Impact of the sampling duration on the uncertainty of averaged velocity measurements with acoustic instruments

Average velocity in streams is a key variable for the analysis and modelling of hydrological and hydraulic processes underpinning water resources science and practice. The present study evaluates the impact of the sampling duration on the quality of average velocity measurements acquired with contemporary instruments such as Acoustic Doppler Velocimeters (ADV) an Acoustic Doppler Current Profilers (ADCP). The evaluation combines considerations on turbulent flows and principles and configurations of acoustic instruments with practical experience in conducting customized analysis for uncertainty analysis purposes. The study sheds new insights on the spatial and temporal variability of the uncertainty in the measurement of average velocities due to variable sampling durations acting in isolation from other sources of uncertainties. Sampling durations of 90 and 150 s are found sufficient for ADV and ADCP, respectively, to obtain reliable average velocities in a flow affected only by natural turbulence and instrument noise. Larger sampling durations are needed for measurements in most of the natural streams exposed to additional sources of data variability.     

SAMPLING REMOTELY SENSED IMAGERY FOR STORAGE,RETRIEVAL, AND RECONSTRUCTION*

A major difficulty in remote sensing is handling the many data from sensors aboard aircraft and satellites. In this paper we identify an optimal procedure for sampling remotely sensed data before their storage or on their retrieval. The procedure depends on spatial correlation in the scene and uses kriging to estimate values that have been lost. An example in which data from an airborne multispectral scanner could be diminished to only about one tenth without serious loss of precision illustrates the method.     

FARMLAND AND URBAN AREA DYNAMICS MONITORING INCHINA USING REMOTE SENSING AND SPATIALSTATISTICS METHODOLOGY

1 INTRODUCTIONGlobal change research involves much geo-objectsand geo-process, such as climate and environmentalchange, substance and energy cycling, land-use/land-cover change (LUCC), interactivity between human and nature, etc.. So it need cooperation frommany research communities including international research programs groups such as IGBP (InternationalGeosphere-Biosphere Programme IPCC (Intergovemmental Panel on Climate Change), IHDP (InternationalHuman Dimension Program o…     

雾化进样石墨炉原子吸收光谱法的研究 Ⅰ.直接雾化进样装置及其性能

介绍一种自行设计和加工的直接雾化石墨炉进样装置的结构、工作原理和操作方法。该装置由微机控制与石墨炉加热程序同步工作,可以实现自动控制和自动测量。对雾化进样石墨炉分析的仪器参数和实验条件进行了研究和选择。结果表明,该装置与石墨炉结合具有自动化程度高、重现性好、样品利用率高和分析速度快等特点。     

原子钟噪声的蒙特卡络模拟方法

讨论了原子钟噪声的蒙特卡络模拟方法．具体过程是：先产生模拟所需的正态分布随机数，从实际钟的阿仑方差估算出噪声电平，然后用１组递点函数产生高质量的模拟钟时差的随机序列．在对１台商品铯钟进行具体模拟后，给出了真实数据与模拟值的阿仑方差之问的相符程度，最后对实际问题进行了分析．     

Sensitivity analysis of support safety factor for predicting the effects of contributing parameters on roof falls in underground coal mines

Roof falls accounted for 18.18% of all fatal accidents in Indian coal mines, contributing about 35.29% of all fatal accidents in below-ground operations in 2005. The support safety factor, always preferred in support planning and design of underground coal mines, may be an important predictor for roof falls. In this paper, geotechnical data were collected from 14 roof fall incident places in an underground coal mine, located in the Eastern India, which has bord and pillar method of workings. The mean value of probabilistic support safety factor for the case study mine was found to be 1.24. However, the probability, of the estimated support safety factor of less than or equal to one, was found to be 0.246. Sensitivity analysis was conducted to analyze the effects of the contributing parameters on support safety factor and the likelihood of the roof fall. The multi-variate regression analysis was carried out for the data generated by Monte Carlo method to correlate the contributing factors to support safety factor. It ranked gallery width as the first parameter to control the support safety factor.     

Delineation of groundwater protection zones by the backward particle tracking method: theoretical background and GIS-based stochastic analysis

The backward particle tracking method, an effective and powerful tool that can be used to delineate groundwater protection zones, is presented. The theoretical background and insights on the applicability of this method are provided. Moreover, the present work enriches the backward particle tracking method with an uncertainty analysis concerning the porosity values, applying a Monte Carlo (MC) approach, coupled with the use of geographical information systems (GIS). As an application example, a wellfield in the Komotini area, Greece, is investigated. The present study may serve as a potential guideline for wellfield delineation, particularly in areas like Greece where lack of data related to the hydrogeological system is often a problem.     

全球地球化学填图——历史发展与今后工作之建议

区域性与国家性的地球化学填图已取得进展,如何在可期待的未来以极低密度采样获得周期表内大多数元素在全球的分布,有赖于对填图理念的更新及采样介质、采样部署与采样方法研究的进展。英国Webb等发现在数平方千米至数十平方千米汇水盆地之河口采集水系沉积物样品,其分析结果可大致逼近其上游汇水盆地内土壤中元素之平均值。挪威及中国的研究工作表明在更大河流(其汇水盆地达数百、数千以至数万平方千米)的河口采样,这一规律依旧适用。看来,这种分形规律还可进一步延展至世界上一些汇水盆地达数十万至百万以上平方千米的主要入海河口,但这方面尚需作更多的研究。在这种新的填图理念指导下,提出了为实现全球地球化学填图的短期研究与试点计划和长期全面实现之规划。