Low-frequency damping of a moored semisubmersible obtained from simulated extinction tests and mean wave drift forces

Low-frequency damping of a moored semisubmersible drilling platform was obtained from numerical extinction tests simulated in still water and in regular waves and from mean wave drift forces calculated at zero forward speed. The influence of drag forces was represented by the modified Morison equation. The platform as used for the 18th ITTC Comparative Mooring Study was analyzed in irregular beam waves. The computed time series of sway as well as the corresponding sway response spectrum compared favourably with model test measurements, demonstrating that this procedure to determine low-frequency damping can be effective.     

Mechanism for the rapid motion of the Qianjiangping landslide during reactivation by the first impoundment of the Three Gorges Dam reservoir, China

The first impoundment of the Three Gorges Dam reservoir in China started from a water surface elevation of 95 m on June 1, 2003 and reached 135 m on June 15, 2003. Shortly after the water level reached 135 m, many slopes began to deform and some landslides occurred. The Qianjiangping landslide is the largest one; it occurred on the early morning of July 14, 2003 and caused great loss of lives and property. Field investigation revealed that, although failure occurred after the reservoir reached 135 m, the stability of the slope was already reduced by preexisting sheared bedding planes. To study the mechanism of the rapid motion of this reactivated landslide, two soil samples were taken from a yellow clay layer and a black silt layer in the sliding zone, respectively, and a series of ring shear tests were conducted on the samples. One series of ring shear tests simulates the creep deformation behavior, while the other series simulates different shear rates. Conclusions drawn from analysis of the ring shear tests indicate that the mechanism of the rapid motion of the reactivated landslide was caused by the rate effect of the black silt layer during the motion phase after the creep failure. The yellow clay layer did not play any important role in the rapid motion in the 2003 event.     

Characterizing heterogeneous permeable media with spatial statistics and tracer data using sequential simulated annealing

Characterizing heterogeneous permeable media using flow and transport data typically requires solution of an inverse problem. Such inverse problems are intensive computationally and may involve iterative procedures requiring many forward simulations of the flow and transport problem. Previous attempts have been limited mostly to flow data such as pressure transient (interference) tests using multiple observation wells. This paper discusses an approach to generating stochastic permeability fields conditioned to geologic data in the form of a vertical variogram derived from cores and logs as well as fluid flow and transport data, such as tracer concentration history, by sequential application of simulated annealing (SA). Thus, the method incorporates elements of geostatistics within the framework of inverse modeling. For tracer-transport calculations, we have used a semianalytic transit-time algorithm which is fast, accurate, and free of numerical dispersion. For steady velocity fields, we introduce a transit-time function which demonstrates the relative importance of data from different sources. The approach is illustrated by application to a set of spatial permeability measurements and tracer data from an experiment in the Antolini Sandstone, an eolian outcrop from northern Arizona. The results clearly reveal the importance of tracer data in reproducing the correlated features (channels) of the permeability field and the scale effects of heterogeneity.     

吉林台爆破料应力应变关系的三轴试验研究

通过室内大型三轴实验，研究了吉林台水库爆破料在不同级配下的应力应变关系，得到了在一定击实功下爆破料的最大干密度随细料含量变化的规律，分析了爆破料在不同级配和不同围压下应力与应变的变化规律、轴向应变与体积应变的关系及抗剪强度变化特性．从微观的角度说明了变化规律产生的原因，得出爆破料的抗剪强度随级配的变化而变化的规律．     

Statistical tests for regional seismic phase characterizations

In seismic analysis some assumptions are often made aboutthe data, e.g. stationarity and Gaussianity. This is not obvious for all realseismic data. Here, we use statistical tests for characterization of regionalseismic data. We apply tests for stationarity, symmetry, linearity, andtime-reversibility. In the analysis we use twelve regional seismic events inFennoscandia recorded with the seismic small-aperture arrays NORESS,ARCESS and FINESA at hypocentral distances in the range from 160 to1580 km. For the tests we use the regional phases Pn, secondary P, Sn and Lg-phases and the preceding noise. Two of the eventsare explosions, two are rockbursts and eight are earthquakes. Theperformance and possibilities of using statistical tests based on bispectra, asa complementary tool for conventional analysis of seismic phases isdemonstrated. The preceding noise recorded before the first onset of theP-wave for the twelve events is tested to be spatially stationarybetween each channel within each array and temporal stationary in 21consecutive time windows of 3.2 sec each. Also, the preceding noise issymmetric and linear. The seismic phases defined by the symmetry test asnon-Gaussian (not symmetric) are all linear. This means a linear model canbe used to characterize both the noise and the phases. The first P-phase for the two explosions is characterized as non-Gaussian at thethree arrays. For all 36 possibly first P-phase arrivals at the three arraystations, 23 are non-Gaussian. The second P-phase is non-Gaussian at13 of 36 data records, the S-phase at eleven of 36 and the Lg-phase at nine of 36. For all the four phases more than 32 of possible36 are time-reversible.     

Empirical correlations of soil parameters based on Cone Penetration Tests (CPT) for Greek soils

This study presents the results of Cone Penetration Tests (CPT) and estimated correlations with the results of other in-situ tests (standard penetration test, cross-hole, seismocone) and laboratory tests (classification and undrained shear strength tests). These tests cover nearly all types of penetrable soils in Greece and, together with the formulation of empirical correlations, complement and improve on previous studies due to the significant number of CPT measurements.     

一种组合优化的多边形化简方法

以多边形轮廓为目标 ,依据曲线特征点将其分解为一系列的弯曲特征 ,并对此弯曲特征集实施组合优化 ,将入围弯曲首尾相连 ,即可得到最终的化简结果     

Analysis of pressuremeter geometry effects in clay using critical state models

The conventional interpretation methods of pressuremeter testing effectively approximate pressuremeter membranes as infinitely long. As a result, the effects of the two‐dimensional geometry of pressuremeters are ignored, leading to an overestimation of soil shear strength by pressuremeter testing, as demonstrated in several previous studies. This paper presents results of a numerical study of two‐dimensional geometry effects on self‐boring pressuremeter tests in undrained clay. The results are obtained using critical state soil models with an effective stress formulation. This is in contrast to most (if not all) existing studies on pressuremeter geometry effects, which were based on perfectly plastic soil models (e.g. Yu (Cavity expansion theory and its application to the analysis of pressuremeters. DPhil Thesis, The University of Oxford, 1990), Yeung and Carter (Proc. 3rd Int. Symp. on Pressuremeters, 1990), and Houlsby and Carter (Géotechnique, 1993; 43 (4):567–576)). The present study suggests that the overestimation of soil strength due to the neglect of finite pressuremeter length is significantly affected by the soil model used in the calculations. It is found that for clays with a high overconsolidation ratio (OCR) the strength overestimation predicted using critical state soil models could be considerably smaller than that predicted using perfectly plastic soil models. The main conclusion of this numerical study is that care must be exercised before directly applying any numerically determined pressuremeter geometry correction factors in practice. Copyright © 2005 John Wiley & Sons, Ltd.     

基于连续消光特征分析的岩石薄片分析系统

连续消光是指在正交偏光显微镜下,岩石薄片随载物台旋转而发生消光强弱连续变化的现象.作为人工鉴定岩石薄片的重要依据,提取后的连续消光特征可以用于实现岩石薄片的自动分析.结合数字图像处理技术与聚类划分算法,开发出一套能够分割出孔隙、颗粒轮廓,实现颗粒类别划分,并对结果做定量分析的岩石薄片分析系统.从矿物的消光特征本质出发,...