Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

Analytical solutions of one‐dimensional infiltration before and after ponding

This paper is a continuation of previous research, which obtained a convenient solution for arbitrary surface fluxes before ponding. By means of Fourier Transformation this has been extended to derive analytical solutions of a linearized Richards' equation for arbitrary input fluxes after surface saturation. Copyright © 2003 John Wiley & Sons, Ltd.     

岩体三维节点偶对分析及其应用

本文讨论了节点偶对分析的三维扩展。节点偶对分析是针对摩擦滑动节理单元的约束边界进行的序列矢量判定。在三维节理单元的分析中,几何约束和相应的力学判据极为复杂,采用节点偶对等效结合力方法才能迎刃而解。文中对三维转向节理模型的分析得到合理的结果,它表明本文所提出的方法可成功地应用于节理岩体的有限元分析。     

罗氏沼虾肌肉8种同工酶的研究

利用聚丙烯酰胺凝胶电泳技术,对罗氏沼虾(Macrobrachium rosenbergii)肌肉中的ADH,LDH,G6PDH,SOD,GDH,EST,AKP,ACP等8种同工酶进行分析,以期为其种质资源保护和开发以及遗传育种等方面的研究提供基础资料.结果表明,8种同工酶由17个基因位点所编码,其中G6pdh-1,Gdh-1和Est-3等3个基因位点具有多态现象.多态位点比例为17.6%.     

The linearisation of three dimensional drag force in random seas with current

A frame invariant linearisation method for three-dimensional drag force in random seas with current is presented. Numerical results are compared with those obtained from a commonly used linearisation method which is based on a non-frame invariant approximation to the drag force. Significant differences are discovered and the present method is found to show closer agreement with computed time histories of the true drag force.     

几种养殖鲍同工酶生化遗传的比较研究

运用聚丙烯酰胺凝胶电泳对我国主要养殖鲍(皱纹盘鲍、盘鲍及九孔鲍)12种同工酶(LDH、ME、MDH、GPI、PGM、IDH、IDDH、SOD、EST、ODH、ADH、AAT)26个基因座位进行了分析．结果表明：EST、PGM可以作为区分三种(亚种)鲍的生化遗传标记；在所分析的位点中，未发现多态现象，表明三种养殖鲍杂合子缺失严重，其主要原因可能在于哑基因、近交与自然选择。     

日本沼虾黑鳃病几种同工酶的变化与病理分析

酯酶（EST），过氧化物酶（POD），乳酸脱氢酶（LDH）和苹果酸脱氢酶（MDH）同工酶在日本沼虾中存在着组织和器官的特异性，患黑鳃病后酶带发生显著变化。在肌肉、肝脏、心脏和鳃中病虾较健康虾的LDH酶谱分别缺失了2、6、2和1条酶带，同时肝脏中新增了1条酶带；POD酶谱分别缺失了0、7、4和2酶带，肌肉中新增了2条酶带；EST酶谱分别缺失了0、2、3和1条酶带，肌肉、心脏和鳃中分别新增了1、2和2条酶带；MDH酶谱分别缺失了0、2、1和1条酶带，肌肉和脏脏中各新增了1条酶带。     

几丁糖酯原料药稳定性研究

该文建立高效凝胶渗透色谱法 (HPGPC) ,明胶比浊法 ,氧瓶燃烧法三种分析方法考察海洋硫酸多糖药物几丁糖酯的稳定性 ,采用这三种方法分别考察几丁糖酯原料药在高温、高湿、强光照射及加速条件下分子量及分布宽度、样品中硫酸根含量及样品含量的变化情况。结果表明 :三种方法均适用于几丁糖酯的稳定性考察 ,几丁糖酯在上述影响因素条件下稳定性良好     

黄鳍鲷LDH同工酶的组织特异性研究

以黄鳍鲷为材料进行两方面研究:（1）用聚丙烯酰胺凝胶电泳方法，对其肌肉，心脏，肝脏，血清，玻璃体，晶状体，脑等组织器官进行LDH同工酶分析比较，结果表明，不同组织中LDH的同工酶谱带不相同，存在着组织特异性：（2）用聚丙烯酰胺等电聚焦电泳法对其肌肉，血清的LDH同工酶进行分离 ，结果得到12－15条电泳区带，等电点范围在pH为3．65－9．58之间。