High resolution paleoenvironmental and chronological investigations of Norse landnám at Tasiusaq, Eastern Settlement, Greenland

High-resolution paleoenvironmental data from a peat profile with a small pollen source area are used to reconstruct the impacts of landnám on vegetation and soils at a Norse farm complex (∅2 at Tasiusaq) comprising two farms in the Eastern Settlement of Greenland. Analyses include the AMS ¹⁴C dating of plant macrofossil samples and the use of Bayesian radiocarbon calibration to construct improved age-depth models for Norse cultural horizons. The onset of a regional landnám may be indicated by the clearance of Betula pubescens woodland immediately prior to local settlement. The latter is dated to AD 950-1020 (2σ) and is characterised by possible burning of Betula glandulosa scrub to provide grassland pasture for domestic stock. Clearance and grazing resulted in accelerated levels of soil erosion at a westerly farm. This was followed by an easterly migration of settlement and agriculture. Site constraints prevent an assessment of the demise of the easterly farm, but pressures of overgrazing and land degradation may have been the major factors responsible for the abandonment of the earlier farm.     

A New Probability of Detection Model for Updating Crack Distribution of Offshore Structures

1 .IntroductionNondestructiveinspection (NDI)isveryimportantforensuringthereliabilityofoffshorestructuresintheirservicelives (Lauraetal.,1 996 ) .Itiswellknownthatdetectionofflawsinvolvesconsider ablestatisticaluncertainties.Asaresult,theprobabilityofdetection (POD)forallflawsofagivensizehasbeenusedintheliteraturetodefinethecapabilityofaparticularNDItechniqueinagivenen vironment.SincethedataofPODusuallyscatterlargely ,itisdifficulttodeterminewhichmodelfitstheavailabledatabest.Thismodelun…     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Mooring optimization of floating platforms using a genetic algorithm

This paper presents a new procedure for the optimization of the mooring design of floating platforms, in which an automatic design sequence is also established. Regarding the optimization philosophy, the following aspects are dealt with:

• The optimization of the platform heading and its mooring pattern, taking into account the environmental force spreading;

• optimum line length or line tension for each mooring line, associated to the optimization of the mooring line materials and sizes.

Basically, the main goal of this paper is to introduce a new method, which will provide the quickest way to find the best mooring system, defined here as that which minimizes platform responses.A genetic algorithm (GA) is applied in this contribution, and this paper describes exactly the procedure of developing a GA code directed toward the solution of mooring design optimization problems. In order to prove the efficiency and the vast potential of the proposed algorithm as a design tool, sample moorings are analyzed for different environmental conditions and the final results, including the time required to run them, are presented.     

气溶胶光学厚度的时空变化

在大气中气溶胶微粒是一种重要的大气微量成分。气溶胶光学厚度也是大气校正所需的重要大气参数，同时也是海洋水色卫星主要的数据产品。由于气溶胶光学厚度的时空变化较大，所以如何准确获取大气校正和卫星数据产品真实性检验所需的气溶胶光学厚度则是至关重要的。在简述气溶胶光学性质的基础上，并结合2002年6月HY—1南海实验数据来阐述现场气溶胶光学厚度的准确获取。     

Hydrodynamic optimization of ship hull forms

An extremely simple CFD tool is used to compare the calm-water drags of a series of hull forms and to define ‘optimized’ monohull ships for which the total (friction+wave) calm-water drag is minimized. The friction drag is estimated using the classical ITTC formula. The wave drag is predicted using the zeroth-order slender-ship approximation. Comparisons of theoretical predictions and experimental measurements for a series of eight hull forms show that—despite the extreme simplicity of the method that is used here to estimate the friction drag and the wave drag—the method is able to rank the drags of a series of hull forms roughly in accordance with experimental measurements. Thus, the method may be used, with appropriate caution, as a practical hull form design and optimization tool. For purposes of illustration, optimized hull forms that have the same displacement and waterplane transverse moment of inertia as the classical Wigley hull, taken as initial hull in the optimization process, are determined for three speeds and for a speed range.     

Reconstruction of sea surface dimethylsulfide in the North Pacific during 1970s to 2000s

We proposed an empirical equation of sea surface dimethylsulfide (DMS, nM) using sea surface temperature (SST, K), sea surface nitrate (SSN, μM) and latitude (L, °N) to reconstruct the sea surface flux of DMS over the North Pacific between 25°N and 55°N: ln DMS = 0.06346 · SST − 0.1210 · SSN − 14.11 · cos(L) − 6.278 (R² = 0.63, p < 0.0001). Applying our algorithm to climatological hydrographic data in the North Pacific, we reconstructed the climatological distributions of DMS and its flux between 25 °N and 55 °N. DMS generally increased eastward and northward, and DMS in the northeastern region became to 2–5 times as large as that in the southwestern region. DMS in the later half of the year was 2–4 times as large as that in the first half of the year. Moreover, applying our algorithm to hydrographic time series datasets in the western North Pacific from 1971 to 2000, we found that DMS in the last three decades has shown linear increasing trends of 0.03 ± 0.01 nM year^− 1 in the subpolar region, and 0.01 ± 0.001 nM year^− 1 in the subtropical region, indicating that the annual flux of DMS from sea to air has increased by 1.9–4.8 μmol m^− 2 year^− 1. The linear increase was consistent with the annual rate of increase of 1% of the climatological averaged flux in the western North Pacific in the last three decades.     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.