Exchange flow of oil and sea-water in a ruptured submarine pipeline

The rupture of a submarine oil pipeline starts various mechanisms leading to an oil spill. Among these mechanisms the leakage of oil driven by the difference in specific gravities of oil and sea-water is difficult to estimate. A simple mathematical model has been developed and laboratory experiments have been carried out to obtain an insight into the density-driven exchange flow and to determine the leak rate. The mathematical model is predictive and takes account of the effects of friction, inclination of the pipeline, and inertia of the fluid. The experiments were done in a horizontal model pipeline. Theoretical and experimental results are in satisfactory agreement.     

GIS在处置地下管线突发事件中的应用研究——以苏州市地下综合管网应急处置系统为例

随着经济社会的不断发展,城市建设步伐不断加快。近几年,各类地下管线突发事件频发。通过"苏州市地下综合管网应急处置系统"项目的开发和实践,本文试图从总体上论述地下综合管网突发事件的处置过程、应用原理及相关的技术实现,重点阐述了基于"12345"便民服务中心工作平台,在充分利用GIS的网络分析技术的基础上,实现城市地下管网突发事件应急处置的自动化和信息化。     

Seismic response predictions of multi‐span steel bridges through pushover analysis

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.     

钢支撑性能对高层钢结构动力反应的影响

钢框架－支撑结构体系是高层钢结构常用的结构体系。支撑的性能对高导钢框架－支撑体系的动力性能影响较大，其中支撑的工细比是关键的影响因素。文中通过大量的计算分析研究支撑长细比对高层钢框架－支撑体系弹塑性地震反应的影响，所得结论可供工程设计时参考。     

巨型钢结构抗震研究综述

介绍了巨型结构及其特点，着重总结、论述了巨型钢结构在分析方法和抗震研究方面的发展现状，指出了这种钢结构形式在抗震研究中存在的主要问题及今后进一步的研究方向。     

基础隔震层钢螺旋弹簧软碰撞限位实验研究

设计制作了基础隔震软碰撞限位实验模型与3种类型的钢螺旋弹簧限位器,给出了实测的限位器力学特性参数。进行9种工况的振动台模型实验,分析实验数据得出了软碰撞限位器参数对结构反应的影响规律,优选出了适用于本隔震实验模型的软碰撞限位工况。     

唐山市钢铁工业发展特征及动力机制分析

唐山市钢铁工业自20世纪80年代以来一直为唐山市的支柱产业,90年代以来,省属特大型企业唐钢和地方钢铁企业都得到了迅速发展,在唐山市经济总量中占据着举足轻重的地位。本文详细分析唐山市钢铁产业的发展过程,探讨改革开放以来影响城市最具代表性产业的驱动因素。研究表明,基于本地化的区域产业基础和国家引导下的制度因素是唐山市钢铁工业迅速发展的主要驱动力,企业在动态的环境中适应和创新的能力则是内在因素。产品结构雷同、彼此利益独立使企业之间面临着激烈竞争,因此建议发挥政府的协调作用,引导地方企业调整工艺流程和产品结构,扶植相关产业,促进区域经济整体发展。     

外包钢-混凝土组合梁与钢管混凝土柱连接节点的滞回性能研究

为研究外包钢-混凝土组合梁与钢管混凝土柱连接节点的抗震性能,基于外包钢-混凝土组合梁与钢管混凝土柱连接节点低周反复荷载作用下的试验结果和有限元的模拟,分析了两类试验节点的滞回特性,提出外包钢-混凝土组合梁与钢管混凝土柱连接节点的三折线恢复力模型及其特征参数的取值范围,并给出恢复力模型表达式。结果表明,试件具有良好的耗能能力,建立的恢复力模型骨架曲线与试验值接近;有限元与试验所得的滞回曲线及骨架曲线在弹性阶段吻合较好,随着荷载的反复,两者之间的差异逐渐增大。     

AN ANALYSIS OF THE SEISMIC CHARACTERISTICS OF STEEL-JACKETED CIRCULAR BRIDGE COLUMNS

The current approach for seismic retrofit of deficient bridge columns in California involves extensive use of steel jacketing. In this paper, the influence of steel jacketing on the lateral response of circular bridge columns is studied; particularly, the enhancement of the ultimate compressive strain of concrete, the increase in curvature ductility capacity and the increase in lateral stiffness are investigated. The current steel jacket thickness used in California is shown to enhance the ultimate compressive strain of concrete by 4–9 times the spalling strain of unconfined concrete. For larger steel jacket thickness, the ultimate limit state of steel-jacketed columns may be governed by the low-cycle fatigue fracture of the longitudinal reinforcement instead of the ultimate compressive strain of concrete. Steel jacketing is also expected to increase significantly the lateral stiffness of columns if full-height steel jackets are used. The increase in lateral stiffness of flexural columns (3⩽L/D⩽9) is estimated to be 35–60 per cent using current jacket thickness. Inelastic dynamic analyses of steel-jacketed columns using ground motions recorded during the 1989 Loma Prieta earthquake indicated that the current steel jacket thickness provides adequate protection against the damage potential of the ground motions with comparable spectral acceleration as that specified in current design spectra, and the damage sustained by the steel-jacketed column is likely to be repairable.     

SEISMIC IMPACT LOADING IN INELASTIC TENSION-ONLY CONCENTRICALLY BRACED STEEL FRAMES: MYTH OR REALITY?

Tension-Only Concentrically Braced Frames (TOCBF) exhibit deteriorating pinched hysteretic behaviour during strong earthquakes. Slender braces transit between an elastic buckling state, a restraightening state, in which they carry almost no load, an elastic tensile loading state as they are suddenly taut and, finally, a tensile yielding state. It has long been suspected that the sudden increase in tensile forces in the braces of TOCBSF creates detrimental impact loading on the connections and other structural elements. No experimental evidence, however, has been provided so far to confirm, or to quantify, this impact phenomenon. This paper addresses this issue through shake table tests of half scale, two-storey, TOCBF models. By normalizing the hysteresis loops of braces obtained from shake table tests to the yield strength of steel obtained from quasi-static tests, the increase in tensile forces in the braces was obtained. Results of dynamic tensile tests on steel coupons under similar strain rates as observed during the shake table tests showed that this increase in tensile forces is not the result of impact, but is rather caused by a yield strength increase of the steel under high strain rate. A procedure is proposed to estimate and account for this increase in tensile forces in the braces at the design stage.