便携式电子地图设计中需解决的几个问题

软性显示器和投影技术超微型化的发展,使得电子地图有足够的空间满足便携式电子地图的设计需求,本文通过介绍几种便携式材质的特性,提出便携式电子地图设计中需解决的几个硬件技术问题。     

海洋立管复模态动力特性分析

考虑阻尼的影响,研究海洋立管的动力特性。通过分析管内流体及管外海洋环境荷载的共同作用,建立海洋立管涡激振动偏微分方程,进而得到立管动力特性方程,用复模态分析法求解动力特性方程得到立管考虑阻尼的自振频率。算例计算表明:考虑阻尼的立管自振频率略小于不考虑阻尼的立管自振频率;立管的自振频率随着内流流速的增加而减小,但内流流速不大时,影响较小;管道长度对立管的自振频率影响较大。     

海洋纤维增强热塑性立管极限承载拉力预测方法

海洋新型纤维增强热塑性立管因其可盘卷、耐腐蚀、耐疲劳和轻质化等优点,在深水油气开发中应用前景十分广阔。热塑性立管具有复合材料的各向异性、受力耦合效应及复杂的本构关系,且承受浮体运动和复杂海洋环境载荷,其失效模式尚未明确。针对轴对称载荷作用下纤维增强热塑性立管极限承载力问题,进行热塑性管稳态热传导和热应力的理论推导,求解了稳态温度和应力分布,首次给出了在任意温度载荷作用下管体径向位移的解析解,并直接求解其径向、轴向、环向和剪切应力。采用各向同性层Von Mises和各向异性层最大应力（Max Stress）准则或Tsai-Hill准则判定热塑性管的失效,基于应力分布、失效准则和二分法计算了热塑性管的极限载荷。温度载荷、纤维铺设角度和径厚比对管道的应力分布影响显著。不同温度载荷会改变失效指数沿径向的变化趋势,增大轴向拉力将增大热塑性管的失效指数,选用不同的失效准则在管体失效判定上存在一定的差异。热塑性管温度越低、纤维铺设角越小及径厚比越大,管道对轴向拉伸载荷的承载能力越强。     

Flexible membranes anchored to the ground for slope stabilisation: Numerical modelling of soil slopes using SPH

An alternative modelling for flexible membranes anchored to the ground for soil slope stabilisation is presented using Smoothed-Particle Hydrodynamics to model the unstable ground mass in a soil slope, employing a dynamic solve engine. A regression model of pressure normal to the ground, q_sim, and also membrane deflection, f_sim, have been developed using Design of Experiment. Finally, a comparison between the pressure obtained from numerical simulation and from a limit equilibrium analysis considering infinite slope has been carried out, showing differences in the results, mainly due to the membrane stiffness.     

Experimental investigation of the effects of the coverage of helical strakes on the vortex-induced vibration response of a flexible riser

The effects of different helical strake coverage on the vortex-induced vibration (VIV) of a model flexible riser were studied experimentally, with the aim of further improving the understanding of VIV responses. Uniform and linearly sheared currents were simulated to study response parameters such as non-dimensional displacement, fatigue damage, suppression efficiency, and the comprehensive evaluation is further studied. Test results of the bare model for a uniform current showed that the behavior of both the standing wave and traveling wave dominated VIV displacement. However, for a linearly sheared current, traveling wave behavior dominated VIV displacement in the high-velocity range. The results of the straked model tests indicated that the response was strongly dependent upon the amount of coverage of helical strakes. The flexible riser with 75% strake coverage gave the best comprehensive evaluation in a uniform current, and 50% strake coverage gave the best comprehensive evaluation in a linearly sheared current.     

国外深水钢悬链线立管研究发展现状

介绍国外在新型深水立管系统--钢悬链线立管关键技术方面的研究发展现状,论述浮体一、二阶运动对钢悬链线立管疲劳寿命的影响、浮体升沉运动对钢悬链线立管触地点疲劳寿命的影响;钢悬链线立管与海底相互作用机制的实验研究及结果;钢悬链线立管涡致振动与疲劳的研究现状.并简要论述钢悬链线立管触地点问题的研究结论.     

A hybrid discrete–finite element model for numerical simulation of geomaterials

A hybrid discrete–finite element model is introduced for simulation of mechanical behavior of geomaterials. The soil or rock is modeled as a system of discrete balls that interact through normal and shear springs. The balls can be bonded at the contact points to withstand the applied deviatoric stresses. The important feature of this model is that the confining walls that can be imagined for example as the surrounding membrane or the mold in a physical test are modeled by deformable finite elements. This allows simulation of laboratory test features more realistically compared to the situations where the surrounding walls are rigid. The relationships between micro- and macro-properties are investigated in this paper as well. These relationships and the corresponding curves are helpful tools in calibration of the numerical model for the macroscopic elastic properties.     

Experimental Study on Coupled Cross-Flow and in-Line Vortex-Induced Vibration of Flexible Risers

In this work, we study the coupled cross-flow and in-line vortex-induced vibration （VIV） of a fixedly mounted flexible pipe, which is free to move in cross-flow （ Y- ） and in-line （ X- ） direction in a fluid flow where the mass and natural frequencies are precisely the same in both X- and Y-direction. The fluid speed varies from low to high with the corresponding vortex shedding frequency varying from below the first natural frequency to above the second natural frequency of the flexible pipe. Particular emphasis was placed on the investigation of the relationship between in-line and cross-flow vibration. The experimental results analyzed by using these measurements exhibits several valuable features.     

浮式平台横荡运动对水下柔性立管涡激振动的影响

由于深水浮式平台的运动幅度较固定式平台增大,其运动与下部立管的动力耦合变得更加明显。研究了上部平台运动对水下立管涡激振动的影响,基于有限元数值模拟,建立了与结构运动耦合的立管尾迹流场的涡激升力、流体阻力模型,进行了"平台运动-立管涡激振动"整体系统的动响应数值模拟,分析了平台横荡运动的幅值、频率等因素对水下立管涡激振动的影响。结果表明,上部平台的振动会在沿着立管展向传播的过程中被放大(称为响应放大);与不考虑平台运动相比,立管的动响应位移增大了多倍,而且振幅放大倍数随着模态阶数的降低而增大;平台横荡振幅越大,立管振动幅值也越大,但是振幅放大倍数的变化不明显。     

Nonlinear dynamic analysis of deep water risers

The paper presents a theoretical and numerical approach to the dynamical behaviour of risers in deep water which takes into account two types of nonlinearity; that due to viscous drag forces and that due to the large displacements of the riser when submitted to strong axial loads. As the second nonlinearity may have a significant influence upon the behaviour of risers in deep water, a method for automatically updating the structural geometry during the dynamic analysis is given. A computer programme has been written for this purpose.