INITIAL SEDIMENTATION OF WASTE PARTICLES DISCHARGED IN COASTAL WATERS

Based on a puff model . and together with the consideration of convection , dispersion and descent of suspended waste particles in marine environment , a numerical model is presented to predict the initial sedimentation of waste particles discharged from ocean outfalls in coastal waters and to compute the stable sedimentation rate in homogeneous trde current fields with water depth constant . When the time step selected is small enough , the results from this model agree well with that from the semi-analytical solution , and have sufficient precision for evaluating the impact on the environment caused by sedimentation of waste particles discharged from ocean outfalls. A numerical example is given for predicting the sedimentation of waste particles discharged in Heishijiao , Dalian .     

The carbohydrates in relation to mineralogic and granulometric composition of surface sediments in the karst estuary (River Krka estuary,Yugoslavia)

The investigation of mineral, granulometric and chemical composition of sediments of the River Krka estuary (Yugoslavia) were performed in order to elucidate the origin of the sediments and the pattern of sedimentation. Estuarine surface sediments were found to be fine-grained with a bimodal distribution. Environmental conditions in estuarine sediments favour conservation of the organic matter (anoxic conditions). The carbohydrates in the sediments were investigated to determine whether they are of terrigenous or authigenous origin. Glucose, galactose, mannose, xylose, rhamnose, glucosamine and glucuronic acid were detected in the sediments. Their mutual relationship indicates a preferentially terrigenous source of sedimented organic material in estuarine sediments.     

Techniques to measure grain-size distributions of loamy sediments: a comparative study of ten instruments for wet analysis

Ten instruments for measuring the grain‐size distribution of loamy sediments in water were tested in a comparative study. Instruments tested were: the Malvern Mastersizer S, the Coulter LS 200, the Fritsch Analysette 22 (version C), the Horiba Partica LA‐950, the Sedigraph 5100, the Atterberg cylinder, the Coulter Multisizer 3, the CIS‐100, the EyeTech and the image analysis software Histolab. The first four instruments use laser diffraction. The Sedigraph and Atterberg cylinder are based on sedimentation. The Coulter Multisizer 3 uses impedance measurements and the last three instruments use optical techniques. Grain‐size analyses were carried out on four sediments with median grain diameters of approximately 35, 30, 12 and 9 μm, respectively, and with no particles >90 μm. The laser diffraction instruments produced the best results for the various criteria considered in this study, followed by the Coulter Multisizer 3 (electrical sensing zone technique), the sedimentation techniques and the optical methods. However, the study also showed that there is no such thing as an ‘ideal’ method because techniques may score differently according to the criterion tested. An appropriate evaluation thus requires that various criteria be considered. Issues to be taken into account are: type of sediment, quantity of sediment available, speed of measurement, complexity of the measurement protocol, processing of the data, reproducibility of the results and the specific aims of the study undertaken.     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Anthropogenic affects on lake sedimentation process: a case study from Lake Sapanca, NW Turkey

Lake Sapanca in NW Turkey is a fault originated freshwater basin fed by seasonally variable flows of 15 streams. Considerations of lake–river interaction, supported by statistical measures of 47 bottom samples, suggest that sediment transport and deposition within the lake is controlled by two types of human constructed structures in addition to natural factors: (1) the dykes constructed in the front of streams, which feed the lake by strong flows, to prevent the filling of lakebed by coarse-grained sediments; (2) the constructed regulator on the outflowing Çarksuyu stream results in a higher sedimentation rate of clay-sized material on the NE corner of the lake, which is extraordinary in the shelf environment.     

Sedimentation settings of the Vendian Vanavara formation,the Siberian platform

A model of sedimentation settings is elaborated for siliciclastic deposits of the Vendian Vanavara Formation, the Katanga saddle, inner areas of the Siberian platform. Four lithologic complexes are distinguished in the formation. The lower complex is composed of proluvial continental deposits exemplifying a dejection cone of ephemeral streams. Its eroded surface is overlain by second complex largely represented by sandstones of coastal zone, which grade upward into siltstones and shales of deeper sedimentation settings (third complex). Sea transgression advanced in northeastern direction. The fourth complex resting with scouring on the third one was deposited in settings of a spacious shallow-water sea zone: in a tidal flat, sand shoals and islands. Sedimentological data are used to correlate more precisely the Vendian siliciclastic deposits of the Katanga saddle and northeastern Nepa-Botuoba anteclise, and to verify subdivision of the Vanavara Formation into subformations and character of its boundary with the overlying Oskoba Formation.     

Pelagic-Benthic Coupling in the Nordic Seas: The Role of Episodic Events

Abstract. The consequences of the following episodic phenomena for the pelagic-benthic coupling in the Nordic Seas are illustrated: (1) Advection of water masses between fjords and shelf environments, (2) freshwater run-off and vertical stability, (3) dynamics of the marginal ice zone in the central and northern Barents Sea and the Polar Ocean, (4) drift patterns of sinking particles along the North Norwegian coast, (5) advection of zooplankton into subarctic fjords and the southern Barents Sea, zooplankton overwintering and composition, and (6) transport of organic particulate matter from the Barents Sea shelf. It is shown that physical processes in the north-eastern North Atlantic and Polar Ocean can be strongly variable on time scales of days to decades. They have a significant influence on the dynamics of pelagic-benthic coupling. The physical oceanography influences the vertical and horizontal particle flux not only directly (mixing, advection, up- and down-welling), but also indirectly through its impact on the biota (for example radiation, wind, ice cover, freshwater run-off and overwintering, advection and retention of zooplankton). Understanding pelagic-benthic coupling at high latitudes depends even more on a best possible understanding of the physical oceanography and the time scales involved than elsewhere.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

Siltation Prediction for Navigation Channels and Harbour Basins on Muddy Beach

- This paper, after briefly reviewing the experimental research on sediment transport on muddy beach since the 1950s, improves and perfects the method for forecasting siltation in navigation channels and harbour basins which was first put forward in China by the authors. In consideration of silty sediment and sand, some factors in forecasting methods have been changed and modified. Consequently, the modified methods can be used either to compute siltation in navigation channels and harbour basins on muddy beach or to compute siltation and scouring in navigation channels and harbour basins on both silty beach and sandy beach. The verification of field data from eleven large, medium and small natural harbours shows a good agreement between the forecasting by the modified method and the natural conditions. Finally, the paper deals with the rational utilization of water area after the construction of the West Dyke in Lianyungang, the maintenance of water depth of the navigation channel at the entrance, siltation distribution, siltation in the navigation channel and harbour basin for ships of 100 thousand tonnnage. Results once again prove that the prospect of constructing Lianyungang Harbour into a deepwater harbour is bright.     

晚第四纪冲绳海槽北段CaCO3含量的时空变化及其控制因素

对取自冲绳海槽北段的6个沉积岩心进行了CaCO3含量、粒度和铀系同位素分析，结合氧同位素数据和海槽其他钻孔的相应结果，探讨了冲绳海槽北部晚第四纪以来CaCO3含量的垂向与横向变化特征。结果表明，冲绳海槽北段沉积总体上表现为全新世CaCO3含量高、晚更新世CaCO3含量低的“大西洋型”碳酸盐演化特征，但冲绳海槽北段和中部的碳酸盐演化特征并不一致，海槽内西坡、槽底和东坡的不同部位其演化特征也存在较大差异。碳酸盐含量的变化与沉积物粒度特征密切相关，晚第四纪冲绳海槽碳酸盐演化的时空差异是多种因素相互作用的结果。