Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

On a global expansion of the disturbing function in the planar elliptic restricted three-body problem

Starting with a simple Taylor-based expansion of the inverse of the distance between two bodies, we are able to obtain a series expansion of the disturbing function of the three-body problem (planar elliptic case) which is valid for all points of the phase space outside the immediate vicinity of the collision points. In particular, the expansion is valid for very high values of the eccentricity of the perturbed body. Furthermore, in the case of an interior mean-motion resonant configuration, the above-mentioned expression is easily averaged with respect to the synodic period, yielding once again a global expansion of (R) valid for very high eccentricities.Comparisons between these results and the numerically computed exact function are presented for various resonances and values of the eccentricity. Maximum errors are determined in each case and their origin is established. Lastly, we discuss the applicability of the present expansion to practical problems.     

Bacterial productivity in the Prydz Bay and its adjacent waters,Antarctic

1　IntroductionBacteriaandtheiractivitiesplayanimportantroleintheelementalbiogeochemicalcyclesandenergytransformingintheocean (Zhenetal.1 997) .DortchandPackard(1 989) proposedthatfoodwebsintheeutrophicwatersaredominatedbythebiomassofprimaryproducerswhilefoodwebsintheoligotrophicwatersaredominatedbythebiomassofmicrobes.Heterotrophicbacteriahadbeenshowntoplayanimportantroleinthedecompositionoflarge ,rapidlysinkingorganicparticleswithinandbelowtheeuphot iczone ,andfurthertoaffecttheelementaldyn…     

On the stability of particular solutions of the singly averaged Hill problem

We consider the particular solutions of the evolutionary system of equations in elements that correspond to planar and spatial circular orbits of the singly averaged Hill problem. We analyze the stability of planar and spatial circular orbits to inclination and eccentricity, respectively. We construct the instability regions of both particular solutions in the plane of parameters of the problem.     

济宁市嘉祥县石灰岩矿山地质环境评价与治理

在对嘉祥县石灰岩矿进行地质灾害危险性评估、矿山环境地质问题评价的基础上,建立了一套评价体系,其中地质灾害危险性评估分为2个评价指标,矿山环境地质问题评价分为2种要素3个指标,同时将矿山恢复治理难易程度也作为一个评价因子。评价过程中对各指标危害性大、中、小程度均单独赋值,然后将各指标的分值进行叠加,确定出矿山环境地质问题的等级,将概划出的13个评价单元分为极差、差、一般3个区。提出了强化矿山管理、植树造林、科学避让、修建拦水坝等保护与治理措施及建议。     

有关边界层问题中一类奇异积分方程新的存在性结果

对边界层理论新结果中出现的一类奇异积分方程w（t）=∫1 t（1-s）（λ＋λs＋s）/w（s）ds＋（1-t）∫t 0s/w（s）ds,t∈（0,1）进行讨论，并得出了上述方程在λ∈（-1/2,0）上正解存在性的新结果。     

Virtual Huanghe River System： Framework and Technology

1 Introduction Huanghe (Yellow) River basin is located in 32°–42°N, 96°–119°E. The area of the catchment is more than 752,000km2. The river is 5464km long with a drop in elevation of 4830m. Among the whole area, the moun- tainous and stone area accounts for 29%, loess and hills area 46%, sandy area 11% and plain area 14%, respec- tively. Different natural landscapes exist in this area. The Huanghe River flows through the Loess Plateau, where the soil is eroded seriously (Wang, 2002;…     

On The Concept Of Periapsis In Hill’s Problem

The concept of closest approach is analyzed in Hill’s problem, resulting in a partitioning of the position space. The different behavior between the direct and retrograde motion is explained analytically, resulting in a simple estimate of the variation of Hill’s periodic and quasi-circular orbits as a function of the Jacobi constant. The local behavior of the orbits on the zero velocity surfaces and an analytical definition of local escape and capture in Hill’s problem are also given.     

X-ray synchrotron emission from the oblique shock in the jet of the powerful radio galaxy 3C 346

We report the first detection, with Chandra , of X-ray emission from the jet of the powerful narrow-line radio galaxy 3C 346. X-rays are detected from the bright radio and optical knot at which the jet apparently bends by approximately 70°. The Chandra observation also reveals a bright galaxy-scale atmosphere within the previously known cluster and provides a good X-ray spectrum for the bright core of 3C 346. The X-ray emission from the knot is synchrotron radiation, as seen in lower-power sources. In common with these sources, there is evidence of morphological differences between the radio/optical and X-ray structures, and the spectrum is inconsistent with a one-component continuous-injection model. We suggest that the X-ray-bright knot is associated with a strong oblique shock in a moderately relativistic, light jet, at ∼ 20° to the line of sight, and that this shock is caused by the jet interacting with the wake in the cluster medium behind the companion galaxy of 3C 346. The general jet curvature can result from pressure gradients in the cluster atmosphere.