珠江口沉积物酸挥发性硫化物与重金属生物毒性的研究

研究了2003年10月采于珠江口5个站位的沉积物剖面酸挥发性硫化物(AVS)和同时提取的重金属(SEM:Pb,Zn,Cu,Cd,Ni)。其中,站位1、2位于中滩,其沉积物的AVS含量变化范围较小,为0.25—4.06μmol.g-1;站位3、4位于西滩,其沉积物的AVS含量变化范围较大,为0—26.09μmol.g-1。中滩和西滩沉积物的AVS含量均随深度增加。西滩表层沉积物的AVS含量接近于零,这可能与该水域较强的底层流和沉积物的再悬浮作用有关。站位5位于珠江口外侧,其表层沉积物的AVS含量相对较高,且垂向变化较小,可能是还原性沉积物间歇性再悬浮后重新沉积的结果。站位1、2和5沉积物中同时提取的重金属含量大体在0.95±0.2μmol.g-1范围内,随深度增加略呈下降趋势;而西滩沉积物重金属含量相对较高,为1.43—2.42μmol.g-1,且在一定深度范围内随深度增加呈明显下降的趋势,表明珠江口西滩沉积物中的重金属污染有加重的趋势。对AVS/SEM摩尔比值和单个金属的毒性效应研究显示,珠江口内尤其是西滩的表层沉积物存在重金属污染,对其中生活的底栖生物具有潜在的毒性效应。     

梭鱼标准代谢、内源氮排泄与体重和温度的关系

在 13.5 ,18,2 1.5 ,2 4和 2 7℃ 5个温度条件下测定了梭鱼 (体重范围 1.88～ 14.0 2 g)的标准代谢率和内源氮排泄率。梭鱼标准代谢率随体重的增加而增加 ,二者的关系为幂函数关系 ;随温度的升高而增加 ,二者的关系为指数关系 ;标准代谢率与体重和温度的关系可用如下方程表示 :RS=0 .12 4 6 W0 .9954 e0 .0 84 1T(r2 =0 .92 2 0 )。梭鱼的氨氮、尿素、总氮及能量的排泄率随体重和温度的增加而增加 ,与体重为幂函数关系 ,与温度的关系为多项式形式。梭鱼氨氮和尿素日排泄率的变幅分别为 0 .15～ 0 .88mg N/d和 0 .0 3～ 0 .2 9mg N/d。不同温度下 ,尿素排泄量占总氮比例在 9.9%～2 2 .4 9%之间 ,随温度升高该值有逐渐增大的趋势。     

花鲈幼鱼个体代谢与体重关系的初步研究

实验室条件下测定花鲈 ( L ateolabrax japonicus C & V)的代谢率 ,温度为 ( 2 5.2± 0 .5)℃ ,鱼体湿重范围 :4 .64～ 52 .2 8g(平均体重 17.81g± 0 .33g)。饥饿鱼的正常代谢相关于体重的关系式 :Rr=15.37W0 .74 4。( r=0 .934 )。摄食代谢与摄食量呈线性正相关关系 ,摄食代谢水平为正常代谢的 1.8～ 2 .4倍。     

Benthic Metabolism and Standing Stock in the Central and Northern Deep Red Sea

Abstract. Benthic metabolism and standing stocks were investigated in the deep Red Sea between 21^o and 27^oN, Activity was assessed by the determination of respiration rates with a shipboard method and by calculating oxygen consumption from the activity in the electron transport system. We attempted to compare results from different latitudes within the warm Red Sea and with data from cold Atlantic environments. Our investigations were part of an environmental risk assessment to evaluate future mining of metalliferous sediments from the Atlantis II Deep.     

The European coastal zone: characterization and first assessment of ecosystem metabolism

The geomorphic, oceanographic, terrestrial and anthropogenic attributes of the European coastal zone are described and published data on ecosystem function (primary production and respiration) are reviewed. Four regions are considered: the Baltic Sea, Mediterranean Sea, Black Sea and the European Atlantic coast including the North Sea. The metabolic database (194 papers) suffers from a non-homogeneous geographical coverage with no usable data for the Black Sea which was therefore excluded from this part of our study. Pelagic gross primary production in European open shelves is, by far, the most documented parameter with an estimated mean of 41 mmol C m⁻² d⁻¹, the lowest value is reported in the Mediterranean Sea (21 mmol C m⁻² d⁻¹) and the highest one in the Atlantic/North Sea area (51 mmol C m⁻² d⁻¹). Microphytobenthic primary production, mostly measured in shallow areas, is extrapolated to the entire 0–200 m depth range. Its contribution to total primary production is low in all regions (mean: 1.5 mmol C m⁻² d⁻¹). Although macrophyte beds are very productive, a regional production estimate is not provided in this study because their geographical distribution along the European coastline remains unknown. Measurements of pelagic community respiration are clearly too sparse, especially below the euphotic zone, to yield an accurate picture of the fate of organic matter produced in the water column. With a mean value of 17 mmol C m⁻² d⁻¹, benthic community respiration consumes approximately 40% of the pelagic organic matter production. Estuaries generally exhibit high metabolic rates and a large range of variation in all parameters, except microphytobenthic primary production. Finally, the problem of eutrophication in Europe is discussed and the metabolic data obtained in the framework of the Land–Ocean Interactions in the Coastal Zone (LOICZ) project are compared with available direct measurements of net ecosystem production.     

Seasonal dynamics of elemental sulfur in two coastal sediments

A spectrophotometric method for elemental sulfur (S⁰) analysis without interference from other reduced sulfur compounds was adapted for the use in reducing sediments. The S⁰ distribution in two coastal sediments was studied regularly from summer to winter and compared to factors regulating the S⁰ accumulation, such as redox potentials, the rate of bacterial sulfide production and the general sulfur chemistry. Dense coatings of sulfur bacteria developed on the sediment surface of a sulfuretum which had an S⁰ concentration of up to 41 μmol S cm^?3. The 2·5-mm thick bacterial coating contained 40% of all S⁰ in the sediment. A more typical marine sediment with a few cm thick oxidized surface layer had an S⁰ maximum of 1–3 μmol S cm^?3 at 2–4 cm depth. The S⁰ maximum in both sediments increased from summer to winter as the sediments gradually became more oxidized. The deeper layers maintained a low S⁰ concentration. Most of the S⁰ in the upper few mm of a laboratory sulfuretum was present inside sulfur bacteria and actively migrated up and down with the bacteria depending upon the changing light and oxygen conditions.     

Interaction of copper with fatty acids in Soxhlet extraction and its influence

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.     

Isotopes and Geochronology of the Meixian-type Pb-Zn-(Ag)Deposits,Central Fujian Rift,South China:Implications for Geological Events

Central Fujian Rift is another new and important volcanogenic massive sulfide Pb-Zn polymetallic metallogenetic belt. In order to find out the material genesis and mineralization period of Meixian-type Pb-Zn-Ag deposits, S and Pb isotope analysis and isotope geochronology of ores and wall rocks for five major deposits are discussed. It is concluded that the composition of sulfur isotope from sulfide ore vary slightly in different deposits and the mean value is close to zero with the 834S ranging from -3.5‰ to ＋5.6‰ averaging at ＋2.0‰, which indicates that the sulfur might originate from magma or possibly erupted directly from volcano or was leached from ore-hosted volcanic rock. The lead from ores in most deposits displays radioactive genesis character （206pb/204pb〉18.140, 207Pb/204pb〉15.584, 208pb/204pb〉38.569） and lead isotope values of ores are higher than those of wall rocks, which indicates that the lead was likely leached from the ore-hosted volcanic rocks. Based on isotope data, two significant Pb-Zn metallogenesis are delineated, which are Mid- and Late-Proterozoic sedimentary exhalative metailogenesis （The single zircon U-Pb, Sm-Nd isochronal and Ar-Ar dating ages of ore- hosted wall rocks are calculated to be among 933-1788 Ma.） and Yanshanian magmatic hydrothermal superimposed and alternated metallogenesis （intrusive SHRIMP zircon U-Pb and Rb-Sr isochronal ages between 127-154 Ma）.     

Distribution Characteristics of Sulfur and the Main Harmful Trace Elements in China’s Coal

To promote the rational development and use of clean coal resources in China, data on the regional and age distribution of sulfur, arsenic and other harmful elements in Chinese coal was broadly collected, tested for content, and analyzed. Coal in northwestern China is characterized by low to extremely low levels of sulfur; the coal of the Taiyuan Formation in northern China mainly has high-sulfur content; that of the Shanxi Formation is mainly characterized by low sulfur coal; and the Late Permian coal in southern China has overall higher sulfur content; other regions have low sulfur coal. The average content of harmful trace elements in the bulk of China＇s coal is similar to the corresponding content in the coal of the North America and the rest of the world, whereas the content of various elements （Hg, Sb and Se） is different in magnitude to the corresponding percentage in the crust. The average content of the elements Cr, Se, Co, Be, U, Br in Late Permian coal in S China ranks first in the country whereas the average content of Hg and CI in the coals of Late Carboniferous to Early Permian age in N China are the highest. The average content of Mn in Early and Middle Jurassic coal is higher in NW China. The high content of harmful elements in some coal should cause particular concern both in the development and utilization of coal.