CHARACTERIZATION OF LACTATE DEHYDROGENASE ISOZYME PATTERN AND MORPHOLOGY OF THREE MARINE FISH CELL LINES

Three continuous marine fish cell lines of FG (i. e., Hounder Gill) from flounder (Paralichthys olivaceus) gill, SPH (i. e. , Sea Perch Heart) from sea perch (Lateolabrax japonicus) heart and RSBF (i.e., Red Sea Bream Fin) from red sea bream (Pagrosomus major) fin, were characterized by lactate dehydrogenase (LDH) isozyme and morphological analysis. The LDH isozyme patterns of these three cell lines and their corresponding tissues of origin were investigated and compared. The results showed: (1) No difference was found in the LDH isozyme patterns of FG and flounder gill tissue. However, the LDH isozyme patterns of SPH and RSBF were significantly different from their corresponding tissues of origin; (2) LDH isozyme patterns of FG, SPH and RSBF were markedly different from each other and could serve as genetic markers for species identification and detection of cross contamination. Morphological change analysis of these three cell lines in comparison to their original tissues indicated that FG cells still appeared epithelioid without morphological transformation. However, morphological changes were found in SPH and RSBF compared to their original tissues. Therefore, the cellular morphology was still plastic in the relatively stable culture conditions, and it was possible that change of LDH patterns wasrelated to morphological changes of fish cells in vitro.     

Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.     

Inhomogeneous substrate analysis using EM300 backscatter imagery

Backscatter reflectivity from multibeam echo-sounders provides a powerful tool to efficiently characterize seafloor substrates. A comprehensive EM300 bathymetric and backscatter survey has been completed of Cook Strait, in central New Zealand. This paper presents a detailed analysis of the realtime corrections applied to the raw EM300 multibeam data and additional corrections required to compute angular variations of the backscatter strength. The corrections, including the local absorption coefficient, the influence of seafloor topography and sound refraction in the water column, are determined for different Cook Strait seafloor substrates. Modifying MB-System software code, we extracted the backscatter signal parameters in order to quantify the raw backscatter strength and apply additional processing. Profiles of backscatter strength versus incidence angle were computed for a variety of sites characterized by flat seafloor and homogeneous substrates, and for which ground-truth data were available. For each homogeneous site, different but characteristic backscatter profiles are observed that can be interpreted in terms of sediment facies. To analyze heterogeneous substrates, we present a statistical technique, based on a 3-dimensional distribution of (incidence angle, backscatter strength) couples that preserves geological information of the substrate components. This analysis, using backscatter data acquired on a submarine volcano, north of New Zealand, clearly differentiates soft sediments and lava flows within a heterogeneous substrate.     

声波在水-多孔介质海底界面上的反射与透射

声波在海底界面的反射和透射是海底散射、海底混响、海底目标探测的重要问题。利用Biot多孔介质声传播理论对声波在水-多孔海底界面上的反射和透射进行了分析,具体给出反射声波的反射系数,3种透射声波的透射系数以及声能透射系数随入射波入射角和频率(10~40 kHz)的变化关系,分析了各种透射波对透射声能的贡献。多孔海底介质参数分别采用Stoll和Chotiros给出的2组参数进行理论计算。     

扇贝外套腔内的共栖生纤毛虫 Ⅰ.蠕状康纤虫(Cohnilembus verminus)的形态学研究

研究扇贝外套腔内栖生的纤毛虫一蠕状康纤虫Cohnilembusverminus（Muller，1786）的形态、核器及纤毛图式。结果显示其口器结构为；M1呈单列结构，约占体长的1／2，M2由4组毛基粒构成，PM起自M2末端，Sc约由5个毛基粒构成。此外，还列表比较了不同作者报导的C．verminus种群及其它6种已知的康纤虫的主要性状特征。     

Seabed Morphology and Pollution Along the Bagnoli Coast (Naples, Italy): a Hypothesis for Environmental Restoration

Abstract. The interaction of coastal and submarine morphology with the hydrodynamic regimes exerts a control on coastal dynamic processes, conditioning the dispersion of sediments and potential pollutants existing in the area. Thus, the study of such parameters is useful in order to define environmental threats. Within the submerged sector of the Bagnoli coast and particularly in the southern part of the investigated area, there are sediment groups composed of very fine sands located in low-energy zones due to wave refraction and diffraction; they can also be found on the sea bottom and on the man-made structures typical of this zone. These areas show high pollutant levels of N, P, Cu, Fe, Mn, Ni, Pb, Zn, Cd, polyaromatic hydrocarbons (PAHs) and polychlorinated bi-phenyls (PCBs). The northern area, a place of high-energy hydrodynamic processes, also shows high concentration levels of pollutants due to the presence of secondary cell circulation.
Morphological research and analysis of textural characteristics of bottom sediments along the Bagnoli coast allowed the actual processes and their evolution in space and time to be defined. It has also been possible to correlate such processes to the seabed morphology system, the wave formations which affect the coast, the complex system of sediment transport, as well as to the man-made interventions in the area. The results of recent chemical analyses of beach sediments and bottom sediments off the Bagnoli coast were also incorporated. They prove the presence of heavy metals, PAHs and PCBs in high and sometimes very high concentrations. Finally, based on the results of research and analyses, a hypothesis for an intervention for environmental restoration has been formulated in order to renaturalise the coast through dredging and treatment of the sand, both on the seabed and on the emerged beach.     

日照近海金乌贼生物学的初步研究

为给金乌贼渔业的可持续发展提供依据,通过形态学观察及生物学测定,初步研究了山东日照岚山头近海金乌贼Sepia esculentaHoyle,1885的外部形态特征和生物学特性(胴长与体重组成、生长参数相关关系等),并结合相关资料,对其生活史进行了讨论。研究结果表明:金乌贼胴长(ML)与体重(TW)之间的关系为:TW幼体=6.0×10-4ML2.762 6,TW♀=6.0×10-4ML2.767 1,TW♂=12.0×10-4ML2.585 6;金乌贼为异速生长型,其生长迅速、个体生长差异较大;5~6月为金乌贼繁殖季节,成体交配产卵后死亡,属1年生头足类。     

Hydrothermal Vent Geology and Biology at Earth’s Fastest Spreading Rates

Earth’s fastest present seafloor spreading occurs along the East Pacific Rise near 31°–32° S. Two of the major hydrothermal plume areas discovered during a 1998 multidisciplinary geophysical/hydrothermal investigation of these mid-ocean ridge axes were explored during a 1999 Alvin expedition. Both occur in recently eruptive areas where shallow collapse structures mark the neovolcanic axis. The 31° S vent area occurs in a broad linear zone of collapses and fractures coalescing into an axial summit trough. The 32° S vent area has been volcanically repaved by a more recent eruption, with non-linear collapses that have not yet coalesced. Both sites occur in highly inflated areas, near local inflation peaks, which is the best segment-scale predictor of hydrothermal activity at these superfast spreading rates (150 mm/yr).