石英砂扫描电镜在漓江“泥砾”成因中的应用

本文根据扫描电镜对从漓江河谷钻孔中的泥砾层取得的481粒石英砂表面形态特证研究结果:石英砂多数颗粒保持棱角状外形并遭受不同程度的磨蚀,具阶状贝壳断口,平直或弧形刮削面和多向擦痕,沿解理面破碎呈“V”字形沟和撞击碟形坑,以及微溶蚀孔、隙、蜂窝状溶孔群和SiO_2再沉积等表面形态结构特征。认为它是在第四纪古地理湿热气候条件下泥石流沉积的产物,物源可能来自境内或周边的泥盆系砂岩和境外的花岗岩。     

Tantulocarida (Crustacea: Maxillopoda): A New Taxon from the Temporary Meiobenthos1

Abstract. Two new genera of Tantulocarida are described from the Ligurian deep sea (Western Mediterranean) off Corsica. Xenalytus scotophilia is referred to the Microdajidae and differs from Microdajus GREVE in thoracopodal segmentation as well as in the presence of coupling spines on thoracopod 6 and longitudinal lamellae on the cephalic shield. Aphotocentor styx is placed in the Deoterthridae and holds an intermediate position between Deoterthron BRADFORD & HEWITT and Boreotantulus HI/YS & BOXSHALL. Some aspects of cephalon internal structure are described for the first time and give a possible explanation for the mechanism of stylet protrusion. The external structures of the oral disc are described using SEM. The discovery of well-developed muscles in the trunk and thoracopods is discussed in the light of the benthic phase the tantulus passes through. The boundary between the thorax and abdomen in the tantulus is reinterpreted, corroborating the 5–7-5 bodyplan of the hypothetical urmaxillopodan as found in the Upper Cambrian Skaracarida and possibly also Dala peilertae MOLLER. Some aspects related to dispersal, infection, and feeding are reinterpreted or approached from a different perspective. SEM of Microdajus langi GREVE gives evidence that the tantuli hatch via a conspicuous slit located at the posterior end of the female trunk sac. A worldwide key to the tantulocaridan families and genera is given, and distributional records are compiled. It is suggested that Tantulocarida might be common representatives of the temporary meiobenthos and that their present species number represents only the tip of the iceberg.     

珠江口沉积物酸挥发性硫化物与重金属生物毒性的研究

研究了2003年10月采于珠江口5个站位的沉积物剖面酸挥发性硫化物(AVS)和同时提取的重金属(SEM:Pb,Zn,Cu,Cd,Ni)。其中,站位1、2位于中滩,其沉积物的AVS含量变化范围较小,为0.25—4.06μmol.g-1;站位3、4位于西滩,其沉积物的AVS含量变化范围较大,为0—26.09μmol.g-1。中滩和西滩沉积物的AVS含量均随深度增加。西滩表层沉积物的AVS含量接近于零,这可能与该水域较强的底层流和沉积物的再悬浮作用有关。站位5位于珠江口外侧,其表层沉积物的AVS含量相对较高,且垂向变化较小,可能是还原性沉积物间歇性再悬浮后重新沉积的结果。站位1、2和5沉积物中同时提取的重金属含量大体在0.95±0.2μmol.g-1范围内,随深度增加略呈下降趋势;而西滩沉积物重金属含量相对较高,为1.43—2.42μmol.g-1,且在一定深度范围内随深度增加呈明显下降的趋势,表明珠江口西滩沉积物中的重金属污染有加重的趋势。对AVS/SEM摩尔比值和单个金属的毒性效应研究显示,珠江口内尤其是西滩的表层沉积物存在重金属污染,对其中生活的底栖生物具有潜在的毒性效应。     

中国对虾丝状细菌的扫描电镜研究

本文应用扫描电镜研究了中国对虾丝状细菌的结构,附着方式及其对对虾的危害和与环境的关系。     

Zooplankton Feeding Ecology: Contents of Fecal Pellets of the Cyclopoid Copepods Oncaea venusta, Corycaeus amazonicus, Oithona plumifera, and O. simplex from the Northern Gulf of Mexico

Abstract. In situ feeding habits of the cyclopoid copepods Oncaea venusta, Corycaeus amazonicus, Oithona plumifera , and O. simplex were investigated by scanning electron microscope examination of fecal pellets, the contents of which reflected copepod gut contents upon capture. Peilet contents were compared with assemblages of phytoplankton present in surface waters at times of copepod collection. All samples were from the northern Gulf of Mexico. All four copepods fed upon phytoplankton and O. venusta also ingested other crustaceans. Dominant components of fecal pellets generally did not mirror those of available phytoplankton assemblages. In some cases, O. venusta ingested primarily larger-sized particles even when these were not most abundant, and in other cases it did not ingest large cells even when they were present in bloom concentrations. The presence of small (< 2–5 urn diameter) centric diatoms in O. venusta pellets suggests the possibility of feeding by mechanisms other than suspension or raptorial feeding. Limited observations suggest that C. amazonicus and O. plumifera may feed raptorially on larger particles even when these are not particularly abundant, and that the small O. simplex (< 500 nm total length) feeds mainly upon nanoplankton. It appears that cyclopoid feeding mechanisms are complex, and likely more so than those of many calanoids.     

Vertical distribution of the macrobenthic community and its relationships to trace metals and natural sediment characteristics in the lower Douro estuary, Portugal

Vertical distribution (0–15 cm) of the macrobenthic community and its relationships to natural sediment characteristics and trace metal contents and bioavailability were studied at five locations in the lower Douro estuary, Portugal. An analysis of vertical metal distribution, for the interpretation of anthropogenic impact on the estuarine sediments, was also investigated. Sediment characterisation included organic matter, grain size, metals (Al, Fe, Cu, Pb, Cr, Ni, Cd, Zn and Mn), acid volatile sulphide (AVS) and simultaneously extracted metals (SEM). The macrobenthic community had low diversity (14 species), was dominated by small size opportunists and seemed to be controlled mainly by natural factors such as grain size distribution, Al and Fe contents and sediment depth. The vertically heterogeneous distribution of macrobenthic community appears to affect redox status of the sediments and consequently metal bioavailability. Despite anthropogenic contamination in terms of Zn, Cu, Pb, Cr and Ni having already been detected in the north bank, the analysis of vertical distribution was essential for the identification of current anthropogenic contamination in terms of Zn, Pb and Cd in the south bank.     

Plerospheres and their role in reduction of emitted fine fly ash particles

Particles, less than PM10 in size, emitted from the stack of pulverized coal-fired power plants are of environmental concern since they can easily enter the human respiratory track. These fine particles are examined by Scanning Electron Microscope/Electron Dispersive Spectrometry （SEM/EDX）. Plerospheres are found in fly ash and are particles containing smaller particles formed during combustion of coal. The large plerospheres 〉50 μm mostly are present in ESP fly ash, indicating that they are effectively capturing fine particles and reducing their stack emission.     

Characterization of cristobalite in ash and dome rock from the Soufriere Hills volcano, Montserrat： Implications for respiratory health hazards

A link between the inhalation of respirable silicas （SiO2） and respiratory diseases such as silicosis is widely recognized. Ash from dome collapse eruptions on Montserrat has been found to contain high levels （〉20%） of silicas in the form of cristobalite, tridymite, quartz and/or amorphous silica. The toxicity of these silica polymorphs varies widely. Cristobalite and quartz （tridymite less well established） are viewed as carcinogenic to humans whereas amorphous silica generally shows a reduced biological response. In assessing the potential health effects of volcanic ash particulates it is vital to determine the types and concentration of silicas as well as their size （respirable fraction）, shape and surface properties. The aim of this study is to develop methods to assess potentially toxic respirable airborne silicas in the dome collapse ash （applicable to a range of ash types） and to develop a model to predict the levels and types of respirable silicas from future eruptions. The model is being developed by comparing dome rock with related ash from a series of previous eruption events. Mineralogical assessment using conventional scanning X-ray diffraction （XRD） was hampered by difficulties in differentiating characteristic peaks for cristobalite and tridymite in complex multi-component ash samples （containing high levels of plagioclase）. These difficulties have been largely overcome using an Enraf-Nonius PDS120 diffractometer with curved （120 degrees 20） position sensitive detector （PSD）. The determination of size, shape and elemental characteristics of ash particulate and dome rock samples has been carried out using automated analytical scanning electron microscopy. The quantification of mineral proportions using PSD-XRD was highly successful with an accuracy of 1 to 2 wt%. However, the determination of phase proportions using automated analytical SEM was problematic due to scattering effects and the multiphase nature of many of the particles.     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.     

A scanning electron microscope study of the effects of dynamic recrystallization on lattice preferred orientation in olivine

Effects of dynamic recrystallization on lattice preferred orientation (LPO) in olivine were investigated through the combination of two SEM-based techniques, electron backscattered diffraction (EBSD) technique for crystallographic orientation measurement and backscattered electron imaging (BEI) for dislocation observation. Samples are experimentally deformed olivine aggregates in simple shear geometry. In the sample deformed at T=1473 K and high stresses (480 MPa), only incipient dynamic recrystallization is observed along grain-boundaries. Orientations of these small recrystallized grains are more random than that of relict grains, suggesting an important role of grain-boundary sliding at this stage of recrystallization. In the sample deformed at T=1573 K and low stress (160 MPa), dynamic recrystallization is nearly complete and the LPO is characterized by two [100] peaks. One peak is located at the orientation subparallel to the shear direction and is dominated by grains with high Schmid factor. The other occurs at high angles to the shear direction and is due to the contribution from grains with low Schmid factor. Grains with high Schmid factor tend to have higher dislocation densities than those with low Schmid factor. Based on these observations, we identify two mechanisms by which dynamic recrystallization affects LPO: (1) enhancement of grain-boundary sliding due to grain-size reduction, leading to the modification of LPO caused by the relaxation of constraint for deformation; (2) grain-boundary migration by which grains with lower dislocation densities grow at the expense of grains with higher dislocation densities. Based on the deformation mechanism maps and stress versus recrystallized grain-size relation, we suggest that the first mechanism always plays an important role whereas the second mechanism has an important effect only under limited conditions.