A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

Analytical investigations on loop-manoeuvre of underwater towed cable-array system

The paper reports on analytical case studies on the loop manoeuvre of an underwater towed cable-array system to give an insight into the tactical aspects of their naval applications. The analytical formulation and the solution procedure adopted for this three dimensional dynamic problem is also described. The case studies have been carried out for different loop radii, tow lengths, tow speeds and truncated loops. The resulting X,Y,Z co-ordinates of the towed cable-array and tow-point tensions have been computed. Based on these results, the tow-length to loop radii ratio, leading to cable-array system looping, has been found. The values of speed reduction and turning radius, causing dangerous relaxation in tow-point tension have been worked out. After exit from the loop, the timing required for realignment of the cable-array system with the ship's heading can be obtained from plots of the results. These timings help to plan ship manoeuvres to optimise reestablishment of stable listening conditions during underwater surveillance.     

海洋专用CTD单芯电缆传输技术研究

对单芯电缆传输这种通讯技术的原理进行了阐述;分析提出了部分电路、部件的技术指标;作为一种数据传输的手段,对单芯电缆传输技术在海洋专用CTD中的应用进行了相关论述.     

移动式海上基地(MOB)连接器动力响应试验研究

移动式海上基地(Mobile Offishore Base，MOB)是由若干半潜模块相连而成的超大型浮式结构物。在进行海上作业时，模块间的连接器将会产生巨大的载荷。用缩尺比为1：100的三模块MOB模型在实验室进行了连接器动力响应试验研究。文中对试验的关键问题，如连接器模型的设计、制作、安装、试验工况的确定和测试方法等作了较详细的介绍。     

Performance of hemi-cylindrical and rectangular submerged breakwaters

A parametric experimental study is conducted to compare the reflection and transmission characteristics of submerged hemi-cylindrical and rectangular rigid and water-filled flexible breakwater models. The results show that, for the rigid breakwaters, rectangular models are more effective than hemi-cylindrical ones in terms of reduction of transmitted waves. As for the flexible breakwaters, the hemi-cylindrical models may give better wave reflection than rectangular ones. However, the energy loss induced by the rectangular breakwaters is much larger and more significant to result in an overall better efficiency in terms of reduction in wave transmission. The effects of internal pressure show that the lowest pressurized flexible models considered in this work are the most effective in the reduction of the transmitted wave height. Higher wave reflection, lower wave transmission and higher energy loss are obtained consistently at the lower submergence depth ratio.     

埕岛油田海上石油平台基础冲刷研究

海洋石油平台的建立会改变平台周围的水动力条件，其中平台的基础及与之连接的海底管缆(输油管道、注水管道、海底电缆等)附近产生冲刷现象，对平台和海底管缆的安全造成威胁。根据对研究区典型平台的4次实洲水深并结合以往资料，分析了埕岛油田海上石油平台基础冲刷的过程及其规律。     

调查锚在海缆路由调查中的应用

介绍了海底调查锚的结构和用调查锚进行海缆路由调查的方法。通过实例 ,分析了不同底质情况下的实测结果。     

电容测试法判断测井电缆系统故障

测井电缆因长途颠簸、拉伸及绞车缠绕挤压,电缆连接器、电缆、绞车滑环、滑环连线等部位极易出现故障。电容测试法是一种简易、快速的检测方法,该法可在现场准确诊断出故障电缆的位置。以四芯铠装电缆为例,每根缆芯的正常阻值约为80Ω/1 000m,两缆芯间的分布电容约为170PPF/1 000m。在实际检测中,根据电容较小时测点的位置,可以有效判断故障部位;而电缆故障位置则可利用电阻及电容的线性关系进行计算予以确定。     

预应力锚索在公路高陡边坡加固整治工程中的应用

预应力锚索锚固技术以其结构合理、工艺灵巧、适应性广、施工速度快、造价低等优势，目前已广泛应用于各工程领域。在桂（林）—柳（州）高速公路高边坡加固工程中采用了该项技术，经过近1年的运转表明，效果良好。对该项工程作了详细讨论，介绍了边坡的地质条件、稳定性分析和设计参数的选取，总结了施工中锚索的造孔、下索、注浆、张拉锁定等设计及施工要点。