Dynamics of Two Planets in the 3/2 Mean-motion Resonance: Application to the Planetary System of the Pulsar PSR B1257+12

This paper considers the dynamics of two planets, as the planets B and C of the pulsar PSR B1257+12, near a 3/2 mean-motion resonance. A two-degrees-of-freedom model, in the framework of the general three-body planar problem, is used and the solutions are analyzed through surfaces of section and Fourier techniques in the full phase space of the system.On the possibility of existence of a fourth planet in distant orbit, see Wolszczan et al., 2000     

Estimation of hydraulic permeability considering the micro morphology of rocks of the borehole YAXCOPOIL-1 (Impact crater Chicxulub,Mexico)

Internal surface, formation factor, Nuclear Magnetic Resonance (NMR)-T2 relaxation times and pore radius distributions were measured on representative core samples for the estimation of hydraulic permeability. Permeability is estimated using various versions of the classic Kozeny–Carman-equation (K–C) and a further development of K–C, the fractal PaRiS-model, taking into account the internal surface. In addition to grain and pore size distribution, directly connected to permeability, internal surface reflects the internal structure (“micro morphology”). Lithologies could be grouped with respect to differences in internal surface. Most melt rich impact breccia lithologies exhibit large internal surfaces, while Tertiary post-impact sediments and Cretaceous lithologies in displaced megablocks display smaller internal surfaces. Investigations with scanning electron microscopy confirm the correlation between internal surface and micro morphology. In addition to different versions of K–C, estimations by means of NMR, pore radius distributions and some gas permeability measurements serve for cross-checking and calibration. In general, the different estimations from the independent methods and the measurements are in satisfactory accordance. For Tertiary limestones and Suevites bulk with very high porosities (up to 35%) permeabilites between 10⁻¹⁴ and 10⁻¹⁶ m² are found, whereas in lower Suevite, Cretaceous anhydrites and dolomites, bulk permeabilites are between 10⁻¹⁵ and 10⁻²³ m².     

Lichen-dominated soil crusts as arthropod habitat in warm deserts

Soil crust lichens can be the dominant vegetation in arid lands, yet their importance as habitat to secondary producers is relatively unknown. This study examines the distribution of arthropod communities in the northern Namib Desert to evaluate whether a lichen-rich area is more or less productive than adjacent habitats in terms of the consumers each supports. Arthropods are diverse and highly endemic in the Namib Desert and lichens dominate this desert's extensive gravel plains. We sampled lichen-rich, dwarf shrub, and unvegetated sites and found distinct arthropod assemblages in the lichen-dominated sites, including species unique to lichen sites. Arthropod assemblages in two of the lichen sites were similar to those found in the dwarf shrub site. In a canonical correspondence analysis, crustose lichens and overall lichen cover were key in driving the variance in arthropod assemblages within the lichen sites. Furthermore, lichen morphotypes, overall lichen cover and species richness, were significantly correlated with the representation of arthropod subgroups and arthropod species richness. These findings provide evidence that lichen-dominated soil crusts in the Namib Desert are important supporters of secondary production, warranting more in-depth studies into the ecology and conservation of this lichen-rich habitat in warm deserts.     

Interpretation of charging on fracture or frictional slip surface of rocks

Fracturing and frictional sliding of quartz and granite under dry condition generates fractoluminescence, charged particle emission and electromagnetic radiation. Various kinds of experiments indicate that surface charge density on fracture or frictional slip surface of quartz and granite is 10⁻⁴ to 10⁻² C/m² which is larger than bound charges induced by the disappearance of piezoelectricity due to the release of stress. Hole and electron trapping centers, which is found in semiconductor devices with the Si–SiO₂ system, are causes of surface charging on fracture or frictional slip surface of quartz crystal. The quantity of the surface charge is enough to cause corona discharge that can generate earthquake lights. The mechanism considering the hole and electron trapping centers has a probability to explain why non-piezoelectric minerals or rocks generate electromagnetic phenomena. It can be one of origins of seismo-electromagnetic phenomena (SEP).     

Determination of paleo-pressure for a natural gas pool formation based on PVT characteristics of fluid inclusions in reservoir rocks——A case study of Upper-Paleozoic deep basin gas trap of the Ordos Basin

~~Determination of paleo-pressure for a natural gas pool formation based on PVT characteristics of fluid inclusions in reservoir rocks——A case study of Upper-Paleozoic deep basin gas trap of the Ordos Basin~~     

The behavior of magneto-acoustic-gravity waves near the cusp resonance in a lossless,compressible, isothermal,stratified, electrically conducting and uniformly magnetized atmosphere. II: The valve effect

Abstract

In the present paper the behavior of (internal) magneto-acoustic-gravity waves near the cusp resonance in a lossless, compressible, isothermal, stratified, electrically conducting atmosphere that is permeated by a uniform, nearly horizontal magnetic field is re-addressed (Kamp, 1989). The previously analyzed linear conversion of long acoustic-gravity waves into short magneto-acoustic waves that carry off the energy from the resonance region along the magnetic field, is re-analyzed with boundary layer techniques that are based on the smallness of the vertical component of the magnetic field. More specifically the existence of the so-called valve effect for the generated magneto-acoustic mode near the critical level is explicitly demonstrated and shown to be governed by two rivalling effects.     

Interaction of flexural gravity waves with shear current in shallow water

In the present study, the effect of shear current on the propagation of flexural gravity waves is analyzed under the assumptions of linearized shallow-water theory. Explicit expressions for the reflection and transmission coefficients associated with flexural gravity wave scattering by a step discontinuity in both water depth and current speed are derived. Further, trapping and scattering of flexural gravity waves by a jet-like shear current with a top-hat profile are examined and certain limiting conditions for the waves to exist are derived. The effects of change in water depth, current speed, incident wavelength and the angle of incidence on the group and phase velocities as well as on the reflection and transmission characteristics are analyzed through different numerical results.     

Stable 85Rb micro vapour cells: fabrication based on anodic bonding and application in chip-scale atomic clocks

We describe the microfabrication of ⁸⁵Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions, the pure metallic Rb drops and buffer gases were obtained in the cells with a few mm³ internal volumes during the cell sealing process. At an ambient temperature of 90 ℃ the optical absorption resonance of ⁸⁵Rb D1 transition with proper broadening and the corresponding coherent population trapping (CPT) resonance, with a signal contrast of 1.5% and linewidth of about 1.7 kHz, have been detected. The sealing quality and the stability of the cells have also been demonstrated experimentally by using the helium leaking detection and the after-9-month optoelectronics measurement which shows a similar CPT signal as its original status. In addition, the physics package of chip-scale atomic clock (CSAC) based on the cell was realized. The measured frequency stability of the physics package can reach to 2.1×10^-10 at one second when the cell was heated to 100 ℃ which proved that the cell has the quality to be used in portable and battery-operated devices.     

Improvement of the axial trapping effect using azimuthally polarised trapping beam

A dual optical tweezers system, which consists of a doughnut mode optical tweezer (DMOT) with the azimuthally polarised trapping beam and a solid mode optical tweezer (SMOT) with the Gauss trapping beam was constructed to compare the axial trapping effect of DMOT and SMOT. The long-distance axial trapping of ST68 microbubbles (MBs) achieved by DMOT was more stable than that of SMOT. Moreover the axial trapping force measured using the viscous drag method, was depended on the diameter of the particle, the laser power, and the numerical aperture (NA) of the objective lens. The measurement of the axial trapping force and the acquisition of CCD images of trapping effect confirmed that the DMOT showed excellent axial trapping ability than SMOT. A simple and effective method is developed to improve axial trapping effect using the azimuthally polarized beam as trapping beam. This is helpful for the long-distance manipulating of particles especially polarised biological objects in axial direction.     

油气包裹体在油气地质研究中的应用--概念、分类、形成机制及研究意义

油气包裹体己成为油气成藏研究的有力工具,在划分油气运移充注期次、确定油气藏的形成时间、反映油气的成熟度及来源等方面均有重要的应用价值。近年来,利用油气包裹体及其共生的盐水溶液包裹体估算油气藏形成时的pVT条件是油气包裹体研究中的一个新热点,它为更准确地计算油气藏形成的温度一压力条件提供了一种独立的、更准确的技术手段。研究表明,包裹体岩相学和流体体系的热力学研究仍将是今后的发展重点。油气包裹体的pVT模拟技术尚处于初始阶段,两种软件（VTFlinc和FIT）的准确性和精确性虽有待进一步提高,但已经成为今后一个重要的发展方向。