Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Assessing degradation capability of aerobic indigenous microflora in PAH-contaminated brackish sediments

A study was conducted to determine polycyclic aromatic hydrocarbons (PAHs) distribution and microbial population changes in brackish sediments from an Italian lagoon included in the Ramsar List of Wetlands of International Importance. The presence and level of PAH-degrading bacteria were estimated by the most probable number (MPN) enumeration technique, whereas degradation capability towards target compounds was checked against loss of spiked PAHs (Phenanthrene, Anthracene and Fluoranthene) in MPN tubes after incubation in optimal conditions. Chemical analyses and microbiological counts suggested a potential for PAHs biodegradation by natural occurring populations of sediment microorganisms, thus indicating an "optimal range" in sediment PAHs concentrations, outside of which the natural selection of the indigenous microflora did not occur. The MPN procedure here described, provided an effective and reliable way to simultaneously determine microbial population densities and subsequent confirmation of the biodegradation capability of sediment indigenous microflora when exposed to laboratory and environmental concentrations of PAHs.     

一类典型模糊阵及其在传递闭包化简中的应用

本文研究模糊矩阵传递闭包的化简问题。通过定义 1类典型阵 ,给出传递闭包能够进一步化简的充要条件 ,为网络最大流分析提供了 1种新的模式。     

Optimum Sample Size to Detect Perturbation Effects: The Importance of Statistical Power Analysis – A Critique

Abstract. The current article describes statistical power analysis as an efficient strategy for the estimation of the optimum sample size. The principle aim is constructively to criticise and enrich the results presented by Mouillot et al. (1999) , who estimate the optimum sample size for evaluating possible perturbations. The authors did not make any reference to statistical power analysis, even though their objective clearly went beyond a simple stock evaluation to assess management strategies in a particular marine ecosystem. Surprisingly, they proposed (a priori) an ANOVA design to test a hypothesis considering both space and temporal scales. However, the authors did not cover important topics related with power analysis and the precautionary principle, both used into environment impact assessment programmes for marine ecosystems. Based on their results and on statistical power analysis, it is demonstrated that the variability (dispersion statistics), a key factor they used to estimate the sample size, is less relevant than the magnitude of perturbation (effect size). Therefore, a greater effort must be devoted to estimate the effect size of a particular phenomenon rather than a desired variability.     

一维扩散方程整体观测资料下的初值变分同化反演

本文考虑一维扩散方程的反问题,利用变分同化方法通过观测资料来确定方程中的未知初值,通过分析观测误差对于初值误差的影响,证明变分同化初值收敛于原问题的真实参数,并得到了参数的收敛精度。同时将得到的初值代入预报模式中,得到预报解,并分析了预报解的收敛性和预报误差。     

煤炭资源勘查误差理论研究

对煤炭资源勘查资源量与客观物质量之间差值的误差理论探讨,提出误差由真值误差、系统误差和离差3个基本部分组成,其中真值误差是不可消除的观测误差、系统误差是控制网度所决定的准确度标准、而离差是由地质构造及矿床形态的多解性产生的资源量波动。在此基础上,构筑了一个关于误差的数学模型,最后应用误差理论对现行勘查工作中常见的错误进行分析,并就如何避免错误及减少误差提出了见解。     

CPⅢ测量数据处理系统开发若干关键技术研究

本文首先介绍了无砟轨道的相关内容,指出CPⅢ测量数据处理是整个建设中的关键,提出系统开发的总体目标与要求且设计了系统总体结构,详细阐述了系统开发中涉及的关键技术与基本理论,文中最后结合具体工程实例验证系统开发成果。     

New data on the present-day active fluid regime of fractured zones of crystalline basement and sedimentary cover in the eastern part of Volga-Ural region

The study area is the South Tatarstan Arch located in the Volgo-Ural Region, which is an enigmatic crustal segment occupying one third of the East European Platform. Monitoring studies have shown that fluid discharge processes are still active and time-dependent. This paper presents an integrated review of the geological, geophysical, hydrochemical and geochemical studies of the crystalline basement of Tatarstan. These studies are based on the stratigraphic and compositional schemes within the crystalline basement, the drilling of deep wells, the geodynamic activity of the fractured zones of the crystalline basement and the presence of fluids therein. Furthermore, the changes in the chemical composition of the basement waters are taken into account.     

Permanent Scatterers for landslide investigations: outcomes from the ESA-SLAM project

Within the SLAM project (Service for Landslide Monitoring), launched in 2003 by the European Space Agency (ESA) the Permanent Scatterers (PS) technique, a multi-image interferometric approach, coupled with the interpretation of aerial-photos and optical satellite images, was carried out for landslide investigations. The PS analysis was applied at a regional scale as support for landslide inventory mapping and at local scale for the monitoring of single well-known slope movements. For the integration of the PS measurements within a landslide inventory the Arno river basin (Italy) was chosen as test site for the presence of a high number of mass movements (to date about 300 areas at high landslide risk and more than 27,000 individual landslides mapped by the institutional authorities). About 350 SAR images have been interferometrically processed by means of the PS technique, with the detection of about 600,000 PS. The use of optical images contributed spatial meaning to the point-wise information provided by the PS, making it easier to identify terrain features related to slope instability and the landslide boundaries. Here we describe the employed methodology and its impact in the updating of a preexisting landslide inventory. 6.8% of the total number of landslides were characterized by ground displacement measurements from the PS: 6.1% of already mapped landslides and 0.8% of new unstable areas detected through the PS analysis. Moreover, most of the PS are located in urban areas, showing that the proposed methodology is suitable for landslide mapping in areas with a quite high density of urbanization, but that over vegetated areas it still suffers from the limitations induced by the current space-borne SAR missions (e.g. temporal de-correlation). On the other hand, the use of InSAR for the monitoring of single slow landslides threatening built-up areas has provided satisfactory results, allowing the measurement of superficial deformations with high accuracy on the landslide sectors characterized by a good radar reflectivity and coherence.     

Sediment-Based Study of the Effects of Decreasing Mine Water Pollutionon a Heavily Modified, Nutrient Enriched Lake

Ni and Cu mining and ore processing in Hitura, Western Finland, have resulted in emissions of metal-rich wastewaters into the nearby Kalajoki River since 1970. The wastewaters are discharged into the river 3 km upstream from the eutrophic Lake Pidisjärvi, which is a widening of the river by the town of Nivala. The water level of the lake was elevated by 1.5 m and the extensive macrophyte stands were cut in 1979, profoundly changing the environmental conditions. The effects of the decreasing metal emissions and nutrient concentrations since 1979 on the now open 3.9 km² lake were studied with paleolimnological techniques. A 2-m sediment core was taken from the lake in February 2004 and analysed for sediment chemistry and diatom assemblages. At the coring site, 13 cm of sediment had been deposited since 1979, on top of a bed of undecomposed macrophyte remains. When the sediment chemistry was compared with records of decreasing metal loading since 1979, no correlation was found because post-depositional mobility and changes in sediment characteristics affect the sediment metal profiles. Thus, the reduced emissions from the mine and the lower lake water phosphorus levels have not caused a corresponding decrease in sediment metal and P concentrations. However, both of these environmental variables accounted for a statistically significant percentage of variation in the sedimentary diatom assemblages in a redundancy analysis constrained to a single variable. This relationship persisted for Ni loading even in a partial analysis, while the importance of nutrients was confirmed by the good correlation between diatom-inferred and measured P concentrations. The results suggest that reductions in metal and nutrient loading have had an effect on the algal assemblages even though the sediment concentrations of Ni, Cu or P have not decreased.