变理论对均质土体中柱孔扩张问题进行分析,根据应力路径假设提出确定塑性区平均体应变的解析步骤。通过大量变参数计算给出具有不同刚度指标 、泊松比 和内摩擦角 的土中柱孔扩张极限状态下的塑性区平均体应变、孔扩张半径比和孔扩张系数。分析结果表明, 、 、 越大,塑性区平均体应变越小,塑性区半径比越大,孔扩张系数越大;随着 增加, 的变化对孔扩张系数的影响更显著。同时,将结果与基于Mohr-Coulomb准则的孔扩张解答进行比较,探讨不同土性参数时中主应力效应对孔扩张系数的影响。文中分析方法及给出的考虑中主应力效应的柱孔扩张系数表可为原位试验分析及桩侧摩阻力估算提供参考。     

多处理器平台下Linux2．6启动过程中的位图分析

在多处理器体系结构下,Linux在嵌入式平台已经得到了越来越广泛的使用。在详细分析多处理器平台下Linux启动过程的基础上,从系统使用及编程者的角度,深入剖析了其中相关的位图建立处理机制及其作用,得出了在多处理器及多核平台下进行Linux操作系统移植的总体思路。     

平面应变条件下M-C材料屈服时的中主应力公式

基于Mohr-Coulomb准则,通过引入罗德角参数及Mohr-Coulomb准则平面应变等效广义Mises准则,推导了平面应变条件下材料屈服时的中主应力公式,并给出其与基于SMP准则（Spatial Mobiliaztion Piane）的平面应变中主应力公式之间的关系式。对平面应变条件下的条形地基进行了有限元数值模拟,计算结果验证了所推导的平面应变条件下M-C材料屈服时的中主应力公式的正确性,其公式为岩土体的强度和变形分析、中主应力的强度效应的进一步研究,以及Mohr-Coulomb准则的修正提供了有力的基础。     

水处理中SMP和EPS生成机理的数学模型建立及仿真

根据质量守恒原理提出了一个新的解释膜生物反应器中的可溶性微生物(SMP)和胞外聚合物(EPS)生成机理的数学模型。该模型结构简单,仅有底物、活性污泥、SMP和EPS四个组分,且参数确定的工作量较小。通过实验验证可知该模型能正确地模拟出膜生物反应器中的污泥生长和SMP形成的生物反应过程。     

An SMP critical state model for methane hydrate‐bearing sands

Mechanical properties of methane hydrate‐bearing soils are complex. Their behavior undergoes a significant change when hydrates dissociate and become methane gas. On the other hand, methane hydrates are ice‐like compounds and, depending on the hydrate accumulation habits and the degree of hydrate saturation, may cement soil particles into stronger and stiffer soils. A new constitutive model is proposed that is capable of capturing essential characteristics of hydrate‐bearing soils. The core of the model includes the spatial mobilized plane concept; a transformed stress, t_ij; the critical state; and the subloading framework. The proposed model gives soil responses due to stress changes or hydrate saturation changes or both. The performance of the model has been found satisfactory, over a range of hydrate saturation and confining pressures, using triaxial test data from laboratory‐synthesized samples and from field samples extracted from Nankai Trough, Japan. Copyright © 2015 John Wiley & Sons, Ltd.