管井降水技术在多种含水介质基坑工程中的应用

结合蚌埠城市中心广场会展中心工程，介绍了管井降水技术在多种含水介质的复杂地质环境下的应用。     

地热井常见主要问题分析与研究

针对目前地热井施工技术现状及地热井使用中常见的问题，进行了较为详细的分析和研究，并就今后发展方向和建议进行了初步探讨。     

CGD-1型大口径全套管冲击抓斗的设计和应用

CGD－1型大口径全套管冲击抓斗主要是配套全套管钻机施工而研制的。该抓斗主要适用于复杂地层的施工。介绍了该抓斗的技术参数、性能特点、主要结构及试验情况。     

降水井改造为原位生产井的工艺设计及应用

为有效地扩大油页岩原位开采区域和节约油页岩原位开采的成本,需将废置的降水井改造成为原位生产井。根据降水井与原位生产井井身结构的相似性,对农安油页岩原位开采先导试验工程基地的降水井改造工艺进行了设计和优化。同时研发了偏心轮式套管割管装置及三爪式套管打捞装置用于拔管施工。工程实践证明,该工艺具有步骤简单、合理、高效以及价格低廉等特点。偏心轮式套管割管装置及三爪式套管打捞装置应用在降水井改造中,均取得理想的效果。     

Field Evaluation of the Vertical Bearing Capacity of a Screw Pretensioned Spun High-Strength Concrete Pile

This study has evaluated the vertical bearing capacity by conducting static load tests for noise-free and vibration-free screw pretensioned spun high-strength concrete (PHC) piles installed using two different methods (end-squirting shoe and pre-boring methods). Vertical bearing capacity differences seem to occur due to the displacement of soils near the external circumference of a pile, depending on the installation method. A method by which to evaluate the bearing capacity of screw concrete piles is suggested by considering the equations that already have been used to calculate the bearing capacity of piles. Based on static load tests and analysis, the pile installed using the end-squirting shoe method was assumed to be a bored pile and it was reasonable to use the equation proposed by the Japanese Geotechnical Society. At the same time, the pile installed using the pre-boring method was deemed a low soil displacement pile and so it was reasonable to apply the equations proposed for calculating the bearing capacity of the driven pile suggested by the Architectural Institute of Japan.     

四川平武银厂金矿勘探复杂地层钻进技术

四川平武银厂金矿区钻探施工中遇到漏失、缩径、岩心破碎、易孔斜和钻孔事故频发等施工难题,施工难度极大。本文结合地层特点,通过采用绳索取心液动锤、高密度低失水泥浆体系、跟管钻进等工艺技术措施,提高了钻进效率和施工质量,大幅度减少了孔内事故的发生,为顺利完成钻孔施工任务奠定了坚实的基础。     

Study on deepwater conductor jet excavation mechanism in cohesive soil

Conductor casing jetting technique has been increasingly applied in deepwater drilling. The insight into the jetting excavation mechanisms is critical in guiding a successful conductor casing jetting operation. The real- time continuous jet excavation process is simulated with the volume of fluid (VOF) multiphase method of CFD (Computational Fluid Dynamics) ANSYS Fluent calculation software in the current study. The cohesive soil is modelled by using a kind of viscous fluid with Herschel-Bulkley model. In addition, a laboratory half round nozzle jet excavation test is designed for verification by comparison of the observed jet excavation profile with the numerical results. The sensitivity parameters affecting the conductor jetting excavation mechanism in cohesive soil are thus investigated. It is found that the application of Herschel-Bulkley (HB) model for cohesive soil and the VOF method of Fluent can provide a good simulation of jet excavation process. The maximum excavation depth can be determined by the undrained ultimate bearing capacity of the circular foundation with a bearing capacity factor of 6.7. The nozzle position, jet velocity and soil strength have significantly influence on the depth and width of the jet excavation profile in conductor oblique jet.     

实际井眼条件下过套管电阻率测井响应的传输线方程正演算法

过套管电阻率测井通过测量套管壁电势实现测量地层视电阻率,不同的地层模型对过套管电阻率测井会有不同的测井响应. 在传输线方程系数中本文考虑了径向含多个界面地层的影响,对轴向（井轴方向）呈层状、径向阶跃变化地层模型,给出了电势分布递推公式,计算了过套管电阻率测井响应,绘出了测井响应曲线. 算例表明,该方法有较强的轴向地层界面分辨能力;对径向均匀地层计算结果非常接近地层模型电导率,能较好地反映实际地层特征;对高电导地层,低电导水泥环有明显的测井响应;当径向存在多个地层界面时计算结果则为径向各层电导率的综合反映,不是某一径向层的电导率;算例显示该方法有较快（算例运行时间在1s内）的计算速度.     

潜孔锤偏心跟管钻进法在卵砾石地层岩土工程勘察中的应用

卵砾石地层是钻探工程中常见的一种典型的难钻进不稳定地层。通过采用潜孔锤偏心跟管钻进法,从根本上解决了卵砾石地层难以钻进的难题,结合都匀市区岩土工程勘察实例,笔者认为潜孔锤偏心跟管钻进法是在卵砾石地层钻进中行之有效的一种钻进法。     

地层压力和大直径套管抗挤压力计算

介绍了上覆地层压力和粘土吸水膨胀对套管挤压以及大直径管受外挤力失稳破坏的计算方法。解决了现场遇到的实际问题。