小直径组合桩的波浪力实验分析

本文给出小直径孤立桩、两个桩和2×2个桩的波浪作用力实验结果。在波浪水槽中以0°,45°,90°三个波浪方向测量了各桩所受的纵向力和横向力,文中讨论了组合桩之间的干扰效应,给出了干扰系数随KC数和桩距的变化。     

Fluid forces on a small cylinder in the presence of a large cylinder in relative oscillatory flow

The present brief paper is intended to show that the fluid forces on a small cylinder can be considerably magnified when it is in the flow field of a larger cylinder. Two cylinders of unequal diameter are oscillated in a tank of fluid, and the lift and in-line forces on the smaller cylinder are measured when the pair of cylinders is placed at various orientations and spacings.     

Hydrodynamic forces on partly buried tandem, twin pipelines in current

This study extends the investigations of the forces on a cylinder, laid on, or partly buried in the bed with a parallel twin dummy cylinder nearby and without it, and were determined by measuring the pressure distribution on the cylinder in the case of a steady current. The pressure distribution around the cylinder was measured by using pressure transducers. The forces on the cylinder were calculated by the integration of the measured pressures on the surface of the cylinder. Force coefficients were obtained for the ranges of Re=0.8×10⁴–1.5×10⁴ for the burial depth to diameter RATIO=0:0.7. The distance between axis of the measurement and dummy cylinders to diameter ratio (x/D) was 2, 1.5 and 1. The dummy cylinder was replaced downstream and upstream of the measurement cylinder.     

Experimental Measurements of Solitary Wave Attenuation Over Shallow and Intermediate Submerged Canopy

Attenuations of solitary wave over a patch of submerged canopy are experimentally investigated. The submerged canopy is modeled by a group of circular cylinder array. The decay coefficients of different wave heights in two water depths along the wave flume are measured for six canopy models, including two canopy heights and three styles of arrangements. The relationships among the decay coefficient, and the dimensionless wave height, submergence ratio, relative height and arrangement of the canopy are experimentally studied. 2D PIV technique is employed to measure the representative flow field inside the canopy. A four-deck flow structure is proposed for wave flow field over shallow submerged canopy. The characteristics of shear flow inside the aligned canopy region are discussed.     

五圆柱体结构群绕流特性及互扰效应研究

基于Fluent流体计算平台,运用大涡模拟方法对亚临界雷诺数Re=3900下“X”形排列五圆柱体结构群三维绕流特性进行研究,主要分析来流攻角α与间距比L/D两个关键参数对五圆柱体结构群的尾流区三维涡结构演化与流体力系数的影响,并揭示其内在流动互扰机理。研究表明:来流攻角和间距比的变化对五圆柱体结构群流动控制及互扰效应的影响显著。在小间距比工况下,观察到柱体群间隙区域内流体高速流动的现象,导致五圆柱体之间的互扰作用十分强烈。间隙流对中间圆柱体和下游圆柱体有较强的冲击作用,对其表面的流体力分布特性有显著的影响。另外,大间距比工况下,当α=0°与L/D≥5.0工况时,柱体群尾流效应强于其间隙流效应。当α=22.5°与L/D=7.0时,位于下游与中间处的圆柱体流体绕流特性存在较大差异。而当α=45°与L/D≥6.0时,位于上游与中间处的圆柱体尾流区均会产生正负交替的漩涡结构。     

Semi-analytical solution for the water wave diffraction by arrays of truncated circular cylinders in front of a vertical wall

The present study investigates the combined wave field that is induced by the continuous interaction of plane waves with an array of truncated circular cylinders in front of a rigid wall. The long-term goal of the study is the investigation of possible increase in the efficiency of cylindrical Wave Energy Converters (WECs) by putting in the vicinity of the array a barrier to propagation, a wall, that could assist the reflection of the incoming waves. The main task is to develop a generic solution method that is free of conceptual simplifications employed, e.g. by the method of images and the assumption of “pure” wave reflection. To cope with the set task, the proposed method relies on the semi-analytical formulation of the velocity potentials, while the solution is sought by combined expressions that involve polar and elliptical harmonics. The wall is represented as an elliptical cylinder with zero semi-minor axis. This assumption has eventually a beneficial effect to the underlying formulation given that it simplifies significantly the expansions of the involved diffraction potentials.     

多向不规则波浪作用下群墩结构上爬高的计算研究

波浪的方向分布对波浪的传播及其与工程结构物的作用都具有明显影响,目前现有的研究大多是基于单向波浪进行的。为了研究方向分布对群墩结构上的爬高影响,基于规则波浪与群墩作用的理论解,结合多向不规则波浪的造波方法,建立了多向不规则波浪与群墩作用的计算模型,同时进行了物理模型试验对模型的有效性进行了验证。系统地对群墩周围及表面上的波浪爬高进行了计算分析,结果表明,方向分布对波浪爬高具有较大的影响,且不同位置处的影响并不相同,在实际的工程设计中如果按照单向波浪计算,可能低估或者高估群墩周围的爬高。     

Numerical Simulation on Flow Past Two Side-by-Side Inclined Circular Cylinders at Low Reynolds Number

A series of three-dimensional numerical simulations is carried out to investigate the effect of inclined angle on flow behavior behind two side-by-side inclined cylinders at low Reynolds number Re=100 and small spacing ratio T/D=1.5 (T is the center-to-center distance between two side-by-side cylinders, D is the diameter of cylinder). The instantaneous and time-averaged flow fields, force coefficients and Strouhal numbers are analyzed. Special attention is focused on the axial flow characteristics with variation of the inclined angle. The results show that the inclined angle has a significant effect on the gap flow behaviors behind two inclined cylinders. The vortex shedding behind two cylinders is suppressed with the increase of the inclined angle as well as the flip-flop gap flow. Moreover, the mean drag coefficient, root-mean-square lift coefficient and Strouhal numbers decrease monotonously with the increase of the inclined angle, which follows the independent principle at small inclined angles.     

Non-stationary covariance function modelling in 2D least-squares collocation

Standard least-squares collocation (LSC) assumes 2D stationarity and 3D isotropy, and relies on a covariance function to account for spatial dependence in the observed data. However, the assumption that the spatial dependence is constant throughout the region of interest may sometimes be violated. Assuming a stationary covariance structure can result in over-smoothing of, e.g., the gravity field in mountains and under-smoothing in great plains. We introduce the kernel convolution method from spatial statistics for non-stationary covariance structures, and demonstrate its advantage for dealing with non-stationarity in geodetic data. We then compared stationary and non- stationary covariance functions in 2D LSC to the empirical example of gravity anomaly interpolation near the Darling Fault, Western Australia, where the field is anisotropic and non-stationary. The results with non-stationary covariance functions are better than standard LSC in terms of formal errors and cross-validation against data not used in the interpolation, demonstrating that the use of non-stationary covariance functions can improve upon standard (stationary) LSC.     

Buckling of multi-segment underwater pressure hull

Results of a numerical and experimental study into buckling performance of multi-segment pressure hull subjected to uniform hydrostatic pressure are discussed. Constituents of multi-segment configurations are bowed-out cylindrical shells with, and without flanges. Details about five collapse tests of laboratory scale mild steel, CNC machined models are given. Segments were about 200 mm diameter, 100 mm long and had uniform wall thickness of 3 mm. Experimental collapse pressures were in the range from 12 to 20 MPa. Numerical collapse pressures agreed well with those obtained during experiments.