Analytical study of ground motion caused by seismic wave propagation across faulted rock masses

Studying seismic wave propagation across rock masses and the induced ground motion is an important topic, which receives considerable attention in design and construction of underground cavern/tunnel constructions and mining activities. The current study investigates wave propagation across a rock mass with one fault and the induced ground motion using a recursive approach. The rocks beside the fault are assumed as viscoelastic media with seismic quality factors, Q_p and Q_s. Two kinds of interactions between stress waves and a discontinuity and between stress waves and a free surface are analyzed, respectively. As the result of the wave superposition, the mathematical expressions for induced ground vibration are deduced. The proposed approach is then compared with the existing analysis for special cases. Finally, parametric studies are carried out, which includes the influences of fault stiffness, incident angle, and frequency of incident waves on the peak particle velocities of the ground motions.     

A multiscale work-analysis approach for geotechnical structures

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.     

P‐wave transmission across fractures with nonlinear deformational behaviour

Stress wave attenuation across fractured rock masses is a great concern of underground structure safety. When the wave amplitude is large, fractures experience nonlinear deformation during the wave propagation. This paper presents a study on normal transmission of P‐wave across parallel fractures with nonlinear deformational behaviour (static Barton–Bandis model). The results show that the magnitude of transmission coefficient is a function of incident wave amplitude, nondimensional fracture spacing and number of fractures. Two important indices of nondimensional fracture spacing are identified, and they divide the area of nondimensional fracture spacing into three parts (individual fracture area, transition area and small spacing area). In the different areas, the magnitude of transmission coefficient has different trends with nondimensional fracture spacing and number of fractures. In addition, the study reveals that under some circumstances, the magnitude of transmission coefficient increases with increasing number of fractures, and is larger than 1. Copyright © 2006 John Wiley & Sons, Ltd.     

ANALYSIS OF DRIVING FORCES ON THE CHANGE OF HISTORICAL FARMLAND USE IN SHANDONG PROVINCE DURING THE QING DYNASTY (1644-1911)

1INTRODUCTIONTheIGBP-IHDP(InternationalGeosphere-BiosphereProgramme,andInternationalHumanDimensionPro-gramme)jointproject—LUCC(landuse/coverchange)isaninterdisciplinaryprogramdesignedtoimprovetheunderstandingofthedynamicsofland-useandland-coverchangeasinputstoandconsequencesofglobalenvironmentalchangeandsustainabledevelopment(CHARLOTTE,2002).Inparticularthedifferentbio-geochemicalmodeling(e.g.theglobalcarboncycle)ac-tivitiesandcomparativestudies,suchasthoseconduct-edbyIGBP-G…     

The response of an elastic half‐space under a momentary shear line impulse

The response of an ideal elastic half‐space to a line‐concentrated impulsive vector shear force applied momentarily is obtained by an analytical–numerical computational method based on the theory of characteristics in conjunction with kinematical relations derived across surfaces of strong discontinuities. The shear force is concentrated along an infinite line, drawn on the surface of the half‐space, while being normal to that line as well as to the axis of symmetry of the half‐space. An exact loading model is introduced and built into the computational method for this shear force. With this model, a compatibility exists among the prescribed applied force, the geometric decay of the shear stress component at the precursor shear wave, and the boundary conditions of the half‐space; in this sense, the source configuration is exact. For the transient boundary‐value problem described above, a wave characteristics formulation is presented, where its differential equations are extended to allow for strong discontinuities which occur in the material motion of the half‐space. A numerical integration of these extended differential equations is then carried out in a three‐dimensional spatiotemporal wavegrid formed by the Cartesian bicharacteristic curves of the wave characteristics formulation. This work is devoted to the construction of the computational method and to the concepts involved therein, whereas the interpretation of the resultant transient deformation of the half‐space is presented in a subsequent paper. Copyright © 2003 John Wiley & Sons, Ltd.     

The efifect of wave breaking on surface wave imaging by Synthetic Aperture Radar

The effect of ocean wave breaking as a non-Bragg mechanism on backscattering cross-section and modulation transfer functions (MTF) of radar was investigated based on Bragg resonance theory and parametric method. The result showed that the additional effect of wave breaking on backscattering cross-section is not more than 20% except for the small incident angle of VV polarized electromagnetic (e.m.) wave but is significant for HH polarized e.m. wave. Breaking waves lead to increase in the modulus of tilt modulation MTF and the larger the wind speed, the faster the increase. For large incident angle, the modulus of tilt modulation MTF with wave breaking decreases quickly with incident angle for HH polarization and approach to that without wave breaking for VV polarization. The hydrodynamic MTF increases 30%-60% when considering wave breaking and the increase is larger for HH polarization than for VV polarization.     

ANALYSIS OF DRIVING FORCES ON THE CHANGE OF HISTORICAL FARMLAND USE IN SHANDONG PROVINCE DURING THE QING DYNASTY （1644-1911）

How land-cover has been changed by human use over the last 300 years is one of the five overarching questions guiding the Land-use/Cover Change (LUCC) Science/Research Plan. China has variety of historical docu-ments providing unique data superiority. So the characteristics of farmland area in Shandong Province during the Qing Dynasty (1644-1911) are summarized firstly: 1) the rising trend of farmland area was striking; 2) farmland area had re-markable fluctuation; 3) farmland area per capita decreased dramatically; 4) wasteland reclamation index increased rapidly. Then, the driving forces of farmland area change are analyzed. It is concluded that natural and human factors are jointly influential. Among the driving forces, human dimensions are the main factors of farmland area change,which direct the general tendency of the changes mentioned above. And the natural factors influence the stability of farmland area as well. Variation of the natural factors would act as the major contributory factor to farmland area change during years or periods of abrupt climatic changes, or during the intensive occurring periods of natural hazards.Besides, the passive aspects of human factors, such as war chaos also influenced the fluctuation of the farmland area.This research indicates that it is feasible to study the land-use/cover change by Chinese historical literatures, which has huge potential to provide a comprehensive picture of the growing dominance of human land-use and land-cover pat-terns that can be used in many global change research oroiects.     

有限元法与伪谱法混合求解弹性波动方程

在地震波场数值模拟中,有限差分法、有限元法和伪谱法都是常用的基本方法,但它们各有不同的适应性和优缺点,如有限差分法、有限元法都存在减弱网格频散和提高计算效率的矛盾,而伪谱法的网格频散小且计算效率高.有限差分法和伪谱法在处理地表结构复杂或地表剧烈起伏以及地下结构复杂的情况时存在较大的难度,而有限元法可较为理想地拟合起伏地表和任意弯曲界面,且可方便地处理自由边界条件和界面边界条件.尝试将有限元法和伪谱法相结合,形成地震波场数值模拟的一种混合方法,利用二者的优点,克服二者的缺点,达到既减弱网格频散又提高计算精度和效率的目的.并采用所谓的‘过度区域‘技术解决两种不同算法的衔接问题.模拟实例表明,给出的混合模拟方法不失为弹性波场数值模拟的一种有效方法.     

富氏谱分析法模拟地壳垂直运动的地学依据及其策应力模型

应用地壳波浪与镶嵌构造学说对富氏谱分析法提取地壳垂直形变信息的科学性做了地质学意义上的阐释 ,并提出了根据多期形变资料提取特定波段上构造策应力的数学模型     

Robe's restricted three-body problem revisited

Robe's restricted three-body problem is reanalyzed with a view to incorporate a new assumption, namely that the configuration of the fluid body is that described by an hydrostatic equilibrium figure (Roche's ellipsoid). In the concomitant gravitational field a full treatment of the buoyancy force is given. The pertinent equations of motion are derived, the linear stability of the equilibrium solution is studied and the connection between the effect of the buoyancy forces and a perturbation of the Coriolis force is pointed out.