一种程控增益低噪声水声接收机的设计

本文介绍了一种数字测深仪的接收机的具体设计，其特点是低噪声、增益程序控制，可以输出高质量的回波信号。稍加调整，即可用作其它声纳的接收机。     

顾及局部统计特征的均值滤波方法及其应用

针对Caris软件自动滤波结果中仍存在较多异常数据点、手工剔除需要耗费较长时间的问题,提出了一种基于局部统计特征的均值滤波方法。先利用局部统计特征剔除局部异常点,再结合均值滤波方法估计格网点水深值。实验结果表明,方法处理结果与手工编辑结果水深差值中误差仅为0.121 m,而处理时长极大缩短,对工作效率的提升很大。     

Morphology of pockmarks along the western continental margin of India: Employing multibeam bathymetry and backscatter data

This study addresses the morphology of pockmarks along the western continental margin of India using multibeam bathymetry and backscatter data. Here, for the first time we have utilized the application of ArcGIS (Geographical Information System) for understanding the morphology of pockmarks from the western continental margin of India. The pockmarks observed in water depths of 145–330 m are circular, elliptical or elongated in plan-view, with an average length and width of 157 (±72) m and 83 (±19) m respectively. The average pockmark relief and perimeter are 1.9 (±0.9) m and 412 (±181) m, respectively. The pockmarks have average areas and volumes of 10 759 m² and 15 315 m³ respectively. Spatial separation that coincides with 210 m isobath divides the pockmarks into two groups with differing distributions and morphologies. These pockmarks originated from seepages of biogenic or thermogenic gas or from pore fluids from deeper sources, migrated vertically along the faults. Besides a possible structural control, the pockmark morphologies are also affected by bottom currents and/or by submarine slumping. The average acoustic backscatter strength from pockmark centre is higher (−35 dB) than the average backscatter of the total area (−40 dB), which suggests their possible linkage to the precipitation of diagenitic minerals from biodegradation of seepage material.     

High-resolution Echo-sounding and Detection of Embedded Archaeological Objects with Nonlinear Sub-bottom Profilers

Sub-bottom profilers based on nonlinear acoustics offer many advantages especially for detecting and locating embedded objects in shallow waters. They have a narrow beam in spite of small transducers and virtually no side lobes. It is possible to realize mobile low-frequent sub-bottom profilers, which transmit very short sound pulses. Excellent vertical as well as horizontal resolutions at reasonable penetrations are proven benefits of using this technique. In this paper some technical aspects are discussed and a new experimental nonlinear scanning sub-bottom profiler system is described. Results from a field trial in archaeological prospection are shown to illustrate the successful application in practice.     

Single-beam acoustic ground discrimination of shallow water habitats: 50 kHz or 200 kHz frequency survey?

The single-beam acoustic ground discrimination system QTC View, Series V, was used in the Bay of Cadiz, Southwest Spain, for the identification and mapping of the bottom acoustic diversity. The acoustic data were obtained through two successive surveys, each conducted with one of the following echo sounder frequencies: 50 kHz and 200 kHz. The performance of each survey frequency for the identification of the sedimentary gradients was analyzed. The surveys were conducted during high tide given that the majority of the surveyed area is shallower than 5 m, although depth may occasionally reach 20 m in specific areas located in a navigation channel. The acoustic data obtained at the two different frequencies were, individually, submitted to manual clustering and a final solution consisting of three acoustic classes was reached for both datasets. However, only the geographical distribution of the acoustic classes obtained with 50 kHz echo sounder frequency was coincident with the spatial distribution of the superficial sediment groups (silty medium sand, very silty fine sand and mud), identified through multivariate analysis of the grain-size data of ground-truth sediment samples. The results obtained with the 200 kHz echo sounder frequency did not match the sedimentary gradients obtained for the area surveyed, not even the separation of muddy and sandy areas.     

适用于U型阵多波束系统的高分辨底检测算法

在多波束回声声纳系统中,高分辨处理算法例如MUSIC、ESPRIT,被广泛应用于海底地形的测绘。在应用高分辨算法时,一条均匀线阵是必要条件。然而,由于系统覆盖范围/分辨率的需求以及安装空间的限制,在多波束系统中经常会采用特殊形状的接收阵列,这使得高分辨算法无法直接应用。同时回波信号的短时平稳特性使得难以估计出协方差矩阵,这也增加了高分辨算法在多波束系统中的应用难度。本文首先介绍一种基于多角度子阵波束形成的ESPRIT算法,该算法能降低高分辨算法对信噪比、样本点数和计算能力的要求。仿真表明此算法能提供更好的分辨力。接着提出一种将基于多角度子阵波束形成的ESPRIT算法与虚拟阵列变换相结合的高分辨底检测算法,并针对高分辨底检测算法在U型阵上的应用进行了探讨。计算机仿真和试验数据处理结果验证了文章所提高分辨底检测算法的有效性。