HCN fluorescence on Titan

The HCN emission features near 3 μm recently detected by Geballe et al. (2003, Astrophys. J. 583, L39) are analyzed with a model for fluorescence of sunlight in the ν₃ band of HCN. The emission spectrum is consistent with current knowledge of the atmospheric temperature profile and the HCN distribution inferred from millimeter-wave observations. The spectrum is insensitive to the abundance of HCN in the thermosphere and the thousand-fold enhancement relative to photochemical models suggested by Geballe et al. (2003, Astrophys. J. 583, L39) is not required to explain the observations. We find that the spectrum can be matched with temperatures from 130 to 200 K, with slightly better fits at high temperature, contrary to the temperature determination of 130±10 K of Geballe et al. (2003, Astrophys. J. 583, L39). The HCN emission spectrum is sensitive to the collisional de-excitation probability, P₁₀, for the ν₃ state and we determine a value of 10⁻⁵ with an accuracy of about a factor of two. Analysis of absorption lines in the C₂H₂ν₃ band near 3 μm, detected in the same spectrum, indicate a C₂H₂ mole fraction near 0.01 μbar of 10⁻⁵ for P₁₀=10⁻⁴. The derived mole fraction, however, is dependent upon the value adopted for P₁₀ and lower values are required if P₁₀ at Titan temperatures is less than its room temperature value.     

Partial derivatives of surface wave phase velocities for flat anisotropic models

Summary. Surface wave behaviour in flat anisotropic structures is first illustrated by performing an exact computation on a simple two-layer model. The variational procedure of Smith & Dahlen is then used to compute the partial derivatives of surface wave phase velocities with respect to the elastic parameters in more realistic earth models. Linear relationships between the partial derivatives for a general anisotropic structure and those for a transversely isotropic structure are derived. When considering waves propagating in a fixed direction, there are only four independent derivatives for Rayleigh waves, and two for Love waves. To avoid the lack of resolution in an inverse method, we propose to use physically constrained models. These results are illustrated by using a model with hexagonal symmetry and a symmetry axis oriented either vertically or horizontally. Quasi-Love- and quasi-Rayleigh-wave partial derivatives are computed for both axis orientations. Modes up to the second overtone and periods ranging between 45 and 130 s have been considered. Finally, anomalies of phase velocity are computed in an oceanic model made of 1/6 oriented olivine crystals with horizontal or vertical preferred orientations of the a -axis.     

Inversion of multimode surface wave data: evidence for sub-lithospheric anisotropy

Summary. Multiparameter inversions of multimode dispersion data are performed for two large regions: the Pacific Ocean and North America. Anisotropy is taken into account by considering transversely isotropic structures with a vertical axis of symmetry. Two fundamental questions are studied in detail: (1) how to make the inverted models consistent when using different sets of parameters, (2) what is the significance of transversely isotropic inversion for the actual Earth's structure? It is proved that full consistency of the inverted models can be achieved by properly taking into account some a priori informations on the model and it is shown that the use of transversely isotropic models with vertical axis of symmetry does not cause severe limitations when interpreting the data. The models we have obtained are discussed in the light of these investigations. Considering an olivine-rich upper mantle, we make a tentative interpretation of these models in terms of preferred orientation of the a -axis of the crystals in one fixed horizontal direction.     

SANICLAY: simple anisotropic clay plasticity model

SANICLAY is a new simple anisotropic clay plasticity model that builds on a modification of an earlier model with an associated flow rule, in order to include simulations of softening response under undrained compression following K_o consolidation. Non‐associativity is introduced by adopting a yield surface different than the plastic potential surface. Besides, the isotropic hardening of the yield surface both surfaces evolve according to a combined distortional and rotational hardening rule, simulating the evolving anisotropy. Although built on the general premises of critical state soil mechanics, the model induces a critical state line in the void ratio–mean effective stress space, which is a function of anisotropy. To ease interpretation, the model formulation is presented firstly in the triaxial stress space and subsequently, its multiaxial generalization is developed systematically, in a form appropriate for implementation in numerical codes. The SANICLAY is shown to provide successful simulation of both undrained and drained rate‐independent behaviour of normally consolidated sensitive clays, and to a satisfactory degree of accuracy of overconsolidated clays. The new model requires merely three constants more than those of the modified Cam clay model, all of which are easily calibrated from well‐established laboratory tests following a meticulously presented procedure. Copyright © 2006 John Wiley & Sons, Ltd.     

Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.     

Analysis of drivers governing temporal salinity and temperature variations in groundwater discharge from Altug Submarine Karst Cave (Kas-Turkey)

Salinity and temperature variations in groundwater discharge from the Altug submarine karst cave have been observed at 28 m below sea level for every 10 min between November 2004 and August 2005 to determine the drivers that govern the salinization. Comparisons between temporal trends of salinity and temperature with those of precipitation, air pressure, sea level and wind velocity revealed an apparent dominance of precipitation regime on the salinity and temperature variations. Spectral analyses applied to observations showed that the air pressure and sea level oscillations are affected by sun and moon tides which do not have an appreciable impact on the salinity and temperature variations. Annual rate of salinization in Altug cave seems inversely related to the inland groundwater head so that the maximum and minimum fresh water contributions occur at mid-spring and late-summer, respectively.     

Vertical and seasonal differences in biogenic silica dissolution in natural seawater in Suruga Bay, Japan: Effects of temperature and organic matter

Vertical and seasonal characteristics of biogenic silica (BSi) dissolution in seawater were investigated by multiple dissolution experiments using seawater collected from surface and mesopelagic layers in Suruga Bay during the period 2002–2004. The dissolution rate coefficients calculated based on temporal changes of BSi concentration varied with the season of sample collection. They ranged from 0.023–0.057 day^− 1 for surface samples and 0.0018–0.0025 day^− 1 for mesopelagic samples for temperatures approaching in situ conditions. Experiments at various temperatures confirmed that BSi dissolution depends on temperature in natural seawater. Dissolution rate coefficient (day^− 1) of BSi correlated significantly with temperature (°C), and Q₁₀ was 2.6. Addition of bioavailable organic matter to low-bioactivity seawater enhanced the protease activity and abundance of bacteria, and increased BSi dissolution rate by a factor of 1.4–2.0. There is clear evidence that BSi dissolution is accelerated by bacterial activity and potentially limited by bioavailable organic matter in natural seawater. Dissolution rates and total decreases of BSi concentration were lower during experiments using mesopelagic samples than in those using surface samples. This suggests that dissolution of BSi varies with depth and that BSi in the mesopelagic water is more resistant to the dissolution than that in the surface water. This lower dissolution rate was caused by lower temperature and lower bacterial activity due to less bioavailable organic matter in mesopelagic water. Our results provide a mechanistic understanding of variations in silica cycling within the seasonally and vertically differing marine environment.