试论质量体系有效性的保持

提出了保持质量体系有效运行的前提和基础 ,关键和保证措施 ,并指出了组织企业保持质量体系持续有效的方法和途径。     

GPS网络RTK的质量控制

随着科技的发展与工程应用的深入,传统RTK技术的不足也逐渐体现出来。网络RTK的出现克服了它的局限性。本文简要介绍了网络RTK的概念、工作原理、误差来源与平差、质量控制方法。     

以铜山测区为例谈大比例尺航测数字化成图质量控制

为了适应城市发展的需要,全数字摄影测量系统获取城市基础地理信息是目前大比例尺城市测绘的主要手段,如何保证航测法获取基础测绘数字产品的质量尤为重要。结合生产实践,阐明了进行大比例尺航测数字化地形图生产的质量控制及质量检查中应注意的细节问题。     

工程项目质量策划的理解与应用

本文介绍了项目质量管理的特点及构成要素,重点阐述了项目质量管理在施工企业应用的措施,以保证产品质量,为企业创出更高的效益。     

The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.     

人工神经网络在天津市区地面沉降预测中的应用

在分析天津市区地面沉降特点的基础上，结合人工神经网络原理，选择1961-1980年的天津市区降水量、地下水开采量、前年沉降量、固结度作为训练样本的输入量，以这20年的地面沉降量作为输出量，用贝叶斯正则化算法训练BP网络，得到沉降的仿真模型。并把1981-1993年的资料用来进行预测检验，结果表明这是一种比较理想的地面沉降预测方法。最后在不同的降水量保证率下，预测了到2010年天津市区地面沉降的情况。     

G-Probe-1 - An International Proficiency Test for Microprobe Laboratories - Report on Round 1 : February 2002 (TB-1 Basaltic Glass)

Results are presented for round one of a new international proficiency testing programme designed for microprobe laboratories involved in the routine analysis of silicate minerals. The sample used for this round was TB-1, a basaltic glass fused and prepared by the USGS. Thirty nine laboratories contributed data to this round, the majority of major element results being undertaken by EPMA and the majority of trace elements by LA-ICP-MS. Assigned values were derived from the median of results produced by nine selected laboratories that analysed powdered material by conventional ICP-MS, INAA and XRF techniques using bulk powders of the sample. Submitted microprobe results were evaluated using a target precision calculated using the Horwitz function, adopting the same criteria as those used for "applied" geochemistry laboratories in the companion GeoPT proficiency testing programme for laboratories involved in the routine bulk analysis of silicate rocks. An evaluation of results from participating microprobe laboratories indicated that overall, data were compatible with this precision function. A comparison between the performance of bulk and microprobe techniques used in the analysis of the basaltic glass showed remarkably good agreement, with significant bias only observed for the major oxide MgO.     

科技期刊发展的挑战与机遇

中国加入世贸组织后 ,面对开放的世界性大市场的直接冲击 ,我国出版发行行业的竞争必将更加激烈。优胜劣汰 ,会直接考验每个出版社、每份期刊。为了使我国的期刊在竞争中成为胜者 ,探讨了科技期刊参与竞争的困难与优势 ,提出了如何提高我国科技期刊竞争力的粗浅看法     

Determining Q of near-surface materials from Rayleigh waves

High-frequency (≥2 Hz) Rayleigh wave phase velocities can be inverted to shear (S)-wave velocities for a layered earth model up to 30 m below the ground surface in many settings. Given S-wave velocity (V_S), compressional (P)-wave velocity (V_P), and Rayleigh wave phase velocities, it is feasible to solve for P-wave quality factor Q_P and S-wave quality factor Q_S in a layered earth model by inverting Rayleigh wave attenuation coefficients. Model results demonstrate the plausibility of inverting Q_S from Rayleigh wave attenuation coefficients. Contributions to the Rayleigh wave attenuation coefficients from Q_P cannot be ignored when Vs/V_P reaches 0.45, which is not uncommon in near-surface settings. It is possible to invert Q_P from Rayleigh wave attenuation coefficients in some geological setting, a concept that differs from the common perception that Rayleigh wave attenuation coefficients are always far less sensitive to Q_P than to Q_S. Sixty-channel surface wave data were acquired in an Arizona desert. For a 10-layer model with a thickness of over 20 m, the data were first inverted to obtain S-wave velocities by the multichannel analysis of surface waves (MASW) method and then quality factors were determined by inverting attenuation coefficients.     

双多普勒雷达风场反演误差和资料的质量控制

提出了用双多普勒雷达观测资料进行回波强度、径向速度和方位定位的质量控制方法，以及利用概率分布法订正配对的双多普勒雷达回波强度的方法。以2001年973“中国暴雨”外场试验期间获取的双多普勒雷达观测资料为例，比较了合肥、马鞍山和宜昌、荆州的两对双多普勒雷达同步观测的回波强度、径向速度和方位的改变对观测数据对比的影响；分析了这两对双多普勒雷达径向速度测量误差引起的风场反演的误差。结果表明:两对双多普勒雷达观测的回波强度和径向速度的空间位置和变化趋势比较一致，合肥与马鞍山雷达的回波强度有一定差异，径向速度也有1～2 m/s的差异。风场反演的误差与风场的方向、大小、空间位置等有关。在两个径向速度夹角在40°～140°范围内，共面上的风场的反演误差在1～2倍的雷达探测径向速度的误差范围内。