Second-order resonance of sloshing in a tank

Sloshing in a two-dimensional rectangular tank in horizontal motion is analysed based on the velocity potential theory. It is found that even when the first-order excitation is away from all the natural frequencies of the tank, second-order resonance can still occur when the sum-frequency or the difference-frequency is equal to one of the natural frequencies corresponding to the even mode. However, such resonance is not excited when the sum or difference frequency is equal to the natural frequency of an odd mode.     

An experimental investigation into the influence of the damage openings on ship response

Ship motions after damage are difficult to evaluate since they are affected by complex phenomena regarding fluid and structures interactions. The possibility to better understand how ship behavior in damage is influenced by these phenomena is important for improving ship safety, especially for passenger vessel.In this paper an experimental campaign is carried out on a passenger ferry hull, to show the effects of the water dynamics across damage openings on ship motions. Novel aspects of this research include the study of the effects of the damage position on the ship roll response. The study is carried out for still water and for beam regular waves at zero speed.Results from the experiments carried out underline that the roll behavior of a damaged ship is affected by the position of damage opening and not only by its size. Assuming the same final equilibrium conditions after flooding but characterized by different damage openings it is possible to observe how motions RAOs and roll decay characteristics modify according to the opening locations.     

Application of an improved semi-Lagrangian procedure to fully-nonlinear simulation of sloshing in non-wall-sided tanks

The semi-Lagrangian procedure is widely used for updating the fully-nonlinear free surface in the time domain. However, this procedure is only available to cases when the body surface is vertical near the waterline. Present study introduces an improved semi-Lagrangian procedure which removes this ‘vertical-wall’ limitation. Coupling with the boundary element method, the improved semi-Lagrangian procedure is applied to the simulation of fully-nonlinear sloshing waves in non-wall-sided tanks. From the result comparison with the open source CFD software OpenFOAM, it is confirmed that this numerical scheme could guarantee a sufficient accuracy. Further series studies on 2D and 3D fully-nonlinear sloshing waves in wedged tanks are performed. Featured phenomena are observed which are distinct from those in wall-sided tanks.     

Numerical simulation of sloshing waves in a 3D tank based on a finite element method

The sloshing waves in a three dimensional (3D) tank are analysed using a finite element method based on the fully non-linear wave potential theory. When the tank is undergoing two dimensional (2D) motion, the calculated results are found to be in very good agreement with other published data. Extensive calculation has been made for the tank in 3D motion. As in 2D motion, in addition to normal standing waves, travelling waves and bores are also observed. It is found that high pressures occur in various circumstances, which could have important implications for many engineering designs.     

A set of canonical problems in sloshing. Part 0: Experimental setup and data processing

In a series of attempts to research and document relevant sloshing type phenomena, a series of experiments have been conducted. The aim of this paper is to describe the setup and data processing of such experiments. A sloshing tank is subjected to angular motion. As a result pressure registers are obtained at several locations, together with the motion data, torque and a collection of image and video information. The experimental rig and the data acquisition systems are described. Useful information for experimental sloshing research practitioners is provided. This information is related to the liquids used in the experiments, the dying techniques, tank building processes, synchronization of acquisition systems, etc. A new procedure for reconstructing experimental data, that takes into account experimental uncertainties, is presented. This procedure is based on a least squares spline approximation of the data. Based on a deterministic approach to the first sloshing wave impact event in a sloshing experiment, an uncertainty analysis procedure of the associated first pressure peak value is described.     

Viscosity and nonlinearity effects on the forces and waves generated by a floating twin hull under heave oscillation

Nonlinear hydrodynamics of a twin rectangular hull under heave oscillation is analyzed using numerical methods. Two-dimensional nonlinear time-domain solutions to both inviscid and viscous problems are obtained and the results are compared with linear, inviscid frequency-domain results obtained in [26] to quantify nonlinear and viscous effects. Finite-difference methods based on boundary-fitted coordinates are used for solving the governing equations in the time domain [2]. A primitive-variables based projection method [6] is used for the viscous analysis and a mixed Eulerian–Lagrangian formulation [11] for inviscid analysis. The algorithms are validated and the order of accuracy determined by comparing the results obtained from the present algorithm with the experimental results of Vugt [22] for a heaving rectangle in the free surface. The present study on the twin-hull hydrodynamics shows that at large and non-resonant regular frequencies, and small amplitude of body oscillation, the fluid viscosity does not significantly affect the wave motion and the radiation forces. At low frequencies however the viscosity effect is found to be significant even for small amplitude of body oscillation. In particular, the hydrodynamic force obtained from the nonlinear viscous analysis is found to be closer to the linear inviscid force than the nonlinear inviscid force to the linear inviscid force, the reason for which is attributed to the wave dampening effect of viscosity. Since the wave lengths generated at smaller frequencies of oscillation are longer and therefore the waves could have a more significant effect on the dynamic pressure on the bottom of the hulls which contribute to the heave force, the correlation between the heave force and the wave elevation is found to be larger at smaller frequencies. Because of nonlinearity, the wave radiation and wave damping force remained nonzero even at and around the resonant frequencies – with the resonant frequencies as determined in [26] using linear potential flow theory. As to be expected, the nonlinear effect on the wave force is found to be significant at all frequencies for large amplitude of oscillation compared to the hull draft. The effect of viscosity on the force, by flow separation, is also found to be significant for large amplitude of body oscillation.     

Experimental hydrodynamic investigation of a fixed offshore Oscillating Water Column device

Oscillating Water Column (OWC) is one of the pioneer devices in harnessing wave energy; however, it is not fully commercialized perhaps due to the complicated hydrodynamic behavior. Previous studies are significantly devoted to OWC devices located in nearshore and coastal regions where incident wave energy would experience dissipation more than offshore. In this paper, a 1:15 scaled fixed offshore OWC model is tested in a large towing tank of National Iranian Marine Laboratory. Wave spectrum shape effect on the efficiency of the OWC model is addressed. Moreover, the paper investigates the effects of the geometric and hydrodynamic factors on OWC device efficiency and uncovers new points in nonlinear interaction occurring inside the chamber; i.e. sloshing. The results indicate that shape of the spectrum inside the chamber is affected by the type of incident wave spectrum, especially for long waves. Pierson–Moskowitz spectrum leaded to higher efficiency rather than JONSWAP spectrum at longer incident wave periods. According to efficiency analysis, increasing wave height may lead to air leakage from the chamber followed by vortex generation, which is a reason for decreasing the efficiency of the OWC device. Furthermore, no shift in the resonant period of the OWC model, due to wave height increase, was observed at the opening ratios equal or smaller than 1.28%. Spectral analysis of water fluctuation inside the OWC chamber illustrates two modes of sloshing. The first mode can be seen at short period waves while the second mode is visible at long period waves. The sloshing modes approximately vanish by increasing draft value.     

Numerical evaluation of hydrodynamic damping due to the Upper Mounted Baffles in real scale tanks

In this study, the hydrodynamic damping effects of Upper Mounted Baffles (UMB) used in the real scale liquid tanks are numerically investigated. In this regard, the paper follows three main purposes. First, the accuracy of the analytical model developed by the author is examined for full scale applications. In this regard, the tanks equipped by UMB with various dimensions and locations are numerically analyzed in free vibration mode. Then, the numerical results are compared with an analytical solution results, and the validity of the analytical formulation for using in real applications is discussed. Second, the seismic efficiency of UMB is considered, and the reduction of the sloshing wave height due to the presence of the UMB is examined under several earthquake excitations. Finally, a seismic design procedure is proposed to evaluate the effect of UMB on the suppression of sloshing in a liquid tank, and its predictions are compared with the results of numerical analysis.     

A probabilistic assessment of design sloshing pressure time histories in LNG tanks

The violent motion (sloshing) of liquefied natural gas (LNG) in cargo tanks has attracted significant attention. Transformations of the LNG market have led to the increased transport of LNG in partially filled tanks, but established technology is mainly based on engineering experience with completely filled containers. This paper investigates a large sample of sloshing pressure measurements. It focuses on the magnitude of individual sloshing impact events, and their associated temporal and spatial patterns. The durations of these impacts are comparable to the natural frequency of an LNG container wall, so the details of their time histories are important in determining the structural response. Experiments are performed on tanks with high (92.5%) and low (30%) filling levels, for various wave headings. The common post-processing approach of representing impact pressure histories by a triangular profile is studied, and an alternative approach is presented. Two statistical models are used to describe the distribution of maximal pressures in sloshing impacts: a three-parameter Weibull model and a generalized Pareto model. The latter is found to be of questionable utility due to small sample sizes. It is observed that for low filling levels the sloshing impacts are of greater magnitude, having longer durations, smaller ratios of rise time to duration, and larger spatial extents. All these factors should in principle increase the structural response.     

调频液体阻尼器(TLD)的等效力学模型研究

本文根据流体力学理论,建立了圆柱形ＴＬＤ中晃动液体的势流场,并从液体晃动的动力效应等效原则出发,导出了晃动液体的等效力学模型,并阐明其适用范围。文量计算的结果表明,在工程应用中,仅用ＴＬＤ的一阶晃动等效力学模型就能满足工程需要。