Ultrahigh pressure macro diamonds from Copeton (New South Wales, Australia), based on Raman spectroscopy of inclusions

Mining of Cenozoic alluvial deposits at Copeton and Bingara (Eastern Australia) has produced two million macrodiamonds (0.25 ct median size). Raman spectroscopy is used to identify included minerals within uncut Copeton diamonds, with sealed chamber remnant pressures of 31.7 to 35.6 kbar for coesite, 13.6 and 22.7 kbar for clinopyroxene, and 7.6 kbar for grossular garnet. Assuming elastic behaviour, these values generate inclusion entrapment PT loci which intersect, restricting diamond formation conditions: from 250 °C, 43 kbar to 800 °C, 52 kbar. Larger than error (± 100 °C and ± 4 kbar), this range shows a systematic variation in inclusion composition with diamond zoning and N properties. Published research shows 1) Copeton and Bingara diamonds are unique, and 2) modern alluvium in the Bingara district carries mantle-formed garnet, captured by post-tectonic alkali basalt from an extensive diamondiferous ultrahigh pressure (UHP) terrane that stalled at depth because it is dominated by mafic eclogite. The combined Raman and geological results indicate two sets of subduction UHP diamond formation conditions/protolith are required, firstly cooler oceanic slab and secondly including higher temperature continental crust. The Copeton and Bingara stones are UHP macrodiamonds, and Carboniferous ⁴⁰Ar/³⁹Ar age dates on clinopyroxene inclusions should be interpreted as ages of crystallisation, representing the termination of subduction. The characteristic features of ruptured inclusions and etched percussion marks on Copeton and Bingara diamond indicate volcanic delivery to the earth's surface. Alluvial deposits elsewhere in Eastern Australia may carry similar diamond along with diamond of different origin.     

关于胶莱盆地东南缘基性火山熔岩喷发时代上限的讨论

首次对采自青岛即墨WN部两个深钻孔中新鲜玄武岩样品进行Rb-Sr同位素测年,测定年龄值为65.77±13.6Ma。认为该年龄值代表了胶莱盆地东南缘基性火山熔岩喷发的时代上限,对于整个胶莱盆地中基性火山岩的划分和对比具重要的年代学意义。     

A scanning electron microscope study of the effects of dynamic recrystallization on lattice preferred orientation in olivine

Effects of dynamic recrystallization on lattice preferred orientation (LPO) in olivine were investigated through the combination of two SEM-based techniques, electron backscattered diffraction (EBSD) technique for crystallographic orientation measurement and backscattered electron imaging (BEI) for dislocation observation. Samples are experimentally deformed olivine aggregates in simple shear geometry. In the sample deformed at T=1473 K and high stresses (480 MPa), only incipient dynamic recrystallization is observed along grain-boundaries. Orientations of these small recrystallized grains are more random than that of relict grains, suggesting an important role of grain-boundary sliding at this stage of recrystallization. In the sample deformed at T=1573 K and low stress (160 MPa), dynamic recrystallization is nearly complete and the LPO is characterized by two [100] peaks. One peak is located at the orientation subparallel to the shear direction and is dominated by grains with high Schmid factor. The other occurs at high angles to the shear direction and is due to the contribution from grains with low Schmid factor. Grains with high Schmid factor tend to have higher dislocation densities than those with low Schmid factor. Based on these observations, we identify two mechanisms by which dynamic recrystallization affects LPO: (1) enhancement of grain-boundary sliding due to grain-size reduction, leading to the modification of LPO caused by the relaxation of constraint for deformation; (2) grain-boundary migration by which grains with lower dislocation densities grow at the expense of grains with higher dislocation densities. Based on the deformation mechanism maps and stress versus recrystallized grain-size relation, we suggest that the first mechanism always plays an important role whereas the second mechanism has an important effect only under limited conditions.     

Spatial correlation of deformation and mineral reaction in experimentally deformed plagioclase–olivine aggregates

Shear deformation of hot pressed plagioclase–olivine aggregates was studied in the presence and absence of mineral reaction. Experiments were performed at 900 °C, 1500 MPa, and a constant shear strain rate of 5×10⁻⁵ s⁻¹ in a solid medium apparatus. Whether the mineral reaction between plagioclase and olivine takes place or not is controlled by choosing the appropriate plagioclase composition; labradorite (An₆₀) does not react, anorthite (An₉₂) does. Labradorite–olivine aggregates deformed without reaction are very strong and show strain hardening throughout the experiment. Syndeformational reaction between olivine and anorthite causes a pronounced strain weakening. The reaction produces fine-grained opx–cpx–spinel aggregates, which accommodate a large fraction of the finite strain. Deformation and reaction are localised within a 0.5-mm-wide sample. Three representative samples were analysed for their fabric anisotropy R* and shape-preferred orientation α* (fabric angle with the shear plane) using the autocorrelation function (ACF). Fabric anisotropy can be calibrated to quantify strain variations across the sheared samples. In the deformed and reacted anorthite–olivine aggregate, there is a strong correlation between reaction progress and strain; regions of large shear strain correspond to regions of maximum reaction progress. Within the sample, the derived strain rate variations range up to almost one order of magnitude.     

Frequency dependence of elastic wave speeds at high temperature: a direct experimental demonstration

At sufficiently high temperatures and/or long periods, the elastic behaviour of crystalline material gives way progressively to viscoelastic behaviour associated with the stress-induced migration of crystal defects. This transition is marked by the onset of appreciable strain energy dissipation accompanied by frequency dependence (dispersion) of the shear modulus and elastic wave speeds. Ultrasonic interferometry and torsional forced-oscillation techniques can be used to probe the low-amplitude stress-strain behaviour of fine-grained polycrystalline material in two very different frequency ranges, respectively 10-100 MHz and 1 mHz-1 Hz. Here we demonstrate and apply these two complementary methods in a study of the high-temperature mechanical behaviour of a fine-grained synthetic olivine polycrystal. At the high frequencies of ultrasonic interferometry, the shear wave speed varies linearly with temperature between room temperature and the highest experimentally accessible temperature (1300 °C) in close accord with expectations based on similarly high-frequency studies of the elastic behaviour of single-crystal olivine. However, at teleseismic frequencies (<1 Hz) and temperatures >900 °C, the shear wave speed becomes much more strongly temperature-sensitive reflecting markedly viscoelastic behaviour. Newly emerging laboratory-derived constraints on this viscoelastic enhancement of the temperature sensitivity of seismic wave speeds and its grain-size dependence will provide a more robust interpretation of seismological models for the variation of wave speeds and attenuation within the Earth's interior.     

岩石中的压力影形成的实验观测研究

野外地质观察发现,在大陆地壳变质岩中可以广泛观察到围绕一个大的单晶或者硬质点的两端区域填充低粘度相物质形成的压力影。为了定量研究岩石材料中压力影的形成条件,本文利用高精度Paterson气体介质变形装置,对含有刚性球的圣卡罗橄榄石和洋中脊玄武岩(MORB)的混合物圆柱型样品进行了高温高压扭转变形试验。变形实验前样品的初始熔融均匀分布,比例为φ≈0.05,变形试件尺寸为D8.9mm×L5.5mm,内含8粒直径约1mm的刚性球。扭转变形试验温度为1473K,围压为300MPa,应变率为γ≈1×10~(-4)s~(-1),最大剪切变形为γ≈4。实验结果表明,岩石受到扭转力的作用产生变形之后,当局部剪切应变达到γ≈1时,可以在刚性球周围形成熔融富集带和熔融贫乏带,即压力影构造,围绕刚性球对称分布。由于熔融分布的不均一性,富集带熔融比例上升,最高可以达到φ_(high)=0.1~0.3,熔融贫乏带熔融比例下降,含量为φ_(low)=0.01~0.02。由于刚性球对其周围的压力分布的扰动区域大约为刚性球的尺度范围,因此,在离开刚性球一定距离后,熔融趋于均匀分布。     

鲁北新生代隐伏火山岩及其石油地质意义

鲁北新生代隐伏火山岩可划分为3个喷发期6个亚期,9种火山岩岩石类型和同期侵入的辉绿岩。它们形成在近大陆边缘的板内裂谷型盆地,对于富有机质生油岩的沉积、各种储集体的形成、多种含油圈闭类型的形成以及有机质成熟向烃类转化都是非常有利的。作为储集岩主要有玄武安山岩、辉绿岩和湖底玄武质凝灰岩。储油空间主要为次生孔隙和裂缝。火山岩及其有关岩石在本区不仅形成了特殊的油气藏,而且还可作为盖层、封堵层、披复构造的基岩,因此对石油地质勘探有重要意义。     

Cryptic crustal contamination of MORB primitive melts recorded in olivine-hosted glass and mineral inclusions

The origin of compositional heterogeneities among the magmas parental to mid-ocean ridge basalts (MORB) was investigated using a single rock piece of the olivine-phyric basalt from 43°N, Mid-Atlantic Ridge (AII D11-177). The exceptional feature of this sample is presence of very primitive olivine crystals (90–91 mol% Fo) that are significantly variable in terms of CaO (0.15–0.35 wt%). A population of low-Ca olivine (0.15–0.25 wt% CaO) is also notably distinct from high-Ca olivine population in AII D11-177, and primitive MORB olivine in general, in having unusual assemblage of trapped mineral and glass inclusions. Mineral inclusions are represented by high-magnesian (Mg# 90.7–91.1 mol%) orthopyroxene and Cr-spinel, distinctly enriched in TiO₂ (up to 5 wt%, c.f. <1 wt% in common MORB spinel). Glass inclusions associated with orthopyroxene and high-Ti Cr-spinel have andesitic compositions (53–58 wt% SiO₂). Compared to the pillow-rim glass and “normal” MORB inclusions, the Si-rich glass inclusions in low-Ca olivine have strongly reduced Ca and elevated concentrations of Ti, Na, K, P, Cl, and highly incompatible trace elements. Strong variability is recorded among glass inclusions within a single olivine phenocrysts. We argue that the observed compositional anomalies are mineralogically controlled, and thus may arise from the interaction between hot MORB magmas and crystal cumulates in the oceanic crust or magma chamber.     

高温高压下橄榄石含水实验和软流圈成因

高温高压橄榄石含水实验表明，水进入橄榄石能加速其塑性形变，促进了地幔塑性流动，为上部软流圈成因提供一种新的可能依据。     

High-temperature creep in a Ni2GeO4: a contribution to creep systematics in spinel

 High-temperature creep behavior in Ni₂GeO₄ spinel was investigated using synthetic polycrystalline aggregates with average grain sizes ranging from submicron to 7.4 microns. Cylindrical samples were deformed at constant load in a gas-medium apparatus at temperatures ranging from 1223 to 1523 K and stresses ranging from 40 to 320 MPa. Two deformation mechanisms were identified, characterized by the following flow laws: where σ is in MPa, d is in μm and T is in Kelvin. These flow laws suggest that deformation was accommodated by dislocation creep and grain-boundary diffusion (Coble) creep, respectively. A comparison with other spinels shows that an isomechanical group can be defined for spinels although some differences between normal and inverse spinels can be identified. When creep data for olivine and spinel are normalized and extrapolated to Earth-like conditions, spinel (ringwoodite) has a strength similar to olivine in the dislocation creep regime and is considerably stronger than olivine in the diffusion creep regime at coarse grain size. However, when grain-size reduction occurs, spinel can become weaker than olivine due to its high grain-size sensitivity (Coble creep behavior). Analysis of normalized diffusion creep data for olivine and spinel indicate that spinel is weaker than olivine at grain sizes less than 2 μm. Received: 18 June 2000 / Accepted: 3 April 2001