Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method. 相似文献
In the Lake Guillaume-Delisle area of subarctic Québec, storm-generated alluvial fans have been active sporadically throughout the Holocene. In this study, we propose that the persistence of late-lying snowpatches in fan catchments during Holocene cold episodes promoted alluvial fan activity by lowering the precipitation threshold required to trigger a torrential event. This hypothesis was tested by characterizing the depositional processes responsible for alluvial fan formation below snowpatches, and by reconstructing the Holocene alluvial fan activity. Stratigraphic and sedimentary analyses conducted on seven alluvial fans revealed that they were deposited by torrential activity leading to waterlaid, transient, or hyperconcentrated deposition. The chronology of the storm-generated alluvial fans — based on 22 radiocarbon dates — indicates that torrential activity was enhanced during the cooler Late Holocene (i.e., after ca. 3500 cal. yr BP). Snowier winters and cooler summers were beneficial to nival activity, allowing the persistence of larger snowpatches throughout the summer and fall seasons. Rainfall-induced thaw of such snowpatches during rainstorm events is inferred to have contributed to alluvial fan activity by increasing water availability. Three peaks of alluvial activity occurred during the Late Holocene (2950–2750, 1900–1400, and 800–300 cal. yr BP) and are indicative of increased storminess resulting in higher fan activity. Increased fan activity during cooler episodes was concurrent with increased runoff activity in the immediate pronival area. This stresses the importance of nivation below snowpatches and pinpoints the role of nivation in enhancing geomorphological activity during period of cooler and more humid climate in subarctic environments. 相似文献
This paper analyses the factors which influence the presence or absence of tributary-junction fans in the Iberian Range, northern Spain. Two valleys were selected, both characterised by wide variations in lithology, altitude, land use and plant cover. Two groups of factors were studied: those related to the internal characteristics of the drainage basins, which particularly control sediment generation; and those related to the characteristics of the depositional area which control accommodation space and main river power. Among the internal factors, the development of alluvial fans was related to: (i) the capacity of the basin to yield large volumes of sediment, (ii) the occurrence of intense human pressure until recent times, a good indicator of sediment yield, and (iii) the capacity of the basin to quickly increase discharge during rainstorms (discharge density and torrentiality). It is suggested that the areas that were intensively cultivated in the past, and have therefore been affected by intense erosion, have played a decisive role on the development of alluvial fans. This would imply that many of these alluvial fans have a relatively recent origin, perhaps related to the beginning of a widespread deforestation. The basins without alluvial fans are characterised by relatively steep hillslope gradients (that is, slopes that never were subjected to historical cultivation), low drainage densities and dense forest and shrub cover, mostly coinciding with high altitude basins composed of quartzite and shale bedrocks. Regarding the external factors, the shape, size and longitudinal gradient of the main river to which the fans are tributary are the most relevant conditioning factors determining the development of alluvial fans. 相似文献
This paper presents a review of the coupling concept in fluvial geomorphology, based mainly on previously published work. Coupling mechanisms link the components of the fluvial system, controlling sediment transport down the system and the propagation of the effects of base-level change up the system. They can be viewed at several scales: at the local scale involving within-hillslope coupling, hillslope-to-channel coupling, and within-channels, tributary junction and reach-to-reach coupling. At larger scales, coupling can be considered as zonal coupling, between major zones of the system or as regional coupling, relating to complete drainage basins. These trends are illustrated particularly by the examples of hillslope-to-channel coupling in the Howgill Fells, northwest England, badland systems in southeast Spain, alluvial fans in Spain, USA and UAE, and base-level-induced dissection of Neogene sedimentary basins in southeast Spain. As the spatial scales increase, so do the timescales involved. Effective temporal scales relate to magnitude and frequency characteristics, recovery time and propagation time, the relative importance changing with the spatial scale. For downsystem coupling at the local scale, the first two are important, with propagation time increasing in importance in larger systems, especially in those involving upsystem coupling related to base-level change. The effective timescales range from the individual event, with a return period of decades, through decadal to century timescales for downsystem coupling, to tens to hundreds of thousands of years for the basinwide response to base-level change. The effective timescales influence the relative importance of factors controlling landform development. 相似文献
The purpose of this study was to elucidate the floristic and structural characteristics of simple alluvial fan vegetation of southern Sinai and to relate them to environmental variation. The main question addressed was: how does the floristic composition of fan habitats, species richness and life-form vary in relation to environmental change? Thirty-seven alluvial fans, randomly selected in two mainwadis(WadiFeiran andWadiDahab) were analysed quantitively. Two-way Indicator Species Analysis (TWINSPAN) classification and Canonical Correspondence Analysis (CCA) were applied in successive stages of the data analysis to describe vegetational variation in relation to physical gradients. Seven main clusters of fans were defined on the basis of environmental variation. These clusters are divided into three main groups of species richness. Species richness varied along a moisture gradient. The richest fans were the driest habitats, indicating that maximum species richness did not occur at high moisture availability. The moisture gradient is a complex gradient correlated with elevation, slope, climatic aridity, soil texture and the nature of the soil surface. Fine sand, silt plus clay and calcium carbonate showed significant differences between the internal groups and subgroups of the first and second level of the TWINSPAN classification. 相似文献
Sand-rich submarine fans are radial or curved in plan view depending on the slope of the basin floor. They occur isolated or in coalescing systems. The fans' average lateral extent measures close to 25 km and their thickness usually less than 300 m. The thickness of outer fan sequences averages around 120 m and that of middle fan successions around 160 m. Rarely reported inner fan sequences have a maximum thickness of 80 m.
The formation of sand-rich fans is closely related to tectonic activity. Their sediment is coarse-grained and compositionally immature as indicated by significant feldspar content due to close provenance and rapid transport by short rivers with a steep gradient controlled by tectonism. Tectonic activity also provides for narrow shelves making the fans relatively insensitive to sealevel changes. Formation of sand-rich fans typically occurs in restricted continental basins. The tectonic settings are highly variable. Sand-rich fans typically receive their sediment through submarine canyons which intercept sand from longshore drift and/or are fed more or less directly by regional rivers.
The type of ancient fan system (radial, curved, isolated, coalescing) may be identified through paleocurrent map plots, facies map sketches, recognition of lateral thickness variations and sediment influx centers, as well as lateral bed correlations defining the minimum fan extent.
Important in distinguishing different environments of ancient fans are detailed measured sections, their comparison and correlation. Channelized inner fan and middle fan deposits may be distinguished from the unchannelized outer fan successions through bed correlation tests which reflect their different stratigraphic architectures and bedding patterns. Bedding in outer fan deposits (lobes) is relatively simple, parallel, and regular. The lateral bed continuity is relatively high. Channel fills, especially those of middle fan distributary channels, display a complicated bedding pattern with vertical and lateral random distribution of channel fills, axial erosion, and bed convergence towards the channel margins. Channel fills exhibit only linear bed continuity. Thus, the probability in carrying out local to regional scale lateral bed correlations is almost exclusively limited to outer fan deposits.
The measured sections will help further distinguish fan environments by revealing: (1) different facies associations in outer fan sequences (mainly B, C and D) and middle fan successions (mainly A, B, C, D, and channel margin facies); (2) greater average bed and layer thicknesses in middle fan as opposed to outer fan successions (“bed” and “layer” as used herein); (3) more frequent amalgamation surfaces in channel fills than in unchannelized outer fan deposits; (4) more frequent tabular amalgamation surfaces in outer fan sections; (5) more frequent nontabular amalgamation surfaces in channel fills; and (6) more frequent dish structures in middle fan than outer fan successions.
Rarely exposed fan valley fills may be identified by coarse conglomerates. Moreover, in proximity to fan valley fills, relatively mud-rich sediments may be observed that derive from the depositional system of the basin slope. 相似文献