Experimental study of strong reflection of regular water waves over submerged breakwaters in tandem

A series of laboratory experiments was carried out to investigate the strong reflection of regular water waves over a train of submerged breakwaters. Rectangular and trapezoidal shapes of submerged breakwaters are employed and compared for reflecting capability of incident waves. Measured reflection coefficients of regular waves over impermeable submerged breakwaters are verified by comparing with those of the eigenfunction expansion method. A very good agreement is observed. Reflection coefficients of permeable submerged breakwaters are less than those of impermeable breakwaters. The trapezoidal shape is recommended for a submerged breakwater in terms of reflecting capability and practical application.     

A three-dimensional wave field over a bidirectionally periodic ripple bottom

For gravity wave trains propagating over an arbitrary wavy bottom, a perturbation expansion is developed to the second order so that the Bragg resonance effect of the ripple bottom on the free-surface wave can be analyzed. Both the resonant and non-resonant cases are treated and the singular behavior at resonance is avoided. This theory is successfully verified by reducing to simpler situations. Then, the analytical results for the special case of a unidirectional sinusoidal bottom are compared with experimental data for validation.     

Bragg resonant reflection of carrier waves composing wave groups

Numerical analyses for the Bragg resonant reflection of carrier waves associated long waves due to sinusoidally varying seabeds are performed by using a set of coupled ordinary differential equations derived from the Boussinesq equations. The Boussinesq equations are firstly approximated with the Fourier decomposition. The coupled governing equations are then derived and used to simulate evolution of both short and long wave components. It is also found that wave groups are generated by two carrier waves with slightly different frequencies. The wave energy of the initial wave components is transferred to other harmonic components during propagation over a long distance. Evolution and reflection of both short and long waves were largely affected by nonlinearity.     

考虑轴向变形、双轴弯曲耦合效应的钢筋混凝土柱的弹塑性分析

在实际地震作用下，高层，特别是高宽比较大的高层结构中，由于倾覆力矩的作用、柱子、特别是外边柱所受轴力的变化将不可忽略。轴向变形与双轴弯曲的耦合作用，将是柱子塑性变形的显著特征。基于材料本构关系的“纤维模型”，能较精确地反映轴向变形，双轴弯曲三者之间的耦合作用。一组钢筋混凝土柱子双轴压弯的计算结果与试验结果的比较，证明了“纤维模型”的有效性和精确性。     

Comparison of llama fiber obtained from two production regions of Argentina

The Puna is an arid region running along the Andes mountains, more than 3600 m above sea level. Overgrazing has severely degraded much of this ecosystem, and this has dramatically reduced agricultural production and resulted in poverty for human inhabitants. Llamas are native to the Puna and are well suited to live there. Their grazing habits and digestive system make efficient use of native forages, and their padded feet keep soil disturbance to a minimum, thereby reducing erosion. Uncontrolled llama breeding over the last 500 years has degraded the quality of the fiber they produce, so today it is generally of low quality. Analysis of llama fibers obtained from two production regions of Argentina showed that some llamas possess sufficiently fine mean fiber diameters (less than 23 μm if guard hairs are excluded) to allow their fleeces to be sold at a premium. A higher price would make llamas more attractive to raise than the goats and sheep commonly found in the Puna today. Switching to llama production would increase grower income and sustainability of agriculture in the region.     

Material selection for the gas containment system of a compressed natural gas carrier fleet

In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships.     

Bragg reflection of water waves by multiple floating horizontal flexible membranes with submerged rectangular bars on the seabed

Bragg reflection of water waves by multiple floating horizontal flexible membranes is investigated based on the linear wave theory and the assumption of small membrane response. Under the floating horizontal membranes, periodical submerged rectangular bars are arranged on the flat seabed. The total reflection and transmission coefficients are obtained by using the eigenfunction expansion method and the wide spacing approximation. The calculated coefficients are validated with the results available in the literature, which shows that the present method is applicable. The characteristics of Bragg reflection are systematically investigated by changing various parameters including the height of the rectangular bars, the number, the tension, the spacing, and the length of the flexible membranes. The results can help designing multiple floating horizontal flexible membranes as effective floating breakwaters by taking advantage of Bragg reflection.     

海绵骨针特性及其仿生学研究

海绵是生长在海洋或淡水环境中的一种最简单的多细胞生物,3个主要海绵纲中有2个纲的海绵其主要骨架与支撑是玻璃纤维状的硅质骨针。近年来,人们发现了硅质海绵骨针独特的微结构及良好的光纤特性,特别是指出了这些特性给人类带来制造光纤的新思路,并很快引起了科学家对其结构、特性、生长机制与调控的生物学、生矿物学和仿生学的广泛研究兴趣。评述了海绵骨针内部结构和光学特性的发现、海绵骨针研究的热点领域及研究意义,并简要介绍了海绵骨针的国内外研究概况及主要工作。     

Velocity potential formulations of highly accurate Boussinesq-type models

The highly accurate Boussinesq-type equations of Madsen et al. (Madsen, P.A., Bingham, H.B., Schäffer, H.A., 2003. Boussinesq-type formulations for fully nonlinear and extremely dispersive water waves: Derivation and analysis. Proc. R. Soc. Lond. A 459, 1075–1104; Madsen, P.A., Fuhrman, D.R., Wang, B., 2006. A Boussinesq-type method for fully nonlinear waves interacting with a rapidly varying bathymetry. Coast. Eng. 53, 487–504); Jamois et al. (Jamois, E., Fuhrman, D.R., Bingham, H.B., Molin, B., 2006. Wave-structure interactions and nonlinear wave processes on the weather side of reflective structures. Coast. Eng. 53, 929–945) are re-derived in a more general framework which establishes the correct relationship between the model in a velocity formulation and a velocity potential formulation. Although most work with this model has used the velocity formulation, the potential formulation is of interest because it reduces the computational effort by approximately a factor of two and facilitates a coupling to other potential flow solvers. A new shoaling enhancement operator is introduced to derive new models (in both formulations) with a velocity profile which is always consistent with the kinematic bottom boundary condition. The true behaviour of the velocity potential formulation with respect to linear shoaling is given for the first time, correcting errors made by Jamois et al. (Jamois, E., Fuhrman, D.R., Bingham, H.B., Molin, B., 2006. Wave-structure interactions and nonlinear wave processes on the weather side of reflective structures. Coast. Eng. 53, 929–945). An exact infinite series solution for the potential is obtained via a Taylor expansion about an arbitrary vertical position z = zˆ. For practical implementation however, the solution is expanded based on a slow variation of zˆ and terms are retained to first-order. With shoaling enhancement, the new models obtain a comparable accuracy in linear shoaling to the original velocity formulation. General consistency relations are also derived which are convenient for verifying that the differential operators satisfy a potential flow and/or conserve mass up to the order of truncation of the model. The performance of the new formulation is validated using computations of linear and nonlinear shoaling problems. The behaviour on a rapidly varying bathymetry is also checked using linear wave reflection from a shelf and Bragg scattering from an undulating bottom. Although the new models perform equally well for Bragg scattering they fail earlier than the existing model for reflection/transmission problems in very deep water.     

光电式互感器的研究和发展及其在电力系统中的应用

在电力系统中，光学传感器较之传统的电气传感器具有本质上的优越性。叙述了近年来电流互感器（OCT）、光学电压互感器（OVT）在实际电力系统中的应用方面的研究及发展，详细总结了从110kV三相OCT到500k V组合式光学电流电压测量系统（OMU）等实际项目的研究工作。对光学电流互感器的一些新型设计进行了探讨，并展望了应用于电站的基于光纤传感、光纤监控、光纤通信及光纤继电保护的光纤局域网。