双酶法制备低黏度辛烯基琥珀酸淀粉钠的工艺条件

对双酶法制备用作微胶囊壁材的低黏度辛烯基琥珀酸淀粉钠的工艺路线与工艺条件进行了研究。正交实验结果表明 ,在酯化淀粉乳质量浓度 2 0 %、每 g淀粉α 淀粉酶的用量为 6SKBU的条件下 ,影响产品性能的各因素中 ,糖化酶的用量对产品的DE值和流度的影响最大 ,各因素的重要性依次是 :糖化酶的用量、糖化酶作用时间、α 淀粉酶保温作用时间。最佳工艺条件是 :α 淀粉酶保温作用时间 4min ,每 g淀粉糖化酶用量 0 .2GAU ,糖化酶作用时间 2 .5h ,此时产品的DE值为 30 ,流度为 80左右     

Plane Symmetric Domain Wall in Lyra Geometry

In this paper general solutions are found for domain walls in Lyra geometry in the plane symmetric spacetime metric given by Taub. Expressions for the energy density and pressure of domain walls are derived in both cases of uniform and time varying displacement field β. It is also shown that the results obtained by Rahaman et al [IJMPD, 10, 735 (2001)] are particular case of our solutions. Finally, the geodesic equations and acceleration of the test particle are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

Integrated approach for identification of potential groundwater zones in Seethanagaram Mandal of Vizianagaram District,Andhra Pradesh,India

Identifying a good site for groundwater exploration in hard rock terrain is a challenging task. In hard rocks, groundwater occurs in secondary porosity developed due to weathering, fracturing, faulting, etc., which is highly variable within short distance and contributing to near-surface inhomogeneity. In such situations topographic, hydrogeological and geomorphological features provide useful clues for the selection of suitable sites. Initially, based on satellite imagery, topographical, geomorphological and hydrogeological features, an area of about 149 km² was demarcated as a promising zone for groundwater exploration in the hard rock tract of Seethanagaram Mandal, Vizianagaram District, Andhra Pradesh, India. A total of 50 Vertical Electrical Soundings (VES) were carried out using Wenner electrode configuration. An interactive interpretation of the VES data sharpened the information inferred from geomorphological and hydrogeological reconnaissance. Ten sites were recommended for drilling. Drilling with Down-The-Hole Hammer (DTH) was carried out at the recommended sites down to 50 to 70 m depths. The interpreted VES results matched well with the drilled bore well lithologs. The yields of bore wells vary from 900 to 9000 liters per hour (lph).     

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.     

165°E赤道太平洋溶解氧垂直分布异常分析

根据1986—1990中美热带西太平洋海气相互作用8个航次合作综合调查资料，分析了1987年10月赤道中西太平洋165°E（10°N－6°S）次表层水形成溶解氧最大值的原因。1986－1987年E1Nino衰退时期，该海域赤道附近在E1Nino强盛时期下沉的次表层水开始回升，短时期内形成了类似于中、高纬度海域的理化环境，使浮游生物在混合层内聚集生长，最终导致溶解氧含量在次表层出现最大值和过饱和含量。     

Using the Mellor–Yamada mixing scheme in seasonally ice-covered seas—Corrigendum to: Parameterization of vertical mixing in the Weddell Sea [Ocean Modelling 6 (2004) 83–100]

A coding error in the s-Coordinate Primitive Equation Model (SPEM) has led to misleading statements about the behaviour of the Mellor–Yamada level 2 parameterization of vertical mixing. It has been claimed that the scheme removes static instability only very slowly and preserves statically unstable stratifications for an unrealistic long time. This note corrects this statement by demonstrating that the Mellor–Yamada mixing scheme, if implemented correctly, tends to overestimate rather than underestimate vertical mixing in seasonally ice-covered seas. Similar to other mixing schemes with the same behaviour, this leads to spurious open ocean deep convection, an unrealistic homogenization of the water column, and a significant reduction of sea ice volume.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

Action of Cnoidal Waves on Vertical Walls

Based on the 2nd order cnoidal wave theory, the characters of shallow water standing waves and their action on vertical walls are studied in this paper. The theoretical expressions of the wave surface elevation in front of and the wave pressure on the vertical wall are obtained. In order to verify the theoretical results, model tests were made in the State Key Laboratory of Coastal and Offshore Engineering at DUT. For the wave surface elevation in front of the wall and the wave forces on the wall at the moment when the wave surface at the wall surface goes down to the bottom of the wave trough, the calculated results coincide quite well with the experimental results. For the wave forces on the wall at the moment when the wave surface at the wall surface goes up to the top of the wave crest, the theoretical expressions are modified by the experimental results. For the convenience of practical use, calculations are made for the wave conditions which usually occur in enginering practice by use of the inves     

柴达木盆地昆特依盐湖的地球化学演化与古气候变化

１９９０年用铀系年代学及古地磁对昆特依盐湖沉积物进行年代测定，探讨该湖区地球化学演化与古气候变化关系。结果表明，该区最老的盐层形成于早更新世晚期（大于７３０ｋａ），大量的盐类沉积则始于３００ｋａ左右；盐湖沉积物中元素含量变化主要受古盐度、矿物、类质同象和吸附控制；沉积物水溶Ｆ／Ｃｌ比值与古盐度成反比关系；该湖２０００ｋａ以来的古环境演变：盐层形成于干冷、偏酸性的氧化环境，泥岩层形成于湿暖、偏碱性的