GPS中BOC调制的FPGA实现

GPS系统中提出了一种新的信号形式,二进制偏移载波(BOC)调制是这种新的信号形式产生的技术关键。首先介绍了BOC调制的定义及其频谱特性,然后阐述了基于FPGA(现场可编程门阵列)硬件平台的BOC调制实现方法,并给出了仿真波形。结果表明,该实现方法是值得提倡的。     

差分观测与伪距观测的定位精度

严格论证了在对空间或地面目标的定位中,利用伪距测量观测模型的几何因子大于用台站间一次差分观测模型的几何因子.此外,台站间完全差分测量观测的定位精度优于不完全测量情形的定位精度.这些结果给人们在实际工作中采取何种定位方式提供了可靠的理论依据.     

Galileo系统及其在中国的应用

较详细地介绍了Galileo系统的全面体系结构、频率设计、服务内容及其广泛的应用范围，指出了它与GPS系统相比的优点，并对开发和增强Galileo系统在我国多层次、全方位的应用提出了建议。     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

基于矢量信号处理的水声定位系统

将传统的水声定位系统与矢量水听器相结合，设计了一种全新的轻便型长基线被动水声定位系统。介绍了系统的组成和工作原理，并结合近年来出现的矢量信号处理技术，设计了新的实时信号处理软件。经湖试和海试，系统的可行性得到了初步的验证。     

地球信息科学的研究与发展

信息时代的召唤,地球信息科学应运而生.经过10a左右的发展,地理信息科学已见雏形.总结了10a来地球信息科学的研究结果,并介绍了地球信息科学的研究内容和发展前景.     

动力定位系统与单波束测深仪在科考船定点作业中的应用

科考船定点作业时会受到海洋风、涌、浪、流等外界环境因素影响，导致工作效率降低，原位测量精度下降，甚至影响作业安全。动力定位系统 （DP） 具有自动定位功能，能够抵抗外界环境因素的影响，可实现科考船高精度定点控位。 单波束测深仪不仅可以测量水深，也可反映水下设备深度信息，可以起到辅助监控水下设备功能。本文在介绍定点作业施工现状与局限性的基础上，分析 DP 系统与单波束测深仪工作原理，以“向阳红 01”船为载体，在定点作业时开启 DP 系统与单波束测深仪，发现该方法可以提高科考船定点作业工作效率、原位测量精度并保障作业安全，可为其他科考船定点作业提供参考。     

On dynamic coupling effects between a spar and its mooring lines

The responses of a spar constrained by slack mooring lines to steep ocean waves and tensions in the mooring lines are simulated using two different numerical schemes: a quasi-static approach (SMACOS) and a coupled dynamic approach (COUPLE). The two approaches are the same in computing wave loads on the structure. Their difference is in modeling dynamic forces of mooring lines; that is the dynamic forces are included in the computation of COUPLE but neglected in SMACOS. The numerical simulation is examined against the laboratory measurements of the JIP Spar in a water depth of 318 m. The dynamic coupling effects between the JIP Spar and its mooring lines in different water depths (318, 618 and 1018 m) are investigated by the comparison of numerical simulations obtained using the quasi-static and coupled dynamic approaches. It is found that the damping of mooring lines reduces the slow-drift surge and pitch of the Spar, especially in deep water. The reduction in the amplitude of slow-drift surge can reach about 10% in a water depth of 1018 m. The tension in mooring lines may greatly increase in the wave frequency range when dynamic forces in mooring lines are considered. The mooring-line tension in the wave frequency range predicted by the coupled dynamic approach can be eight times as great as the corresponding prediction by the quasi-static approach in a water depth of 1018 m. This finding may have important implications for the estimation of the fatigue strength and life span of the mooring lines deployed in deep water oceans.