闽南-台湾浅滩渔场浮游软体动物的分布

本文分析了1987年12月至1988年11月在闽南-台湾浅滩渔场6个航次采集的浮游软体动物,初步鉴定44种,以马蹄(?)螺、棒笔帽螺、尖笔帽螺和蝴蝶螺为该海区的优势种。本文研究了它们的季节变化,平面分布和垂直分布,并讨论了它们与上升流及其他水系的关系。     

光诱鱿鱼浮拖网渔具渔法试验报告

1989－1999年开展光诱鱿鱼浮拖网渔具渔法研究的生产试验结果为：1998年生产试验86个夜（航次），总产量33．225t，其中鱿鱼产量为12．470t，占总产量的37．5％，总产值139000元，比同村光诱敷网的平均产量（31．62t）高5．1％左右。1999年生产试验80夜（航次），总产量54．66t，其中鱿鱼产量31．92t，占总产量的58．4％，总产值187000元。试验网产量比同村光诱敷网的平均产量（45．64t)增产19．76％，产值增加22．65％，鱿鱼产量占总渔获量的比例提高近10个百分点，投入产出比为1：1．684。取得了较好的试验结果，达到了预期试验目的。此外，文中还讨论了水上灯数量，网具规格和柔性网板等对生产效果和捕捞对象的影响及适应性情况，并建议开展光场强度及其分布的海上实测和光场强度对鱿鱼，趋光性鱼类的行为习性以及生长影响等试验研究，制定出光诱鱿鱼浮报网和敷网作业诱鱼灯数量和分布标准，以合理利用鱿鱼和中上层鱼类资源，实现可持续发展。     

Effects of suction-dredging for cockles on non-target fauna in the Wadden Sea

Suction dredging for cockles removes large cockles from tidal flats and may also cause mortality of non-target fauna and make the habitat less suitable for some species. This study examines whether suction dredging for cockles on tidal flats of the Dutch Wadden Sea had affected densities of non-target fauna, directly after fishing and one year later. Densities of non-target fauna in two randomly chosen undredged locations were compared to densities at the surrounding heavily commercially dredged area. A significant negative effect of cockle dredging on densities of 0-group Macoma balthica was observed and this effect persisted one year after dredging. The dredged area appeared to be less suitable for settlement of mussels Mytilus edulis. No significant effects of dredging on the mudsnail Hydrobia ulvae and on 0 and 1-group C. edule were found. For the mobile young Macoma balthica it seems unlikely that the effect found after one year was still due to the mortality caused by dredging and this suggests that the habitat was less suitable as a consequence of dredging. Thus, even in the highly dynamic ecosystem of the Wadden Sea, effects of bottom disturbance by cockle dredging may persist after one year.     

Reducing fishing vessel fuel consumption and NOX emissions

There is a growing concern with the impact of marine operations on the environment. This requires reducing fuel consumption and vessel pollution during operation. On-board computers and satellite communications will enable the operator to reduce fuel consumption and NO_X emissions during vessel operations.This paper presents the results of a study on this problem and how such an on-board system could be implemented to reduce fuel consumption and engine NO_X emissions.     

Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current

The aim of this paper is to investigate the shape and tension distribution of fishing nets in current. A numerical model is developed, based on lumped mass method to simplify the net. The motion equation is set up for each lumped mass. The Runge–Kutta–Verner fifth-order and sixth-order method is used to solve these simultaneous equations, and then the displacement and tension of each lumped mass are obtained. In order to verify the validity of the numerical method, model tests have been carried out. The results by the numerical simulation agree well with the experimental data.     

动力定位系统与单波束测深仪在科考船定点作业中的应用

科考船定点作业时会受到海洋风、涌、浪、流等外界环境因素影响，导致工作效率降低，原位测量精度下降，甚至影响作业安全。动力定位系统 （DP） 具有自动定位功能，能够抵抗外界环境因素的影响，可实现科考船高精度定点控位。 单波束测深仪不仅可以测量水深，也可反映水下设备深度信息，可以起到辅助监控水下设备功能。本文在介绍定点作业施工现状与局限性的基础上，分析 DP 系统与单波束测深仪工作原理，以“向阳红 01”船为载体，在定点作业时开启 DP 系统与单波束测深仪，发现该方法可以提高科考船定点作业工作效率、原位测量精度并保障作业安全，可为其他科考船定点作业提供参考。     

浙江渔场的渔业资源动态与监测

本文根据历史资料和１９９３年资源动态监资料，阐明了浙江渔场及邻近海域渔业资源的变化状况，重点叙述了鲐、Ｃｈａｎ鱼、虾类、头足类的资源开发利用动态，讨论了渔业资源动态监测工作，提出今后搞好资源监测工作的建议。     

东白令海的刺黄盖鲽渔场海洋学与渔业生物学特征

本文概述了东白令海形成刺黄盖鲽渔场的海洋学特征,并结合现场调查的标样侧重分析了刺黄盖鲽的渔业生物学特征,本文还概略地讨论了该鱼与渔业资源的关系。     

Seakeeping assessment of fishing vessels in conceptual design stage

The main idea of this paper is to identify functional relations between seakeeping characteristics and hull form parameters of Mediterranean fishing vessels. Multiple regression analysis is used for quantitative assessment through a computer software that is based on the SQL Server Database. The seakeeping attributes under investigation are the transfer functions of heave and pitch motions and of absolute vertical acceleration at stern, while the ship parameters influencing motion dynamics have been classified into two groups: displacement (Δ) and main dimensions (L, B, T), coefficients that define the details of the hull form (C_WP, C_VP, LCB, LCF, etc.).Four multiple regression models having different parameter combinations are here investigated and discussed, giving way to the so-called ‘Simple Model’, ‘Intermediate Model’, ‘Enhanced 1 Model’ and ‘Enhanced 2 Model’. The obtained results are more than satisfactory for seakeeping predictions during the conceptual design stage.