Numerical manifold method for dynamic nonlinear analysis of saturated porous media

It is well known that the Babuska–Brezzi stability criterion or the Zienkiewicz–Taylor patch test precludes the use of the finite elements with the same low order of interpolation for displacement and pore pressure in the nearly incompressible and undrained cases, unless some stabilization techniques are introduced for dynamic analysis of saturated porous medium where coupling occurs between the displacement of solid skeleton and pore pressure. The numerical manifold method (NMM), where the interpolation of displacement and pressure can be determined independently in an element for the solution of u–p formulation, is derived based on triangular mesh for the requirement of high accurate calculations from practical applications in the dynamic analysis of saturated porous materials. The matrices of equilibrium equations for the second‐order displacement and the first‐order pressure manifold method are given in detail for program coding. By close comparison with widely used finite element method, the NMM presents good stability for the coupling problems, particularly in the nearly incompressible and undrained cases. Numerical examples are given to illustrate the validity and stability of the manifold element developed. Copyright © 2006 John Wiley & Sons, Ltd.     

Restricted Three-Body Problem: An Approximation of its General Solution – Part One – the Manifold of Symmetric Periodic Solutions

This paper gives the results of a programme attempting to exploit ‘la seule bréche’ (Poincaré, 1892, p. 82) of non-integrable systems, namely to develop an approximate general solution for the three out of its four component-solutions of the planar restricted three-body problem. This is accomplished by computing a large number of families of ‘solutions précieuses’ (periodic solutions) covering densely the space of initial conditions of this problem. More specifically, we calculated numerically and only for μ = 0.4, all families of symmetric periodic solutions (1st component of the general solution) existing in the domain D:(x ₀ ∊ [−2,2],C ∊ [−2,5]) of the (x ₀, C) space and consisting of symmetric solutions re-entering after 1 up to 50 revolutions (see graph in Fig. 4). Then we tested the parts of the domain D that is void of such families and established that they belong to the category of escape motions (2nd component of the general solution). The approximation of the 3rd component (asymmetric solutions) we shall present in a future publication. The 4th component of the general solution of the problem, namely the one consisting of the bounded non-periodic solutions, is considered as approximated by those of the 1st or the 2nd component on account of the `Last Geometric Theorem of Poincaré' (Birkhoff, 1913). The results obtained provoked interest to repeat the same work inside the larger closed domain D:(x ₀ ∊ [−6,2], C ∊ [−5,5]) and the results are presented in Fig. 15. A test run of the programme developed led to reproduction of the results presented by Hénon (1965) with better accuracy and many additional families not included in the sited paper. Pointer directions construed from the main body of results led to the definition of useful concepts of the basic family of order n, n = 1, 2,… and the completeness criterion of the solution inside a compact sub-domain of the (x ₀, C) space. The same results inspired the ‘partition theorem’, which conjectures the possibility of partitioning an initial conditions domain D into a finite set of sub-domains D i that fulfill the completeness criterion and allow complete approximation of the general solution of this problem by computing a relatively small number of family curves. The numerical results of this project include a large number of families that were computed in detail covering their natural termination, the morphology, and stability of their member solutions. Zooming into sub-domains of D permitted clear presentation of the families of symmetric solutions contained in them. Such zooming was made for various values of the parameter N, which defines the re-entrance revolutions number, which was selected to be from 50 to 500. The areas generating escape solutions have being investigated. In Appendix A we present families of symmetric solutions terminating at asymptotic solutions, and in Appendix B the morphology of large period symmetric solutions though examples of orbits that re-enter after from 8 to 500 revolutions. The paper concludes that approximations of the general solution of the planar restricted problem is possible and presents such approximations, only for some sub-domains that fulfill the completeness criterion, on the basis of sufficiently large number of families.     

A response‐based decoupling criterion for multiply‐supported secondary systems

It is often infeasible to carry out coupled analyses of multiply‐supported secondary systems for earthquake excitations. ‘Approximate’ decoupled analyses are then resorted to, unless the response errors due to those are significantly high. This study proposes a decoupling criterion to identify such cases where these errors are likely to be larger than an acceptable level. The proposed criterion is based on the errors in the primary system response due to decoupling and has been obtained by assuming (i) the input excitation to be an ideal white noise process, (ii) cross‐modal correlation to be negligible, and (iii) the combined system to be classically damped. It uses the modal properties of the undamped combined system, and therefore, a perturbation approach has been formulated to determine the combined system properties in case of light to moderately heavy secondary systems. A numerical study has been carried out to illustrate the accuracy achieved with the proposed perturbation formulation. The proposed decoupling criterion has been validated with the help of two example primary‐secondary systems and four example excitation processes. Copyright © 2002 John Wiley & Sons, Ltd.     

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.     

小浪底工程岩体力学参数研究

本文系统研究了小浪底工程的岩体的强度特征,采用了室内试验,野外结构面统计,工程地质类比法、模型试验法和Hoek Brown的经验法,估算了工程岩体的力学指标,指出了上述各种方法中所存在的不足,认为在工程实践中,应尽可能使用多种估计方法,交叉校核所得参数,以提高参数的可靠性,保证工程的安全,节约投资。     

区域滑坡泥石流灾害预警理论与方法研究

根据数年来的调查观测研究和工作实践,提出了滑坡泥石流灾害的预警分类体系,包括按物理参量划分的空间、时间与强度预警和按诱发因素参量划分的气象、地震与人类活动预警以及多参数、多因素共同作用下的综合预警。初步创建了区域性滑坡泥石流灾害暴发的两种预警理论方法,一种是基于临界过程降雨量判据图的预警方法;另一种是基于GIS的地质环境空间分析预警理论方法,通过计算预警区的滑坡泥石流灾害"发育度"、"潜势度"、"危险度"和"危害度"来实现。阐述了滑坡泥石流灾害预警的技术和行政工作程序,指出建立临界过程降雨量判据与地质环境空间分析相耦合的滑坡泥石流灾害预警理论方法是研究的新方向。     

双剪统一强度准则改进及其在岩土工程中的应用

在分析Mohr-Coulomb强度准则和双剪统一强度准则的基础上,提出了主剪面应力对和主剪面应力对的作用这2个新概念,并以此为出发点,通过考虑十二面体单元主剪面上所有3个主剪面应力对的共同作用,在双剪强度准则的基础上提出了一个新准则,并对其作了极限线分析.应用该新强度准则研究了静水压力条件下圆形巷道围岩弹塑性分析和土压力计算问题.研究表明,该准则不仅能较好地非线性反映岩土的3个基本强度特征,还解决了双剪统一准则中存在的双重破坏角问题.     

基于残余强度修正的岩石损伤软化统计本构模型研究

岩石随着围压的增大,残余强度的增加幅度比峰值强度大,残余强度逐渐成为影响岩石全应力-应变曲线峰后段的主要因素,因此,建立岩石损伤软化统计本构模型时,对残余强度进行修正是非常必要的。基于岩石应变强度理论以及岩石微元强度服从Weibull随机分布的假设,考虑岩石峰后残余强度对损伤变量进行修正,在微元破坏符合Hoek-Brown屈服准则条件下,建立了能够反映岩石峰后软化特征的三维损伤统计本构模型;依据岩石试验全应力-应变曲线的几何特征,推导出本构模型参数的数学表达式,并基于花岗岩室内试验数据对模型参数进行探讨,研究了Weibull分布参数与本构模型的关系,探讨了损伤修正系数的取值和岩石累积损伤的扩展过程;将建立的本构模型理论曲线与4种岩石（斑状二长花岗岩、细晶大理岩、砂岩和粉砂质泥岩）不同围压下的常规三轴压缩试验曲线进行对比分析,结果表明,该模型能很好地描述岩石破裂过程的全应力-应变关系和表征岩石残余强度特征。这对于岩石损伤软化问题以及岩石加固处理措施的研究均具有重要的意义。